From: Luke Jones <luke@ljones.dev>
To: hdegoede@redhat.com
Cc: pobrn@protonmail.com, mgross@linux.intel.com,
corentin.chary@gmail.com, platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org,
acpi4asus-user@lists.sourceforge.net
Subject: Re: [PATCH 3/4] asus-wmi: Add egpu enable method
Date: Sat, 17 Jul 2021 20:15:30 +1200 [thread overview]
Message-ID: <UXQDWQ.MHGH7K6W57R5@ljones.dev> (raw)
In-Reply-To: <20210717081323.7925-3-luke@ljones.dev>
Apologies, I forgot that the patches contain sequence. There is
actually no 4th patch (the patch itself was already upstreamed).
Sincere regards,
Luke.
On Sat, Jul 17 2021 at 20:13:23 +1200, Luke D. Jones <luke@ljones.dev>
wrote:
> The X13 Flow laptops can utilise an external GPU. This requires
> toggling an ACPI method which will first disable the internal
> dGPU, and then enable the eGPU.
>
> Signed-off-by: Luke D. Jones <luke@ljones.dev>
> ---
> drivers/platform/x86/asus-wmi.c | 91
> ++++++++++++++++++++++
> include/linux/platform_data/x86/asus-wmi.h | 3 +
> 2 files changed, 94 insertions(+)
>
> diff --git a/drivers/platform/x86/asus-wmi.c
> b/drivers/platform/x86/asus-wmi.c
> index 02762a60d27a..ee5d8656641e 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -210,6 +210,9 @@ struct asus_wmi {
> u8 fan_boost_mode_mask;
> u8 fan_boost_mode;
>
> + bool egpu_enable_available; // 0 = enable
> + bool egpu_enable;
> +
> bool dgpu_disable_available;
> bool dgpu_disable;
>
> @@ -430,6 +433,86 @@ static void
> lid_flip_tablet_mode_get_state(struct asus_wmi *asus)
> }
> }
>
> +/* eGPU
> ********************************************************************/
> +static int egpu_enable_check_present(struct asus_wmi *asus)
> +{
> + u32 result;
> + int err;
> +
> + asus->egpu_enable_available = false;
> +
> + err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_EGPU, &result);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + if (result & ASUS_WMI_DSTS_PRESENCE_BIT) {
> + asus->egpu_enable_available = true;
> + asus->egpu_enable = result & ASUS_WMI_DSTS_STATUS_BIT;
> + }
> +
> + return 0;
> +}
> +
> +static int egpu_enable_write(struct asus_wmi *asus)
> +{
> + int err;
> + u8 value;
> + u32 retval;
> +
> + value = asus->egpu_enable;
> +
> + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, value, &retval);
> +
> + if (err) {
> + pr_warn("Failed to set egpu disable: %d\n", err);
> + return err;
> + }
> +
> + if (retval > 1 || retval < 0) {
> + pr_warn("Failed to set egpu disable (retval): 0x%x\n", retval);
> + return -EIO;
> + }
> +
> + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "egpu_enable");
> +
> + return 0;
> +}
> +
> +static ssize_t egpu_enable_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> + bool mode = asus->egpu_enable;
> +
> + return sysfs_emit(buf, "%d\n", mode);
> +}
> +
> +static ssize_t egpu_enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int result;
> + bool disable;
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + result = kstrtobool(buf, &disable);
> + if (result == -EINVAL)
> + return result;
> +
> + asus->egpu_enable = disable;
> +
> + result = egpu_enable_write(asus);
> + if (result != 0)
> + return result;
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(egpu_enable);
> +
> /* dGPU
> ********************************************************************/
> static int dgpu_disable_check_present(struct asus_wmi *asus)
> {
> @@ -2502,6 +2585,7 @@ static struct attribute *platform_attributes[]
> = {
> &dev_attr_camera.attr,
> &dev_attr_cardr.attr,
> &dev_attr_touchpad.attr,
> + &dev_attr_egpu_enable.attr,
> &dev_attr_dgpu_disable.attr,
> &dev_attr_lid_resume.attr,
> &dev_attr_als_enable.attr,
> @@ -2529,6 +2613,8 @@ static umode_t asus_sysfs_is_visible(struct
> kobject *kobj,
> devid = ASUS_WMI_DEVID_LID_RESUME;
> else if (attr == &dev_attr_als_enable.attr)
> devid = ASUS_WMI_DEVID_ALS_ENABLE;
> + else if (attr == &dev_attr_egpu_enable.attr)
> + ok = asus->egpu_enable_available;
> else if (attr == &dev_attr_dgpu_disable.attr)
> ok = asus->dgpu_disable_available;
> else if (attr == &dev_attr_fan_boost_mode.attr)
> @@ -2792,6 +2878,10 @@ static int asus_wmi_add(struct platform_device
> *pdev)
> if (err)
> goto fail_platform;
>
> + err = egpu_enable_check_present(asus);
> + if (err)
> + goto fail_egpu_enable;
> +
> err = dgpu_disable_check_present(asus);
> if (err)
> goto fail_dgpu_disable;
> @@ -2896,6 +2986,7 @@ static int asus_wmi_add(struct platform_device
> *pdev)
> fail_sysfs:
> fail_throttle_thermal_policy:
> fail_fan_boost_mode:
> +fail_egpu_enable:
> fail_dgpu_disable:
> fail_platform:
> fail_panel_od:
> diff --git a/include/linux/platform_data/x86/asus-wmi.h
> b/include/linux/platform_data/x86/asus-wmi.h
> index a528f9d0e4b7..17dc5cb6f3f2 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -90,6 +90,9 @@
> /* Keyboard dock */
> #define ASUS_WMI_DEVID_KBD_DOCK 0x00120063
>
> +/* dgpu on/off */
> +#define ASUS_WMI_DEVID_EGPU 0x00090019
> +
> /* dgpu on/off */
> #define ASUS_WMI_DEVID_DGPU 0x00090020
>
> --
> 2.31.1
>
next prev parent reply other threads:[~2021-07-17 8:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-17 8:13 [PATCH 1/4] asus-wmi: Add panel overdrive functionality Luke D. Jones
2021-07-17 8:13 ` [PATCH 2/4] asus-wmi: Add dgpu disable method Luke D. Jones
2021-07-17 16:05 ` Hans de Goede
2021-07-24 11:37 ` Luke Jones
2021-08-02 10:55 ` Hans de Goede
2021-07-17 8:13 ` [PATCH 3/4] asus-wmi: Add egpu enable method Luke D. Jones
2021-07-17 8:15 ` Luke Jones [this message]
2021-07-17 8:19 ` Luke Jones
2021-07-17 15:57 ` Hans de Goede
2021-07-24 11:15 ` Luke Jones
2021-07-17 16:05 ` Hans de Goede
2021-07-17 16:00 ` [PATCH 1/4] asus-wmi: Add panel overdrive functionality Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=UXQDWQ.MHGH7K6W57R5@ljones.dev \
--to=luke@ljones.dev \
--cc=acpi4asus-user@lists.sourceforge.net \
--cc=corentin.chary@gmail.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=pobrn@protonmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.