Re: [PATCH V3 0/4] Add tbench/gitsource new test cases for amd-pstate-ut

[Huang Rui <ray.huang@amd.com>]

On Mon, Oct 17, 2022 at 10:34:18AM +0800, Huang Rui wrote:
> On Wed, Sep 14, 2022 at 02:11:01PM +0800, Meng, Li (Jassmine) wrote:
> > Hi all:
> > 
> > First, we modify amd-pstate-ut.sh to basic.sh as a basic test, mainly for
> > AMD P-State kernel drivers. The purpose of this modification is to
> > facilitate the subsequent addition of gitsource, tbench and other tests.
> > You can test specific functions by specifying test cases.
> > Default test all cases, include basic, tbench and gitsource etc.
> > 
> > Secondly, add tbench.sh trigger the tbench testing and monitor the cpu
> > information.
> > 1) Download and install tbench codes.
> > 2) Run tbench benchmark on specific governors, ondemand or schedutil.
> > 3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
> > 4) Get desire performance, frequency, load by perf.
> > 5) Get power consumption and throughput by amd_pstate_trace.py.
> > 6) Analyse test results and save it in file selftest.tbench.csv. 
> > 7) Plot png images about performance, energy and performance per watt
> > for each test.
> > 
> > Third, add gitsource.sh trigger the gitsource testing and monitor the cpu
> > information.
> > 1) Download and tar gitsource codes.
> > 2) Run gitsource benchmark on specific governors, ondemand or schedutil.
> > 3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
> > 4) Get desire performance, frequency, load by perf.
> > 5) Get power consumption and throughput by amd_pstate_trace.py.
> > 6) Get run time by /usr/bin/time.
> > 7) Analyse test results and save it in file selftest.gitsource.csv. 
> > 8) Plot png images about time, energy and performance per watt
> > for each test.
> > 
> 
> The cover letter won't be included into kernel commit. Above steps
> are even clearer than the original patch commit message. So I suggest you
> can move them into related commit log.
> 
> TBench steps -> Patch 2
> Gitsource steps -> Patch 3
> 
> Thanks,
> Ray
> 
> > Finally, modify rst document to introduce test steps and results etc.
> > 
> > See patch series in below git repo:
> > V1:https://lore.kernel.org/lkml/20220706073622.672135-1-li.meng@amd.com/
> > V2:https://lore.kernel.org/lkml/20220804054414.1510764-1-li.meng@amd.com/
> > 
> > Changes from V1->V2:
> > - selftests: amd-pstate: basic
> > - - delete main.sh and merge funtions into run.sh
> > - selftests: amd-pstate: tbench
> > - - modify ppw to performance per watt for tbench.
> > - - add comments for performance per watt for tbench.
> > - - add comparative test on acpi-cpufreq for tbench.
> > - - calculate drop between amd-pstate and acpi-cpufreq etc.
> > - - plot images about perfrmance,energy and ppw for tbench.
> > - selftests: amd-pstate: gitsource
> > - - modify ppw to performance per watt for gitsource.
> > - - add comments for performance per watt for gitsource.
> > - - add comparative test on acpi-cpufreq for gitsource.
> > - - calculate drop between amd-pstate and acpi-cpufreq etc.
> > - - plot images about perfrmance,energy and ppw for gitsource.
> > - Documentation: amd-pstate:
> > - - modify rst doc, introduce comparative test etc.
> > 
> > Changes from V2->V3:
> > - selftests: amd-pstate:
> > - - reduce print logs for governor.
> > - - add a check to see if tbench and the perf tools are already installed.
> > - - install tbench package from apt or yum.
> > - - correct spelling errors from comprison to comparison.
> > 

The series overall look good for me, only very a few comments. Thanks!

Could we please send V4 to address them?

Thanks,
Ray