Re: [PATCH net-next 5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

[Piergiorgio Beruto <piergiorgio.beruto@gmail.com>]

On Thu, Jan 05, 2023 at 11:05:48AM +0200, Leon Romanovsky wrote:
> On Wed, Jan 04, 2023 at 03:07:05PM +0100, Piergiorgio Beruto wrote:
> > This patch adds support for the onsemi NCN26000 10BASE-T1S industrial
> > Ethernet PHY. The driver supports Point-to-Multipoint operation without
> > auto-negotiation and with link control handling. The PHY also features
> > PLCA for improving performance in P2MP mode.
> > 
> > Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
> > ---
> >  MAINTAINERS                |   7 ++
> >  drivers/net/phy/Kconfig    |   7 ++
> >  drivers/net/phy/Makefile   |   1 +
> >  drivers/net/phy/ncn26000.c | 171 +++++++++++++++++++++++++++++++++++++
> >  4 files changed, 186 insertions(+)
> >  create mode 100644 drivers/net/phy/ncn26000.c
> 
> <...>
> 
> > +static int ncn26000_config_aneg(struct phy_device *phydev)
> > +{
> > +	// Note: the NCN26000 supports only P2MP link mode. Therefore, AN is not
> > +	// supported. However, this function is invoked by phylib to enable the
> > +	// PHY, regardless of the AN support.
> 
> Please use C-style comments for multi lines blocks.
Fixed.
> 
> > +	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
> > +	phydev->mdix = ETH_TP_MDI;
> > +
> > +	// bring up the link
> 
> Thanks