Re: [PATCH v3 4/7] arm64: dts: qcom: sc8280xp: add missing i2c nodes

[Brian Masney <bmasney@redhat.com>]

On Fri, Dec 23, 2022 at 11:37:02AM +0100, Johan Hovold wrote:
> On Tue, Dec 20, 2022 at 02:28:51PM -0500, Brian Masney wrote:
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index f1111cd7f679..a502d4e19d98 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -813,6 +813,38 @@ qup2: geniqup@8c0000 {
> >  
> >  			status = "disabled";
> >  
> > +			i2c16: i2c@880000 {
> > +				compatible = "qcom,geni-i2c";
> > +				reg = <0 0x00880000 0 0x4000>;
> > +				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> > +				clock-names = "se";
> > +				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> 
> I'm aware that the two current i2c nodes has these two properties here
> in the middle, but would you mind moving '#address-cells' and
> '#size-cells' after 'reg' instead where I'd expect them to be?
> 
> Same for the spi patch.
> 
> I can clean up the existing two nodes (and binding example) unless you
> want to do it.

I'll clean up the existing nodes, qcom,i2c-geni-qcom.yaml, and
qcom,geni-se.yaml in my next version.

Brian