From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Mark Brown <broonie@kernel.org>,
linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for SDX55
Date: Thu, 26 Nov 2020 11:35:48 -0600 [thread overview]
Message-ID: <X7/ndJsUbRkdmQPq@builder.lan> (raw)
In-Reply-To: <20201126093018.1085594-2-vkoul@kernel.org>
On Thu 26 Nov 03:30 CST 2020, Vinod Koul wrote:
> Add support from RPMH regulators found in SDX55 platform
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index d488325499a9..e673d48b31a1 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
> {},
> };
>
> +static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, "vdd-s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic5_hfsmps510, "vdd-s7"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l9"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l12"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l7-l8"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l7-l8"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l3-l9"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l10-l11-l13"),
> + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l10-l11-l13"),
> + RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo, "vdd-l4-l12"),
> + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l10-l11-l13"),
> + RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14"),
> + RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l15"),
> + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l16"),
> + {},
> +};
> +
> static int rpmh_regulator_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
> .compatible = "qcom,pm6150l-rpmh-regulators",
> .data = pm6150l_vreg_data,
> },
> + {
> + .compatible = "qcom,pmx55-rpmh-regulators",
> + .data = pmx55_vreg_data,
> + },
> {}
> };
> MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
> --
> 2.26.2
>
next prev parent reply other threads:[~2020-11-26 17:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-26 9:30 [PATCH 1/2] regulator: dt-bindings: Add PMX55 compatibles Vinod Koul
2020-11-26 9:30 ` [PATCH 2/2] regulator: qcom-rpmh: Add support for SDX55 Vinod Koul
2020-11-26 17:35 ` Bjorn Andersson [this message]
2020-11-26 17:35 ` [PATCH 1/2] regulator: dt-bindings: Add PMX55 compatibles Bjorn Andersson
2020-11-26 20:06 ` Mark Brown
2020-12-29 20:15 ` patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X7/ndJsUbRkdmQPq@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.