From: Matthias Kaehlcke <mka@chromium.org>
To: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, agross@kernel.org,
andersson@kernel.org, konrad.dybcio@linaro.org,
linux-kernel@vger.kernel.org, bhupesh.linux@gmail.com,
robh+dt@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
Date: Thu, 9 Feb 2023 16:21:14 +0000 [thread overview]
Message-ID: <Y+UdetQklamQUehi@google.com> (raw)
In-Reply-To: <20230208122718.338545-1-bhupesh.sharma@linaro.org>
On Wed, Feb 08, 2023 at 05:57:18PM +0530, Bhupesh Sharma wrote:
> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
> Add the debug uart node in sm6115 dtsi file.
Is there anything special about SE4 that makes it *the* debug
UART or does it just happen to be the UART that is used by the
reference board? I suspect the latter, in which case the
"qcom,geni-debug-uart" string should be set/overwritten in the
board file as in sc7280-qcard.dtsi or sc8280xp-crd.dts.
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> Changes since v1:
> - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20221128171215.1768745-1-bhupesh.sharma@linaro.org/
> - Addressed Konrad's review comments on v1.
> - Rebased againt latest linux-next/master which now has the 'qupv3_id_0' node
> already in the dtsi file, so just add the debug uart node in v2.
>
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 50cb8a82ecd5..3eccfb8c16ce 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -963,6 +963,15 @@ spi4: spi@4a90000 {
> status = "disabled";
> };
>
> + uart4: serial@4a90000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0x04a90000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> i2c5: i2c@4a94000 {
> compatible = "qcom,geni-i2c";
> reg = <0x04a94000 0x4000>;
> @@ -992,7 +1001,6 @@ spi5: spi@4a94000 {
> dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> - status = "disabled";
> };
> };
>
> --
> 2.38.1
>
prev parent reply other threads:[~2023-02-09 16:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 12:27 [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0 Bhupesh Sharma
2023-02-09 4:22 ` Bjorn Andersson
2023-02-09 15:11 ` Krzysztof Kozlowski
2023-02-09 16:00 ` Krzysztof Kozlowski
2023-02-09 16:21 ` Matthias Kaehlcke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y+UdetQklamQUehi@google.com \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bhupesh.sharma@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.