Re: [PATCH v2 3/3] Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets

[Leon Romanovsky <leon@kernel.org>]

On Mon, Jan 30, 2023 at 11:35:04PM +0530, Neeraj Sanjay Kale wrote:
> This adds a driver based on serdev driver for the NXP BT serial
> protocol based on running H:4, which can enable the built-in
> Bluetooth device inside a generic NXP BT chip.
> 
> This driver has Power Save feature that will put the chip into
> sleep state whenever there is no activity for 2000ms, and will
> be woken up when any activity is to be initiated.
> 
> This driver enables the power save feature by default by sending
> the vendor specific commands to the chip during setup.
> 
> During setup, the driver is capable of validating correct chip
> is attached to the host based on the compatibility parameter
> from DT and chip's unique bootloader signature, and download
> firmware.
> 
> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
> ---
> v2: Removed conf file support and added static data for each chip based
> on compatibility devices mentioned in DT bindings. Handled potential
> memory leaks and null pointer dereference issues, simplified FW download
> feature, handled byte-order and few cosmetic changes. (Ilpo Järvinen,
> Alok Tiwari, Hillf Danton)
> ---
>  MAINTAINERS                   |    1 +
>  drivers/bluetooth/Kconfig     |   11 +
>  drivers/bluetooth/Makefile    |    1 +
>  drivers/bluetooth/btnxpuart.c | 1145 +++++++++++++++++++++++++++++++++
>  drivers/bluetooth/btnxpuart.h |  227 +++++++
>  5 files changed, 1385 insertions(+)
>  create mode 100644 drivers/bluetooth/btnxpuart.c
>  create mode 100644 drivers/bluetooth/btnxpuart.h

<...>

> diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
> new file mode 100644
> index 000000000000..6e6bc5a70af2
> --- /dev/null
> +++ b/drivers/bluetooth/btnxpuart.c
> @@ -0,0 +1,1145 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + *
> + *  NXP Bluetooth driver
> + *  Copyright 2018-2023 NXP
> + *
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License, or
> + *  (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.

Please don't add license text, SPDX tag is enough.

<...>

> +	skb = nxp_drv_send_cmd(hdev, HCI_NXP_AUTO_SLEEP_MODE, 1, &pcmd);
> +
> +	if (IS_ERR(skb)) {
> +		bt_dev_err(hdev, "Setting Power Save mode failed (%ld)", PTR_ERR(skb));
> +		return PTR_ERR(skb);
> +	}
> +
> +	status = skb_pull_data(skb, 1);
> +
> +	if (status) {

Please don't add blank lines between function call and error checks of
that function.

> +		if (!*status)
> +			psdata->cur_psmode = psdata->ps_mode;
> +		else
> +			psdata->ps_mode = psdata->cur_psmode;
> +		if (psdata->cur_psmode == PS_MODE_ENABLE)
> +			ps_start_timer(nxpdev);
> +		else
> +			ps_wakeup(nxpdev);
> +		BT_INFO("Power Save mode response: status=%d, ps_mode=%d",
> +			*status, psdata->cur_psmode);
> +	}
> +	kfree_skb(skb);

<...>

> +module_serdev_device_driver(nxp_serdev_driver);
> +
> +MODULE_AUTHOR("Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>");
> +MODULE_DESCRIPTION("NXP Bluetooth Serial driver v1.0 ");
> +MODULE_VERSION("v1.0");

No module versions in new code.

Thanks