From: Leon Romanovsky <leon@kernel.org>
To: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org
Subject: Re: [PATCH xfrm-next v7 6/8] xfrm: speed-up lookup of HW policies
Date: Wed, 23 Nov 2022 14:53:10 +0200 [thread overview]
Message-ID: <Y34Xtqa+F79DCf6S@unreal> (raw)
In-Reply-To: <Y33pk/3rUxFqbH2h@unreal>
On Wed, Nov 23, 2022 at 11:36:19AM +0200, Leon Romanovsky wrote:
> On Wed, Nov 23, 2022 at 09:37:20AM +0100, Steffen Klassert wrote:
> > On Tue, Nov 22, 2022 at 03:57:43PM +0200, Leon Romanovsky wrote:
> > > On Tue, Nov 22, 2022 at 02:10:02PM +0100, Steffen Klassert wrote:
> > > > On Mon, Nov 21, 2022 at 03:01:42PM +0200, Leon Romanovsky wrote:
> > > > > On Mon, Nov 21, 2022 at 01:43:49PM +0100, Steffen Klassert wrote:
> > > > > > On Mon, Nov 21, 2022 at 02:02:52PM +0200, Leon Romanovsky wrote:
> > > > > >
> > > > > > If policy and state do not match here, this means the lookup
> > > > > > returned the wrong state. The correct state might still sit
> > > > > > in the database. At this point, you should either have found
> > > > > > a matching state, or no state at all.
> > > > >
> > > > > I check for "x" because of "x = NULL" above.
> > > >
> > > > This does not change the fact that the lookup returned the wrong state.
> > >
> > > Steffen, but this is exactly why we added this check - to catch wrong
> > > states and configurations.
> >
> > No, you have to adjust the lookup so that this can't happen.
> > This is not a missconfiguration, The lookup found the wrong
> > SA, this is a difference.
> >
> > Use the offload type and dev as a lookup key and don't consider
> > SAs that don't match this in the lookup.
> >
> > This is really not too hard to do. The thing that could be a bit
> > more difficult is that the lookup should be only adjusted when
> > we really have HW policies installed. Otherwise this affects
> > even systems that don't use this kind of offload.
>
> Thanks for an explanation, trying it now.
Something like that?
The code is untested yet.
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 5076f9d7a752..5819023c32ba 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1115,6 +1115,19 @@ xfrm_state_find(const xfrm_address_t *daddr, const xfrm_address_t *saddr,
rcu_read_lock();
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
+ if (IS_ENABLED(CONFIG_XFRM_OFFLOAD) &&
+ pol->xdo.type == XFRM_DEV_OFFLOAD_PACKET) {
+ if (x->xso.type != XFRM_DEV_OFFLOAD_PACKET)
+ /* HW states are in the head of list, there is no need
+ * to iterate further.
+ */
+ break;
+
+ /* Packet offload: both policy and SA should have same device */
+ if (pol->xdo.dev != x->xso.dev)
+ continue;
+ }
+
if (x->props.family == encap_family &&
x->props.reqid == tmpl->reqid &&
(mark & x->mark.m) == x->mark.v &&
@@ -1132,6 +1145,19 @@ xfrm_state_find(const xfrm_address_t *daddr, const xfrm_address_t *saddr,
h_wildcard = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h_wildcard, bydst) {
+ if (IS_ENABLED(CONFIG_XFRM_OFFLOAD) &&
+ pol->xdo.type == XFRM_DEV_OFFLOAD_PACKET) {
+ if (x->xso.type != XFRM_DEV_OFFLOAD_PACKET)
+ /* HW states are in the head of list, there is no need
+ * to iterate further.
+ */
+ break;
+
+ /* Packet offload: both policy and SA should have same device */
+ if (pol->xdo.dev != x->xso.dev)
+ continue;
+ }
+
if (x->props.family == encap_family &&
x->props.reqid == tmpl->reqid &&
(mark & x->mark.m) == x->mark.v &&
@@ -1185,6 +1211,17 @@ xfrm_state_find(const xfrm_address_t *daddr, const xfrm_address_t *saddr,
goto out;
}
+ if (pol->xdo.type == XFRM_DEV_OFFLOAD_PACKET) {
+ memcpy(&x->xso, &pol->xdo, sizeof(x->xso));
+ error = pol->xdo.dev->xfrmdev_ops->xdo_dev_state_add(x);
+ if (error) {
+ x->km.state = XFRM_STATE_DEAD;
+ to_put = x;
+ x = NULL;
+ goto out;
+ }
+ }
+
if (km_query(x, tmpl, pol) == 0) {
spin_lock_bh(&net->xfrm.xfrm_state_lock);
x->km.state = XFRM_STATE_ACQ;
next prev parent reply other threads:[~2022-11-23 13:10 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-09 12:54 [PATCH xfrm-next v7 0/8] Extend XFRM core to allow packet offload configuration Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 1/8] xfrm: add new packet offload flag Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 2/8] xfrm: allow state packet offload mode Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 3/8] xfrm: add an interface to offload policy Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 4/8] xfrm: add TX datapath support for IPsec packet offload mode Leon Romanovsky
2022-11-17 11:59 ` Steffen Klassert
2022-11-17 12:32 ` Leon Romanovsky
2022-11-18 10:23 ` Steffen Klassert
2022-11-21 11:10 ` Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 5/8] xfrm: add RX datapath protection " Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 6/8] xfrm: speed-up lookup of HW policies Leon Romanovsky
2022-11-17 12:12 ` Steffen Klassert
2022-11-17 12:51 ` Leon Romanovsky
2022-11-18 10:49 ` Steffen Klassert
2022-11-20 19:17 ` Leon Romanovsky
2022-11-21 9:44 ` Steffen Klassert
2022-11-21 10:27 ` Leon Romanovsky
2022-11-21 11:09 ` Steffen Klassert
2022-11-21 11:15 ` Leon Romanovsky
2022-11-21 11:25 ` Steffen Klassert
2022-11-21 11:34 ` Leon Romanovsky
2022-11-21 12:02 ` Leon Romanovsky
2022-11-21 12:43 ` Steffen Klassert
2022-11-21 13:01 ` Leon Romanovsky
2022-11-22 13:10 ` Steffen Klassert
2022-11-22 13:57 ` Leon Romanovsky
2022-11-23 8:37 ` Steffen Klassert
2022-11-23 9:36 ` Leon Romanovsky
2022-11-23 12:53 ` Leon Romanovsky [this message]
2022-11-24 11:07 ` Steffen Klassert
2022-11-25 6:23 ` Leon Romanovsky
2022-11-21 12:10 ` Steffen Klassert
2022-11-21 13:21 ` Leon Romanovsky
2022-11-22 4:29 ` Herbert Xu
2022-11-22 6:27 ` Leon Romanovsky
2022-11-22 13:00 ` Steffen Klassert
2022-11-22 13:54 ` Leon Romanovsky
2022-11-23 8:23 ` Steffen Klassert
2022-11-23 10:25 ` Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 7/8] xfrm: add support to HW update soft and hard limits Leon Romanovsky
2022-11-17 12:13 ` Steffen Klassert
2022-11-17 12:32 ` Leon Romanovsky
2022-11-09 12:54 ` [PATCH xfrm-next v7 8/8] xfrm: document IPsec packet offload mode Leon Romanovsky
2022-11-17 12:15 ` Steffen Klassert
2022-11-17 12:33 ` Leon Romanovsky
2022-11-15 18:09 ` [PATCH xfrm-next v7 0/8] Extend XFRM core to allow packet offload configuration Leon Romanovsky
2022-11-15 18:30 ` Steffen Klassert
2022-11-15 19:00 ` Leon Romanovsky
2022-11-16 23:07 ` Saeed Mahameed
2022-11-17 12:20 ` Steffen Klassert
2022-11-17 12:24 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y34Xtqa+F79DCf6S@unreal \
--to=leon@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=herbert@gondor.apana.org.au \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=steffen.klassert@secunet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.