From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
To: jassisinghbrar@gmail.com
Cc: u-boot@lists.denx.de, etienne.carriere@linaro.org,
trini@konsulko.com, sjg@chromium.org, sughosh.ganu@linaro.org,
xypron.glpk@gmx.de, patrick.delaunay@foss.st.com,
patrice.chotard@foss.st.com,
Jassi Brar <jaswinder.singh@linaro.org>
Subject: Re: [PATCHv4 2/5] fwu: move meta-data management in core
Date: Thu, 23 Feb 2023 10:35:58 +0200 [thread overview]
Message-ID: <Y/clbrxovaLjvdAh@hera> (raw)
In-Reply-To: <20230205030146.61432-1-jassisinghbrar@gmail.com>
Hi Jassi,
Apologies for the delay
On Sat, Feb 04, 2023 at 09:01:46PM -0600, jassisinghbrar@gmail.com wrote:
> From: Jassi Brar <jaswinder.singh@linaro.org>
>
> Instead of each i/f having to implement their own meta-data verification
> and storage, move the logic in common code. This simplifies the i/f code
> much simpler and compact.
>
> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
> ---
> drivers/fwu-mdata/fwu-mdata-uclass.c | 34 +++++++
> include/fwu.h | 41 ++++++++
> lib/fwu_updates/fwu.c | 135 ++++++++++++++++++++++++++-
> 3 files changed, 206 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/fwu-mdata/fwu-mdata-uclass.c b/drivers/fwu-mdata/fwu-mdata-uclass.c
> index b477e9603f..e03773c584 100644
> --- a/drivers/fwu-mdata/fwu-mdata-uclass.c
> +++ b/drivers/fwu-mdata/fwu-mdata-uclass.c
> @@ -16,6 +16,40 @@
> #include <linux/types.h>
> #include <u-boot/crc.h>
>
> +/**
> + * fwu_read_mdata() - Wrapper around fwu_mdata_ops.read_mdata()
> + *
> + * Return: 0 if OK, -ve on error
> + */
> +int fwu_read_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary)
> +{
> + const struct fwu_mdata_ops *ops = device_get_ops(dev);
> +
> + if (!ops->read_mdata) {
> + log_debug("read_mdata() method not defined\n");
> + return -ENOSYS;
> + }
> +
> + return ops->read_mdata(dev, mdata, primary);
> +}
> +
> +/**
> + * fwu_write_mdata() - Wrapper around fwu_mdata_ops.write_mdata()
> + *
> + * Return: 0 if OK, -ve on error
> + */
> +int fwu_write_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary)
> +{
> + const struct fwu_mdata_ops *ops = device_get_ops(dev);
> +
> + if (!ops->write_mdata) {
> + log_debug("write_mdata() method not defined\n");
> + return -ENOSYS;
> + }
> +
> + return ops->write_mdata(dev, mdata, primary);
> +}
> +
> /**
> * fwu_get_mdata_part_num() - Get the FWU metadata partition numbers
> * @dev: FWU metadata device
> diff --git a/include/fwu.h b/include/fwu.h
> index 0919ced812..1a700c9e6a 100644
> --- a/include/fwu.h
> +++ b/include/fwu.h
> @@ -24,6 +24,26 @@ struct fwu_mdata_gpt_blk_priv {
> * @update_mdata() - Update the FWU metadata copy
> */
> struct fwu_mdata_ops {
> + /**
> + * read_mdata() - Populate the asked FWU metadata copy
> + * @dev: FWU metadata device
> + * @mdata: Copy of the FWU metadata
> + * @primary: If primary or secondary copy of meta-data is to be read
> + *
> + * Return: 0 if OK, -ve on error
> + */
> + int (*read_mdata)(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
> +
> + /**
> + * write_mdata() - Write the given FWU metadata copy
> + * @dev: FWU metadata device
> + * @mdata: Copy of the FWU metadata
> + * @primary: If primary or secondary copy of meta-data is to be written
> + *
> + * Return: 0 if OK, -ve on error
> + */
> + int (*write_mdata)(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
> +
> /**
> * check_mdata() - Check if the FWU metadata is valid
> * @dev: FWU device
> @@ -126,6 +146,27 @@ struct fwu_mdata_ops {
> EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
> 0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
>
> +/**
> + * fwu_read_mdata() - Wrapper around fwu_mdata_ops.read_mdata()
> + */
> +int fwu_read_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
> +
> +/**
> + * fwu_write_mdata() - Wrapper around fwu_mdata_ops.write_mdata()
> + */
> +int fwu_write_mdata(struct udevice *dev, struct fwu_mdata *mdata, bool primary);
> +
> +/**
> + * fwu_get_verified_mdata() - Read, verify and return the FWU metadata
> + *
> + * Read both the metadata copies from the storage media, verify their checksum,
> + * and ascertain that both copies match. If one of the copies has gone bad,
> + * restore it from the good copy.
> + *
> + * Return: 0 if OK, -ve on error
> +*/
> +int fwu_get_verified_mdata(struct fwu_mdata *mdata);
> +
> /**
> * fwu_check_mdata_validity() - Check for validity of the FWU metadata copies
> *
> diff --git a/lib/fwu_updates/fwu.c b/lib/fwu_updates/fwu.c
> index 5313d07302..56299f1b2f 100644
> --- a/lib/fwu_updates/fwu.c
> +++ b/lib/fwu_updates/fwu.c
> @@ -15,13 +15,13 @@
> #include <linux/errno.h>
> #include <linux/types.h>
>
> +#include <u-boot/crc.h>
> +
> +static struct fwu_mdata g_mdata; /* = {0} makes uninit crc32 always invalid */
> +static struct udevice *g_dev;
> static u8 in_trial;
> static u8 boottime_check;
>
> -#include <linux/errno.h>
> -#include <linux/types.h>
> -#include <u-boot/crc.h>
> -
> enum {
> IMAGE_ACCEPT_SET = 1,
> IMAGE_ACCEPT_CLEAR,
> @@ -161,6 +161,133 @@ static int fwu_get_image_type_id(u8 *image_index, efi_guid_t *image_type_id)
> return -ENOENT;
> }
>
> +/**
> + * fwu_sync_mdata() - Update given meta-data partition(s) with the copy provided
> + * @mdata: FWU metadata structure
> + * @part: Bitmask of FWU metadata partitions to be written to
> + *
> + * Return: 0 if OK, -ve on error
> + */
> +static int fwu_sync_mdata(struct fwu_mdata *mdata, int part)
> +{
> + void *buf = &mdata->version;
> + int err = 0;
> +
> + /*
> + * Calculate the crc32 for the updated FWU metadata
> + * and put the updated value in the FWU metadata crc32
> + * field
> + */
> + mdata->crc32 = crc32(0, buf, sizeof(*mdata) - sizeof(u32));
> +
> + err = fwu_write_mdata(g_dev, mdata, part & PRIMARY_PART ? true : false);
> + if (err) {
> + log_err("Unable to write %s mdata\n",
> + part & PRIMARY_PART ? "primary": "secondary");
> + return err;
> + }
> +
> + /* update the cached copy of meta-data */
> + memcpy(&g_mdata, mdata, sizeof(struct fwu_mdata));
> +
> + return 0;
> +}
> +
> +static inline int mdata_crc_check(struct fwu_mdata *mdata)
> +{
> + void *buf = &mdata->version;
> + u32 calc_crc32 = crc32(0, buf, sizeof(*mdata) - sizeof(u32));
> +
> + return calc_crc32 == mdata->crc32 ? 0 : -EINVAL;
> +}
> +
> +/**
> + * fwu_get_verified_mdata() - Read, verify and return the FWU metadata
> + *
> + * Read both the metadata copies from the storage media, verify their checksum,
> + * and ascertain that both copies match. If one of the copies has gone bad,
> + * restore it from the good copy.
> + *
> + * Return: 0 if OK, -ve on error
> + */
> +int fwu_get_verified_mdata(struct fwu_mdata *mdata)
> +{
> + int err;
> + bool pri_ok, sec_ok;
> + struct fwu_mdata s, *p_mdata, *s_mdata;
> +
> + p_mdata = &g_mdata;
> + s_mdata = &s;
> +
> + /* if mdata already read and ready */
> + err = mdata_crc_check(p_mdata);
> + if (!err)
> + goto ret_mdata;
> + /* else read, verify and, if needed, fix mdata */
> +
> + pri_ok = false;
> + err = fwu_read_mdata(g_dev, p_mdata, true);
> + if (!err) {
> + err = mdata_crc_check(p_mdata);
> + if (!err)
> + pri_ok = true;
> + else
> + log_debug("primary mdata: crc32 failed\n");
> + }
> +
> + sec_ok = false;
> + err = fwu_read_mdata(g_dev, s_mdata, false);
> + if (!err) {
> + err = mdata_crc_check(s_mdata);
> + if (!err)
> + sec_ok = true;
> + else
> + log_debug("secondary mdata: crc32 failed\n");
> + }
Isn't it better to define pri_ok, sec_ok and their equivalent mdata as
arrays ? IOW something along the lines of
bool parts_ok[2] = { false };
struct fwu_mdata parts_mdata[2];
parts_mdata[0] = &g_mdata;
parts_mdata[1] = .....
for (i = 0; i < 2; i++) {
err = fwu_read_mdata(g_dev, parts_mdata[i], !(i % 2) ? true : false);
if (!err)
err = mdata_crc_check(parts_mdata[i]);
etc....
}
> +
> + if (pri_ok && sec_ok) {
And then also adjust this part?
> + /*
> + * Before returning, check that both the
> + * FWU metadata copies are the same.
> + */
> + err = memcmp(p_mdata, s_mdata, sizeof(struct fwu_mdata));
> + if (!err)
> + goto ret_mdata;
> +
> + /*
> + * If not, populate the secondary partition from the
> + * primary partition copy.
> + */
> + log_info("Both FWU metadata copies are valid but do not match.");
> + log_info(" Restoring the secondary partition from the primary\n");
> + sec_ok = false;
> + }
> +
> + if (!pri_ok) {
> + memcpy(p_mdata, s_mdata, sizeof(struct fwu_mdata));
> + err = fwu_sync_mdata(p_mdata, PRIMARY_PART);
> + if (err) {
> + log_debug("mdata : primary write failed\n");
> + return err;
> + }
> + }
> +
> + if (!sec_ok) {
> + memcpy(s_mdata, p_mdata, sizeof(struct fwu_mdata));
> + err = fwu_sync_mdata(s_mdata, SECONDARY_PART);
> + if (err) {
> + log_debug("mdata : secondary write failed\n");
> + return err;
> + }
> + }
And this could also be folded into a for loop
> +
> +ret_mdata:
> + if (!err && mdata)
> + memcpy(mdata, p_mdata, sizeof(struct fwu_mdata));
> +
> + return err;
> +}
> +
> /**
> * fwu_verify_mdata() - Verify the FWU metadata
> * @mdata: FWU metadata structure
> --
> 2.34.1
>
Thanks
/Ilias
next prev parent reply other threads:[~2023-02-23 8:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-05 3:00 [PATCHv4 0/5] FWU: Handle meta-data in common code jassisinghbrar
2023-02-05 3:01 ` [PATCHv4 1/5] fwu: gpt: use cached meta-data partition numbers jassisinghbrar
2023-02-05 3:01 ` [PATCHv4 2/5] fwu: move meta-data management in core jassisinghbrar
2023-02-23 8:35 ` Ilias Apalodimas [this message]
2023-02-28 1:52 ` Jassi Brar
2023-02-27 16:30 ` Etienne Carriere
2023-02-27 16:46 ` Jassi Brar
2023-02-27 23:15 ` Etienne Carriere
2023-02-05 3:01 ` [PATCHv4 3/5] fwu: gpt: implement read_mdata and write_mdata callbacks jassisinghbrar
2023-02-05 3:02 ` [PATCHv4 4/5] fwu: meta-data: switch to management by common code jassisinghbrar
2023-02-21 18:23 ` Tom Rini
2023-02-23 8:37 ` Ilias Apalodimas
2023-02-05 3:02 ` [PATCHv4 5/5] fwu: rename fwu_get_verified_mdata to fwu_get_mdata jassisinghbrar
2023-02-06 22:00 ` [PATCHv4 0/5] FWU: Handle meta-data in common code Simon Glass
2023-02-21 20:08 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y/clbrxovaLjvdAh@hera \
--to=ilias.apalodimas@linaro.org \
--cc=etienne.carriere@linaro.org \
--cc=jassisinghbrar@gmail.com \
--cc=jaswinder.singh@linaro.org \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=sjg@chromium.org \
--cc=sughosh.ganu@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.