From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 4/9] drm/i915/display/phys: use intel_de_rmw if possible
Date: Fri, 6 Jan 2023 10:26:06 -0500 [thread overview]
Message-ID: <Y7g9jpqG7gpOIovk@intel.com> (raw)
In-Reply-To: <20230105131046.2173431-4-andrzej.hajda@intel.com>
On Thu, Jan 05, 2023 at 02:10:41PM +0100, Andrzej Hajda wrote:
> The helper makes the code more compact and readable.
>
> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
> .../gpu/drm/i915/display/intel_combo_phy.c | 43 +++++-----------
> drivers/gpu/drm/i915/display/intel_dpio_phy.c | 51 ++++++-------------
> 2 files changed, 29 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> index 8b870b2dd4f9d9..27e98eabb0060a 100644
> --- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> @@ -78,14 +78,11 @@ static void icl_set_procmon_ref_values(struct drm_i915_private *dev_priv,
> enum phy phy)
> {
> const struct icl_procmon *procmon;
> - u32 val;
>
> procmon = icl_get_procmon_ref_values(dev_priv, phy);
>
> - val = intel_de_read(dev_priv, ICL_PORT_COMP_DW1(phy));
> - val &= ~((0xff << 16) | 0xff);
> - val |= procmon->dw1;
> - intel_de_write(dev_priv, ICL_PORT_COMP_DW1(phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_COMP_DW1(phy),
> + (0xff << 16) | 0xff, procmon->dw1);
>
> intel_de_write(dev_priv, ICL_PORT_COMP_DW9(phy), procmon->dw9);
> intel_de_write(dev_priv, ICL_PORT_COMP_DW10(phy), procmon->dw10);
> @@ -267,7 +264,6 @@ void intel_combo_phy_power_up_lanes(struct drm_i915_private *dev_priv,
> int lane_count, bool lane_reversal)
> {
> u8 lane_mask;
> - u32 val;
>
> if (is_dsi) {
> drm_WARN_ON(&dev_priv->drm, lane_reversal);
> @@ -308,10 +304,8 @@ void intel_combo_phy_power_up_lanes(struct drm_i915_private *dev_priv,
> }
> }
>
> - val = intel_de_read(dev_priv, ICL_PORT_CL_DW10(phy));
> - val &= ~PWR_DOWN_LN_MASK;
> - val |= lane_mask;
> - intel_de_write(dev_priv, ICL_PORT_CL_DW10(phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_CL_DW10(phy),
> + PWR_DOWN_LN_MASK, lane_mask);
> }
>
> static void icl_combo_phys_init(struct drm_i915_private *dev_priv)
> @@ -366,19 +360,13 @@ static void icl_combo_phys_init(struct drm_i915_private *dev_priv)
>
> icl_set_procmon_ref_values(dev_priv, phy);
>
> - if (phy_is_master(dev_priv, phy)) {
> - val = intel_de_read(dev_priv, ICL_PORT_COMP_DW8(phy));
> - val |= IREFGEN;
> - intel_de_write(dev_priv, ICL_PORT_COMP_DW8(phy), val);
> - }
> -
> - val = intel_de_read(dev_priv, ICL_PORT_COMP_DW0(phy));
> - val |= COMP_INIT;
> - intel_de_write(dev_priv, ICL_PORT_COMP_DW0(phy), val);
> + if (phy_is_master(dev_priv, phy))
> + intel_de_rmw(dev_priv, ICL_PORT_COMP_DW8(phy),
> + 0, IREFGEN);
>
> - val = intel_de_read(dev_priv, ICL_PORT_CL_DW5(phy));
> - val |= CL_POWER_DOWN_ENABLE;
> - intel_de_write(dev_priv, ICL_PORT_CL_DW5(phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_COMP_DW0(phy), 0, COMP_INIT);
> + intel_de_rmw(dev_priv, ICL_PORT_CL_DW5(phy),
> + 0, CL_POWER_DOWN_ENABLE);
> }
> }
>
> @@ -387,8 +375,6 @@ static void icl_combo_phys_uninit(struct drm_i915_private *dev_priv)
> enum phy phy;
>
> for_each_combo_phy_reverse(dev_priv, phy) {
> - u32 val;
> -
> if (phy == PHY_A &&
> !icl_combo_phy_verify_state(dev_priv, phy)) {
> if (IS_TIGERLAKE(dev_priv) || IS_DG1(dev_priv)) {
> @@ -410,14 +396,11 @@ static void icl_combo_phys_uninit(struct drm_i915_private *dev_priv)
> if (!has_phy_misc(dev_priv, phy))
> goto skip_phy_misc;
>
> - val = intel_de_read(dev_priv, ICL_PHY_MISC(phy));
> - val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> - intel_de_write(dev_priv, ICL_PHY_MISC(phy), val);
> + intel_de_rmw(dev_priv, ICL_PHY_MISC(phy), 0,
> + ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN);
>
> skip_phy_misc:
> - val = intel_de_read(dev_priv, ICL_PORT_COMP_DW0(phy));
> - val &= ~COMP_INIT;
> - intel_de_write(dev_priv, ICL_PORT_COMP_DW0(phy), val);
> + intel_de_rmw(dev_priv, ICL_PORT_COMP_DW0(phy), COMP_INIT, 0);
> }
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpio_phy.c b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
> index 7eb7440b31803f..9d825fdaa29055 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpio_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
> @@ -389,9 +389,7 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
> "force reprogramming it\n", phy);
> }
>
> - val = intel_de_read(dev_priv, BXT_P_CR_GT_DISP_PWRON);
> - val |= phy_info->pwron_mask;
> - intel_de_write(dev_priv, BXT_P_CR_GT_DISP_PWRON, val);
> + intel_de_rmw(dev_priv, BXT_P_CR_GT_DISP_PWRON, 0, phy_info->pwron_mask);
>
> /*
> * The PHY registers start out inaccessible and respond to reads with
> @@ -410,27 +408,19 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
> phy);
>
> /* Program PLL Rcomp code offset */
> - val = intel_de_read(dev_priv, BXT_PORT_CL1CM_DW9(phy));
> - val &= ~IREF0RC_OFFSET_MASK;
> - val |= 0xE4 << IREF0RC_OFFSET_SHIFT;
> - intel_de_write(dev_priv, BXT_PORT_CL1CM_DW9(phy), val);
> + intel_de_rmw(dev_priv, BXT_PORT_CL1CM_DW9(phy), IREF0RC_OFFSET_MASK,
> + 0xE4 << IREF0RC_OFFSET_SHIFT);
>
> - val = intel_de_read(dev_priv, BXT_PORT_CL1CM_DW10(phy));
> - val &= ~IREF1RC_OFFSET_MASK;
> - val |= 0xE4 << IREF1RC_OFFSET_SHIFT;
> - intel_de_write(dev_priv, BXT_PORT_CL1CM_DW10(phy), val);
> + intel_de_rmw(dev_priv, BXT_PORT_CL1CM_DW10(phy), IREF1RC_OFFSET_MASK,
> + 0xE4 << IREF1RC_OFFSET_SHIFT);
>
> /* Program power gating */
> - val = intel_de_read(dev_priv, BXT_PORT_CL1CM_DW28(phy));
> - val |= OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN |
> - SUS_CLK_CONFIG;
> - intel_de_write(dev_priv, BXT_PORT_CL1CM_DW28(phy), val);
> -
> - if (phy_info->dual_channel) {
> - val = intel_de_read(dev_priv, BXT_PORT_CL2CM_DW6(phy));
> - val |= DW6_OLDO_DYN_PWR_DOWN_EN;
> - intel_de_write(dev_priv, BXT_PORT_CL2CM_DW6(phy), val);
> - }
> + intel_de_rmw(dev_priv, BXT_PORT_CL1CM_DW28(phy), 0,
> + OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG);
> +
> + if (phy_info->dual_channel)
> + intel_de_rmw(dev_priv, BXT_PORT_CL2CM_DW6(phy), 0,
> + DW6_OLDO_DYN_PWR_DOWN_EN);
>
> if (phy_info->rcomp_phy != -1) {
> u32 grc_code;
> @@ -448,34 +438,25 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
> val << GRC_CODE_SLOW_SHIFT |
> val;
> intel_de_write(dev_priv, BXT_PORT_REF_DW6(phy), grc_code);
> -
> - val = intel_de_read(dev_priv, BXT_PORT_REF_DW8(phy));
> - val |= GRC_DIS | GRC_RDY_OVRD;
> - intel_de_write(dev_priv, BXT_PORT_REF_DW8(phy), val);
> + intel_de_rmw(dev_priv, BXT_PORT_REF_DW8(phy),
> + 0, GRC_DIS | GRC_RDY_OVRD);
> }
>
> if (phy_info->reset_delay)
> udelay(phy_info->reset_delay);
>
> - val = intel_de_read(dev_priv, BXT_PHY_CTL_FAMILY(phy));
> - val |= COMMON_RESET_DIS;
> - intel_de_write(dev_priv, BXT_PHY_CTL_FAMILY(phy), val);
> + intel_de_rmw(dev_priv, BXT_PHY_CTL_FAMILY(phy), 0, COMMON_RESET_DIS);
> }
>
> void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy)
> {
> const struct bxt_ddi_phy_info *phy_info;
> - u32 val;
>
> phy_info = bxt_get_phy_info(dev_priv, phy);
>
> - val = intel_de_read(dev_priv, BXT_PHY_CTL_FAMILY(phy));
> - val &= ~COMMON_RESET_DIS;
> - intel_de_write(dev_priv, BXT_PHY_CTL_FAMILY(phy), val);
> + intel_de_rmw(dev_priv, BXT_PHY_CTL_FAMILY(phy), COMMON_RESET_DIS, 0);
>
> - val = intel_de_read(dev_priv, BXT_P_CR_GT_DISP_PWRON);
> - val &= ~phy_info->pwron_mask;
> - intel_de_write(dev_priv, BXT_P_CR_GT_DISP_PWRON, val);
> + intel_de_rmw(dev_priv, BXT_P_CR_GT_DISP_PWRON, phy_info->pwron_mask, 0);
> }
>
> void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy)
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-01-06 15:26 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 13:10 [Intel-gfx] [PATCH v2 1/9] drm/i915/display/core: use intel_de_rmw if possible Andrzej Hajda
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 2/9] drm/i915/display/power: " Andrzej Hajda
2023-01-05 20:27 ` Rodrigo Vivi
2023-02-16 16:27 ` Jani Nikula
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 3/9] drm/i915/display/dpll: " Andrzej Hajda
2023-01-05 20:32 ` Rodrigo Vivi
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 4/9] drm/i915/display/phys: " Andrzej Hajda
2023-01-06 15:26 ` Rodrigo Vivi [this message]
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 5/9] drm/i915/display/pch: " Andrzej Hajda
2023-01-06 15:28 ` Rodrigo Vivi
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 6/9] drm/i915/display/hdmi: " Andrzej Hajda
2023-01-06 15:35 ` Rodrigo Vivi
2023-01-09 10:51 ` Andrzej Hajda
2023-01-09 11:45 ` Jani Nikula
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 7/9] drm/i915/display/panel: use intel_de_rmw if possible in panel related code Andrzej Hajda
2023-01-09 19:22 ` Rodrigo Vivi
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 8/9] drm/i915/display/interfaces: use intel_de_rmw if possible Andrzej Hajda
2023-01-09 19:24 ` Rodrigo Vivi
2023-01-05 13:10 ` [Intel-gfx] [PATCH v2 9/9] drm/i915/display/misc: " Andrzej Hajda
2023-01-09 19:27 ` Rodrigo Vivi
2023-01-10 9:28 ` Andrzej Hajda
2023-01-10 11:36 ` [Intel-gfx] [PATCH v3] " Andrzej Hajda
2023-01-10 16:15 ` Rodrigo Vivi
2023-01-05 20:21 ` [Intel-gfx] [PATCH v2 1/9] drm/i915/display/core: " Rodrigo Vivi
2023-01-09 11:32 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [v2,1/9] drm/i915/display/core: use intel_de_rmw if possible (rev2) Patchwork
2023-01-09 11:54 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-01-09 13:38 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-01-10 15:45 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [v2,1/9] drm/i915/display/core: use intel_de_rmw if possible (rev3) Patchwork
2023-01-11 12:09 ` Andrzej Hajda
2023-01-11 12:12 ` Veesam, RavitejaX
2023-02-06 12:35 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [v2,1/9] drm/i915/display/core: use intel_de_rmw if possible (rev4) Patchwork
2023-02-06 16:11 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y7g9jpqG7gpOIovk@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=andrzej.hajda@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.