Re: [PATCH 2/2] clk: sunxi-ng: h616: Let the S/PDIF clock set the audio PLL rate

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Dne torek, 10. november 2026 ob 07:03:01 Srednjeevropski standardni čas je Arun Iyengar via B4 Relay napisal(a):
> From: Arun Iyengar <aiyengar1990@gmail.com>
> 
> sun4i-spdif asks for 22.5792 or 24.576 MHz on the S/PDIF (OWA) module
> clock, depending on the sample rate family. The spdif clock has no
> CLK_SET_RATE_PARENT, so it can only divide down the rate pll-audio
> already runs at. Unless another audio device has already set the PLL for
> the right family, the power-of-two divider rounds down and the request
> succeeds at a wrong rate: about 12.3 MHz from the reset PLL value, so
> 48 kHz content is sent at about 24 kHz.
> 
> Propagate rate changes to the parent, like the audio codec clocks
> already do. This is the same change as the one just applied for the H6
> [1].
> 
> Link: https://lore.kernel.org/all/20261104185027.883011-1-jernej.skrabec@gmail.com/ [1]

There is no need to link to H6 patch. It's clear that patch is needed.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> Fixes: 88dde5e23da1 ("clk: sunxi-ng: Add support for the Allwinner H616 CCU")
> Cc: stable@vger.kernel.org
> Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
> ---
>  drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> index d2625fec651a..f703d690a563 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> @@ -529,7 +529,7 @@ static struct ccu_div spdif_clk = {
>  		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
>  						      audio_parents,
>  						      &ccu_div_ops,
> -						      0),
> +						      CLK_SET_RATE_PARENT),
>  	},
>  };
>  
> 
>