All of lore.kernel.org
 help / color / mirror / Atom feed
From: jon bird <news@onastick.clara.co.uk>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Nova/dib0700/i2C write failed
Date: Fri, 28 Nov 2008 15:02:28 +0000	[thread overview]
Message-ID: <XE4pEqAEgAMJFw9N@onasticksoftware.net> (raw)
In-Reply-To: <1227819747.7014.58.camel@watkins-desktop>

In article <1227819747.7014.58.camel@watkins-desktop>, Robert Watkins 
<robert@watkin5.net> writes
>On Thu, 2008-11-27 at 09:48 +0100, Holger Rusch wrote:
>  As written before.
>  I got an MB with SB700 USB Chipset and it seems to have the same
>  problems as the SB600 with the USB ports (disconnects here and
>  then).
>  The SB400 seems to have them also?
>
[...]

>My Hauppauge Nova-T 500 Dual DVB-T is a PCI card with built in VIA USB
>controller.
>
>watkins@watkins-desktop:~$ lspci -vv | grep -i usb
>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
>Controller (rev 80) (prog-if 10 [OHCI])
>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
>Controller (rev 80) (prog-if 10 [OHCI])
>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
>Controller (rev 80) (prog-if 20 [EHCI])
>02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>Controller (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>02:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>Controller (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>02:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
>(prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0
>
Here's mine:

/usr/local/sbin/lspci -v | grep -i usb
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80) (prog-if 00 [UHCI])
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80) (prog-if 00 [UHCI])
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80) (prog-if 00 [UHCI])
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 
20 [EHCI])

so could be the same chipset as on your PCI card but it's not an SBxxx 
chipset. If it *is* the controller mind you would expect it to be 
susceptible to all sorts of USB devices not just this one.

-- 
== jon bird - software engineer
== <reply to address _may_ be invalid, real mail below>
== <reduce rsi, stop using the shift key>
== posted as: news 'at' onastick 'dot' clara.co.uk


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-11-28 15:03 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-22 21:43 [linux-dvb] Nova/dib0700/i2C write failed jon bird
2008-11-24 11:04 ` Holger Rusch
2008-11-24 19:34   ` jon bird
2008-11-24 20:02     ` Nicolas Will
2008-11-24 21:29       ` Richard Palmer
2008-11-25 20:19         ` Robert Watkins
2008-11-25 20:29           ` Devin Heitmueller
2008-11-27  8:48             ` Holger Rusch
2008-11-27 21:02               ` Robert Watkins
2008-11-28 15:02                 ` jon bird [this message]
2008-11-28 16:15                   ` Holger Rusch
2008-11-27 20:21             ` Robert Watkins
2008-11-25 19:30       ` jon bird

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=XE4pEqAEgAMJFw9N@onasticksoftware.net \
    --to=news@onastick.clara.co.uk \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.