From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Mark Brown <broonie@kernel.org>,
linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/2] regulator: qcom-rpmh: Add support for PM8350/PM8350c
Date: Thu, 3 Dec 2020 17:45:17 -0600 [thread overview]
Message-ID: <X8l4jThf8XlRnyjy@builder.lan> (raw)
In-Reply-To: <20201203071244.2652297-2-vkoul@kernel.org>
On Thu 03 Dec 01:12 CST 2020, Vinod Koul wrote:
> Add support from RPMH regulators found in PM8350 and PM8350c PMICs
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index d488325499a9..800072b90efd 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -865,6 +865,60 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
> {},
> };
>
> +static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
> + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"),
> + RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"),
> + RPMH_VREG("smps10", "smp%s10", &pmic5_hfsmps510, "vdd-s10"),
> + RPMH_VREG("smps11", "smp%s11", &pmic5_hfsmps510, "vdd-s11"),
> + RPMH_VREG("smps12", "smp%s12", &pmic5_hfsmps510, "vdd-s12"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l4"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l7"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l5"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l5"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9-l10"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l2-l7"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"),
> + {},
> +};
> +
> +static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
> + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
> + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
> + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
> + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
> + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
> + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
> + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
> + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"),
> + RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"),
> + RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l12"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo_lv, "vdd-l2-l8"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l9-l11"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l2-l8"),
> + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l6-l9-l11"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l10"),
> + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l6-l9-l11"),
> + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l1-l12"),
> + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
> + RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
> + {},
> +};
> +
> static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
> RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
> RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"),
> @@ -984,6 +1038,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
> .compatible = "qcom,pm8150l-rpmh-regulators",
> .data = pm8150l_vreg_data,
> },
> + {
> + .compatible = "qcom,pm8350-rpmh-regulators",
> + .data = pm8350_vreg_data,
> + },
> + {
> + .compatible = "qcom,pm8350c-rpmh-regulators",
> + .data = pm8350c_vreg_data,
> + },
> {
> .compatible = "qcom,pm8998-rpmh-regulators",
> .data = pm8998_vreg_data,
> --
> 2.26.2
>
next prev parent reply other threads:[~2020-12-03 23:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-03 7:12 [PATCH 1/2] regulator: dt-bindings: Add PM8350x compatibles Vinod Koul
2020-12-03 7:12 ` [PATCH 2/2] regulator: qcom-rpmh: Add support for PM8350/PM8350c Vinod Koul
2020-12-03 23:45 ` Bjorn Andersson [this message]
2020-12-03 23:33 ` [PATCH 1/2] regulator: dt-bindings: Add PM8350x compatibles Bjorn Andersson
2020-12-04 23:31 ` Mark Brown
2020-12-29 20:15 ` patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X8l4jThf8XlRnyjy@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.