From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>
Cc: devel@linuxdriverproject.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] Staging/IIO driver patches for 5.12-rc1
Date: Mon, 15 Feb 2021 17:28:17 +0100 [thread overview]
Message-ID: <YCqhISE0U6/UJoLb@kroah.com> (raw)
The following changes since commit 6ee1d745b7c9fd573fba142a2efdad76a9f1cb04:
Linux 5.11-rc5 (2021-01-24 16:47:14 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git tags/staging-5.12-rc1
for you to fetch changes up to 4eb839aef182fccf8995ee439fc2b48d43e45918:
staging: hikey9xx: Fix alignment of function parameters (2021-02-13 22:37:51 +0100)
----------------------------------------------------------------
Staging/IIO driver patches for 5.12-rc1
Here is the "big" set of staging and IIO driver patches for 5.12-rc1.
Nothing really huge in here, the number of staging tree patches has gone
down for a bit, maybe there's only so much churn to happen in here at
the moment.
The IIO changes are:
- new drivers
- new DT bindings
- new iio driver features
with full details in the shortlog.
The staging driver patches are just a lot of tiny coding style cleanups,
along with some semi-larger hikey driver cleanups as those are _almost_
good enough to get out of the staging tree, but will probably have to
wait until 5.13 to have happen.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Aakash Hemadri (1):
staging: rtl8712: Remove multiple blank lines
Aditya Srivastava (1):
staging: rtl8192e: fix bool comparison in expressions
Alexandre Belloni (6):
dt-bindings: trivial-devices: reorder memsic devices
iio:pressure:ms5637: introduce hardware differentiation
iio:pressure:ms5637: limit available sample frequencies
iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper
iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout
iio:pressure:ms5637: add ms5803 support
Amey Narkhede (2):
staging: qlge/qlge_main: Use min_t instead of min
staging: gdm724x: Fix DMA from stack
Anirudh Rayabharam (3):
staging: wimax/i2400m: fix pointer declaration style
staging: rtl8192u/ieee80211: fix switch case indentation
staging: wimax/i2400m: fix some byte order issues found by sparse
Arnd Bergmann (4):
staging: rtl819x: select CONFIG_CRC32
staging: vchiq: fix uninitialized variable copy
staging: rtl8723bs: remove unused structures
staging: vt665x: fix alignment constraints
Atul Gopinathan (2):
staging: hikey9xx: change spaces to tabs
staging: hikey9xx: make phy_ops struct const
Ayush (2):
staging: rtl8723bs: fix pointer declaration style
staging: wimax: i2400m: fix some incorrect type warnings
Bartosz Golaszewski (3):
iio: adc: xilinx: use helper variable for &pdev->dev
iio: adc: xilinx: use devm_krealloc() instead of kfree() + kcalloc()
iio: adc: xilinx: use more devres helpers and remove remove()
Bernd Harries (2):
staging: comedi: adl_pci7x3x: Add interrupt handling for PCI-7230
staging: comedi: adv_pci_dio: Add interrupt handling for PCI-1730
Borislav Petkov (1):
staging: media: atomisp: Fix size_t format specifier in hmm_alloc() debug statemenet
Brother Matthew De Angelis (1):
Staging: rtl8723bs/core: fix braces coding style issues
Carlis (1):
staging: fbtft: add tearing signal detect
Chen-Yu Tsai (1):
staging: rtl8723bs: wifi_regd.c: Fix incorrect number of regulatory rules
Christian Gromm (2):
staging: most: sound: add sanity check for function argument
staging: most: sound: use non-safe list iteration
Coiby Xu (8):
staging: qlge: use qlge_* prefix to avoid namespace clashes with other qlogic drivers
staging: qlge: Initialize devlink health dump framework
staging: qlge: re-write qlge_init_device
staging: qlge: coredump via devlink health reporter
staging: qlge: support force_coredump option for devlink health dump
staging: qlge: remove mpi_core_to_log which sends coredump to the kernel ring buffer
staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land
staging: qlge: add documentation for debugging qlge
Colin Ian King (2):
staging: net: wimax: i2400m: fw: remove redundant initialization of variable result
staging: qlge: fix read of an uninitialized pointer
Craig Tatlor (1):
fixp-arith: add a linear interpolation function
Cristian Pop (3):
dt-bindings: iio: dac: AD5766 yaml documentation
Documentation/ABI/testing: Add documentation for AD5766 new ABI
iio: dac: ad5766: add driver support for AD5766
DENG Qingfang (1):
staging: mt7621-dts: remove obsolete switch node
Dan Carpenter (1):
staging: vchiq: delete obselete comment
Devajith V S (2):
dt-bindings: iio: accel: kxcjk1013: Document regulator supplies
iio: accel: kxcjk1013: Add rudimentary regulator support
Dinghao Liu (2):
staging: rtl8192u: Add null check in rtl8192_usb_initendpoints
staging: fwserial: Fix error handling in fwserial_create
Dmitry Baryshkov (9):
iio: adc: qcom-vadc: move several adc5 functions to common file
iio: adc: qcom-vadc-common: use fixp_linear_interpolate
iio: adc: move qcom-vadc-common.h to include dir
iio: adc: qcom-spmi-adc5: use of_device_get_match_data
iio: provide of_iio_channel_get_by_name() and devm_ version it
iio: adc: move vadc_map_pt from header to the source file
iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation
iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp
iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb
Dragos Bogdan (1):
iio: adc: ad7476: Add LTC2314-14 support
Dylan Van Assche (1):
staging: vc4_services: bcm2835-audio: Add SNDRV_PCM_INFO_BATCH flag
Fatih Yildirim (1):
staging: nvec: minor coding style fix
Greg Kroah-Hartman (4):
Revert "staging: board: Remove macro board_staging"
Merge 5.11-rc3 into staging-next
Merge tag 'iio-for-5.12a' of https://git.kernel.org/.../jic23/iio into staging-next
Merge 5.11-rc5 into staging-next
Gustavo A. R. Silva (1):
staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie
Hans de Goede (1):
iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
Hemansh Agnihotri (1):
staging: wimax: Fix some coding style problem
Ian Abbott (1):
staging: comedi: adv_pci_dio: Support falling edge triggers
Ilya Lipnitskiy (1):
staging/mt7621-dma: mtk-hsdma.c->hsdma-mt7621.c
Ivan Safonov (4):
staging:rtl8712: remove unused enum WIFI_STATUS_CODE
staging:r8188eu: replace enum WIFI_STATUS_CODE with native kernel definitions
staging:r8188eu: use IEEE80211_FCTL_* kernel definitions
staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user
Jonathan Cameron (3):
dt-bindings:iio:imu:invensense,mpu6050: txt to yaml conversion
dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.
Merge branch 'ib-iio-thermal-5.11-rc1' into togreg
Juerg Haefliger (1):
staging: bcm2835-audio: Replace unsafe strcpy() with strscpy()
Jérôme Pouiller (1):
staging: wfx: fix possible panic with re-queued frames
Kees Cook (1):
staging: Replace lkml.org links with lore
Kumar Kartikeya Dwivedi (15):
staging: qlge/qlge_ethtool.c: Switch from strlcpy to strscpy
staging: comedi: Switch from strlcpy to strscpy
staging: greybus: Switch from strlcpy to strscpy
staging: fsl-dpaa2: Switch from strlcpy to strscpy
staging: most: Switch from strlcpy to strscpy
staging: nvec: Switch from strlcpy to strscpy
staging: octeon: Switch from strlcpy to strscpy
staging: olpc_dcon: Switch from strlcpy to strscpy
staging: rtl8188eu: Switch from strlcpy to strscpy
staging: rtl8192e: Switch from strlcpy to strscpy
staging: rtl8192u: Switch from strlcpy to strscpy
staging: rtl8712: Switch from strlcpy to strscpy
staging: sm750fb: Switch from strlcpy to strscpy
staging: wimax: Switch from strlcpy to strscpy
staging: emxx_udc: Make incorrectly defined global static
Lars-Peter Clausen (7):
dt-bindings:iio:xilinx-xadc: Add Xilinx System Management Wizard binding docs
iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
iio: vl6180: Use DIV_ROUND_CLOSEST() instead of open-coding it
iio: bme680: Use DIV_ROUND_CLOSEST() instead of open-coding it
iio: tsl2583: Use DIV_ROUND_CLOSEST() instead of open-coding it
iio: sc27xx_adc: Use DIV_ROUND_CLOSEST() instead of open-coding it
iio: Handle enumerated properties with gaps
Linus Walleij (3):
iio: accel: yamaha-yas530: Add DT bindings
iio: magnetometer: Add driver for Yamaha YAS530
iio: adc: ab8500-gpadc: Support non-hw-conversion
Mahak Gupta (1):
staging: gasket: fix indentation and lines ending with open parenthesis
Manikantan Ravichandran (1):
staging: greybus: minor code style fix
Martin Kaiser (3):
staging: rtl8188eu: fix rtw_xmit_entry's return value
staging: rtl8723bs: fix rtw_cfg80211_monitor_if_xmit_entry's return value
staging: rtl8188eu: Add Edimax EW-7811UN V2 to device table
Mauro Carvalho Chehab (27):
staging: hikey9xx: phy-hi3670-usb3: use bitfield macros
staging: hikey9xx: phy-hi3670-usb3: adjust retry logic
staging: hikey9xx: phy-hi3670-usb3: hi3670_is_abbclk_seleted() returns bool
staging: hikey9xx: phy-hi3670-usb3.yaml: add a blank line
staging: hikey9xx: hisilicon, hisi-spmi-controller.yaml fix bindings
staging: hikey9xx: hisilicon, hi6421-spmi-pmic.yaml: simplify props
staging: hikey9xx: hi6421v600-regulator: do some cleanups
staging: hikey9xx: hi6421v600-regulator: move LDO config from DT
staging: hikey9xx: hi6421v600-regulator: cleanup debug msgs
staging: hikey9xx: hi6421v600-regulator: get rid of an static data
staging: hikey9xx: hi6421v600-regulator: do some cleanups
staging: hikey9xx: hi6421v600-regulator: update copyright
staging: hikey9xx: hi6421v600-regulator: fix delay logic
staging: hikey9xx: hi6421v600-regulator: cleanup comments
staging: hikey9xx: hi6421v600-regulator: fix get_optimum_mode
staging: hikey9xx: hisilicon, hi6421-spmi-pmic.yaml: cleanup a warning
staging: hikey9xx: hi6421-spmi-pmic: update copyright
staging: hikey9xx: hi6421-spmi-pmic: simplify includes
staging: hikey9xx: spmi driver: convert to regmap
staging: hikey9xx: hi6421v600-regulator: use some regmap helpers
staging: hikey9xx: hi6421-spmi-pmic: rename some vars
staging: hikey9xx: hi6421-spmi-pmic: cleanup probe code
staging: hikey9xx: hi6421-spmi-pmic: cleanup header file
staging: hikey9xx: hi6421-spmi-pmic: fix IRQ handler code
staging: hikey9xx: hi6421-spmi-pmic: cleanup IRQ handling code
staging: hikey9xx: hi6421-spmi-pmic: document registers
staging: hikey9xx: hi6421-spmi-pmic: update copyright notes
Max Leiter (1):
iio:light:apds9960 add detection for MSHW0184 ACPI device in apds9960 driver
Muhammad Usama Anjum (2):
staging: wfx: avoid defining array of flexible struct
staging: wfx: remove unused included header files
Mukul Mehar (1):
staging: hikey9xx: Fix alignment of function parameters
Phil Elwell (3):
staging: vchiq: Fix bulk userdata handling
staging: vchiq: Fix bulk transfers on 64-bit builds
staging: vc04_services: Add a note to the TODO
Phillip Potter (8):
staging: octeon: remove braces from single-line block
staging: rtl8192e: remove braces from single-line block
staging: rtl8192e: replace spaces with tab for a closing if brace
staging: rtl8723bs: fix braces for os_dep/mlme_linux.c
staging: rtl8723bs: remove braces from two single line if blocks
staging: rtl8723bs: fix blank lines and comments in rtl8723b_hal.h
staging: rtl8723bs: remove typedefs from rtl8723b_recv.h
staging: rtl8723bs: remove blank line from include/autoconf.h
Pritthijit Nath (3):
staging: vt6656: Fixed issue with alignment in rf.c
staging: greybus: Fixed alignment issue in hid.c
staging: greybus: Fixed a misspelling in hid.c
Puranjay Mohan (1):
Staging: rtl8192u: use %s and __func__
Rikard Falkeborn (1):
staging: fieldbus: arcx-anybus: constify static structs
Sergio Paracuellos (1):
staging: mt7621-dts: match pinctrl nodes with its binding documentation
Song Chen (3):
staging: board: description for CONFIG_STAGING_BOARD
staging: board: Remove macro board_staging
staging: unisys: visorhba: enhance visorhba to use channel_interrupt
Stephan Gerhold (6):
dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
iio: imu: inv_mpu6050: Add support for MPU-6880
dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
iio: gyro: bmg160: Add rudimentary regulator support
dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
iio: magnetometer: bmc150: Add rudimentary regulator support
Tom Seewald (1):
staging: qlge: Remove duplicate word in comment
Tomas Novotny (1):
dt-bindings:iio:dac:microchip,mcp4725: fix properties for mcp4726
William Durand (1):
staging: rtl8192e: remove multiple blank lines
Xu Wang (3):
iio: frequency: adf4350: Remove redundant null check before clk_disable_unprepare
iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
iio: adc: stm32-dfsdm: Remove redundant null check before clk_disable_unprepare
Ye Xiang (9):
HID: hid-sensor-custom: Add custom sensor iio support
iio: hid-sensors: Add hinge sensor driver
iio:Documentation: Add documentation for hinge sensor channels
iio: hid-sensor-accel-3d: Add timestamp channel for gravity sensor
iio: hid-sensor-gyro-3d: Add timestamp channel
iio: hid-sensor-als: Add timestamp channel
iio: hid-sensor-magn-3d: Add timestamp channel
iio: hid-sensor-incl-3d: Add timestamp channel
iio: hid-sensor-rotation: Add timestamp channel
Yujia Qiao (1):
Staging: vt6655: Replace a camel case variable name
Zhaoyang Huang (1):
driver: staging: count ashmem_range into SLAB_RECLAIMBLE
Zheng Yongjun (4):
staging: most: net: use DEFINE_MUTEX() for mutex lock
staging: vc04_services: use DEFINE_MUTEX() for mutex lock
staging: greybus: light: Use kzalloc for allocating only one thing
iio: chemical: pms7003: convert comma to semicolon
karthik alapati (2):
staging: rtl8723bs: fix function comments to follow kernel-doc
staging: rtl8723bs: remove obsolete commented out code
Documentation/ABI/testing/sysfs-bus-iio | 11 +
Documentation/ABI/testing/sysfs-bus-iio-dac-ad5766 | 31 +
.../bindings/iio/accel/kionix,kxcjk1013.yaml | 3 +
.../devicetree/bindings/iio/adc/xilinx-xadc.txt | 49 +-
.../devicetree/bindings/iio/dac/adi,ad5766.yaml | 63 +
.../bindings/iio/dac/microchip,mcp4725.yaml | 31 +-
.../bindings/iio/gyroscope/bosch,bmg160.yaml | 3 +
.../bindings/iio/gyroscope/invensense,mpu3050.txt | 45 -
.../bindings/iio/gyroscope/invensense,mpu3050.yaml | 70 +
.../devicetree/bindings/iio/imu/inv_mpu6050.txt | 67 -
.../bindings/iio/imu/invensense,mpu6050.yaml | 104 ++
.../iio/magnetometer/bosch,bmc150_magn.yaml | 3 +
.../bindings/iio/magnetometer/yamaha,yas530.yaml | 112 ++
.../devicetree/bindings/trivial-devices.yaml | 10 +-
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
Documentation/networking/device_drivers/index.rst | 1 +
.../networking/device_drivers/qlogic/index.rst | 18 +
.../networking/device_drivers/qlogic/qlge.rst | 118 ++
MAINTAINERS | 6 +
drivers/hid/hid-sensor-custom.c | 143 ++
drivers/iio/accel/hid-sensor-accel-3d.c | 6 +-
drivers/iio/accel/kxcjk-1013.c | 32 +
drivers/iio/adc/Kconfig | 11 +-
drivers/iio/adc/ab8500-gpadc.c | 30 +-
drivers/iio/adc/ad7476.c | 6 +
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 3 +-
drivers/iio/adc/qcom-spmi-adc5.c | 95 +-
drivers/iio/adc/qcom-spmi-vadc.c | 3 +-
drivers/iio/adc/qcom-vadc-common.c | 229 +--
drivers/iio/adc/sc27xx_adc.c | 2 +-
drivers/iio/adc/stm32-adc-core.c | 29 +-
drivers/iio/adc/stm32-adc.c | 14 +-
drivers/iio/adc/stm32-dfsdm-core.c | 3 +-
drivers/iio/adc/xilinx-xadc-core.c | 364 +++--
drivers/iio/adc/xilinx-xadc-events.c | 9 +-
drivers/iio/adc/xilinx-xadc.h | 6 +
drivers/iio/chemical/bme680_core.c | 2 +-
drivers/iio/chemical/pms7003.c | 2 +-
.../iio/common/hid-sensors/hid-sensor-attributes.c | 2 +
drivers/iio/common/ms_sensors/ms_sensors_i2c.c | 76 +-
drivers/iio/common/ms_sensors/ms_sensors_i2c.h | 15 +-
drivers/iio/dac/Kconfig | 10 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ad5766.c | 643 ++++++++
drivers/iio/frequency/adf4350.c | 6 +-
drivers/iio/gyro/bmg160_core.c | 25 +
drivers/iio/gyro/hid-sensor-gyro-3d.c | 40 +-
drivers/iio/imu/inv_mpu6050/Kconfig | 8 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 +
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 +
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 5 +
drivers/iio/industrialio-core.c | 44 +-
drivers/iio/inkern.c | 34 +-
drivers/iio/light/apds9960.c | 8 +
drivers/iio/light/hid-sensor-als.c | 39 +-
drivers/iio/light/tsl2583.c | 8 +-
drivers/iio/light/vl6180.c | 2 +-
drivers/iio/magnetometer/Kconfig | 15 +
drivers/iio/magnetometer/Makefile | 2 +
drivers/iio/magnetometer/bmc150_magn.c | 26 +-
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 48 +-
drivers/iio/magnetometer/yamaha-yas530.c | 1049 +++++++++++++
drivers/iio/orientation/hid-sensor-incl-3d.c | 43 +-
drivers/iio/orientation/hid-sensor-rotation.c | 46 +-
drivers/iio/position/Kconfig | 16 +
drivers/iio/position/Makefile | 1 +
.../iio/position/hid-sensor-custom-intel-hinge.c | 385 +++++
drivers/iio/pressure/ms5637.c | 77 +-
drivers/staging/android/ashmem.c | 2 +-
drivers/staging/board/Kconfig | 9 +-
drivers/staging/clocking-wizard/TODO | 3 +-
drivers/staging/comedi/comedi_fops.c | 4 +-
drivers/staging/comedi/drivers/adl_pci7x3x.c | 284 +++-
drivers/staging/comedi/drivers/adv_pci_dio.c | 289 +++-
drivers/staging/emxx_udc/emxx_udc.c | 3 +
drivers/staging/emxx_udc/emxx_udc.h | 2 -
drivers/staging/fbtft/fb_st7789v.c | 115 ++
drivers/staging/fieldbus/anybuss/arcx-anybus.c | 4 +-
drivers/staging/fsl-dpaa2/ethsw/ethsw-ethtool.c | 6 +-
drivers/staging/fwserial/fwserial.c | 2 +
drivers/staging/gasket/gasket_ioctl.c | 42 +-
drivers/staging/gdm724x/gdm_usb.c | 10 +-
drivers/staging/greybus/audio_helper.c | 2 +-
drivers/staging/greybus/audio_manager_sysfs.c | 4 +-
drivers/staging/greybus/audio_module.c | 2 +-
drivers/staging/greybus/audio_topology.c | 6 +-
drivers/staging/greybus/hid.c | 6 +-
drivers/staging/greybus/light.c | 3 +-
drivers/staging/greybus/power_supply.c | 2 +-
drivers/staging/greybus/spilib.c | 4 +-
drivers/staging/hikey9xx/Kconfig | 2 +
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 331 ++--
drivers/staging/hikey9xx/hi6421v600-regulator.c | 533 +++----
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 108 +-
.../hikey9xx/hisilicon,hisi-spmi-controller.yaml | 19 +-
drivers/staging/hikey9xx/phy-hi3670-usb3.c | 81 +-
drivers/staging/hikey9xx/phy-hi3670-usb3.yaml | 1 +
drivers/staging/media/atomisp/pci/hmm/hmm.c | 2 +-
drivers/staging/most/net/net.c | 3 +-
drivers/staging/most/sound/sound.c | 8 +-
drivers/staging/most/video/video.c | 6 +-
drivers/staging/mt7621-dma/Makefile | 2 +-
.../mt7621-dma/{mtk-hsdma.c => hsdma-mt7621.c} | 2 +-
drivers/staging/mt7621-dts/mt7621.dtsi | 58 +-
drivers/staging/nvec/nvec_power.c | 2 +-
drivers/staging/nvec/nvec_ps2.c | 4 +-
drivers/staging/octeon/ethernet-mdio.c | 9 +-
drivers/staging/olpc_dcon/olpc_dcon.c | 2 +-
drivers/staging/qlge/Kconfig | 1 +
drivers/staging/qlge/Makefile | 2 +-
drivers/staging/qlge/TODO | 10 -
drivers/staging/qlge/qlge.h | 244 +--
drivers/staging/qlge/qlge_dbg.c | 1650 ++++++--------------
drivers/staging/qlge/qlge_devlink.c | 163 ++
drivers/staging/qlge/qlge_devlink.h | 9 +
drivers/staging/qlge/qlge_ethtool.c | 239 ++-
drivers/staging/qlge/qlge_main.c | 1380 ++++++++--------
drivers/staging/qlge/qlge_mpi.c | 356 +++--
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c | 44 +-
drivers/staging/rtl8188eu/include/wifi.h | 65 +-
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c | 2 +-
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
drivers/staging/rtl8188eu/os_dep/xmit_linux.c | 2 +-
drivers/staging/rtl8192e/Kconfig | 1 +
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 4 +-
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 4 +-
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 4 +-
drivers/staging/rtl8192e/rtl8192e/rtl_ethtool.c | 6 +-
drivers/staging/rtl8192e/rtl8192e/rtl_ps.c | 2 +-
drivers/staging/rtl8192e/rtllib_rx.c | 5 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 3 +-
drivers/staging/rtl8192e/rtllib_tx.c | 8 +-
drivers/staging/rtl8192e/rtllib_wx.c | 2 -
drivers/staging/rtl8192u/Kconfig | 1 +
.../rtl8192u/ieee80211/ieee80211_softmac_wx.c | 2 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 28 +-
drivers/staging/rtl8192u/r8190_rtl8256.c | 2 +-
drivers/staging/rtl8192u/r8192U_core.c | 2 +
drivers/staging/rtl8712/rtl871x_debug.h | 2 -
drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 2 +-
drivers/staging/rtl8712/wifi.h | 14 -
drivers/staging/rtl8723bs/core/rtw_security.c | 24 +-
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 225 +--
drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c | 2 +-
drivers/staging/rtl8723bs/include/autoconf.h | 1 -
drivers/staging/rtl8723bs/include/hal_intf.h | 8 +-
drivers/staging/rtl8723bs/include/ieee80211.h | 79 -
drivers/staging/rtl8723bs/include/rtl8723b_hal.h | 13 +-
drivers/staging/rtl8723bs/include/rtl8723b_recv.h | 8 +-
drivers/staging/rtl8723bs/include/rtw_mlme.h | 6 +-
drivers/staging/rtl8723bs/include/wlan_bssdef.h | 2 +-
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 2 +-
drivers/staging/rtl8723bs/os_dep/mlme_linux.c | 6 +-
drivers/staging/rtl8723bs/os_dep/wifi_regd.c | 2 +-
drivers/staging/sm750fb/sm750.c | 2 +-
drivers/staging/unisys/visorhba/visorhba_main.c | 90 +-
drivers/staging/vc04_services/bcm2835-audio/TODO | 2 +-
.../vc04_services/bcm2835-audio/bcm2835-ctl.c | 6 +-
.../vc04_services/bcm2835-audio/bcm2835-pcm.c | 6 +-
.../staging/vc04_services/bcm2835-audio/bcm2835.c | 6 +-
drivers/staging/vc04_services/interface/TODO | 4 +
.../vc04_services/interface/vchiq_arm/vchiq_arm.c | 22 +-
.../interface/vchiq_arm/vchiq_connected.c | 3 +-
drivers/staging/vt6655/baseband.c | 4 +-
drivers/staging/vt6655/rxtx.h | 8 +-
drivers/staging/vt6656/rf.c | 2 +-
drivers/staging/vt6656/rxtx.h | 6 +-
drivers/staging/wfx/bh.c | 1 -
drivers/staging/wfx/bh.h | 4 -
drivers/staging/wfx/bus.h | 3 -
drivers/staging/wfx/bus_sdio.c | 6 -
drivers/staging/wfx/bus_spi.c | 7 -
drivers/staging/wfx/data_rx.c | 5 -
drivers/staging/wfx/data_tx.c | 15 +-
drivers/staging/wfx/data_tx.h | 4 +-
drivers/staging/wfx/debug.c | 6 -
drivers/staging/wfx/fwio.c | 2 -
drivers/staging/wfx/hif_api_cmd.h | 6 +-
drivers/staging/wfx/hif_api_general.h | 9 -
drivers/staging/wfx/hif_tx.c | 4 -
drivers/staging/wfx/hif_tx_mib.c | 5 -
drivers/staging/wfx/hwio.c | 3 -
drivers/staging/wfx/hwio.h | 2 -
drivers/staging/wfx/key.c | 2 -
drivers/staging/wfx/key.h | 2 -
drivers/staging/wfx/main.c | 7 -
drivers/staging/wfx/main.h | 3 -
drivers/staging/wfx/queue.c | 4 -
drivers/staging/wfx/queue.h | 3 -
drivers/staging/wfx/scan.h | 2 -
drivers/staging/wfx/sta.c | 6 -
drivers/staging/wfx/sta.h | 2 -
drivers/staging/wfx/traces.h | 3 -
drivers/staging/wfx/wfx.h | 3 -
drivers/staging/wimax/i2400m/fw.c | 17 +-
drivers/staging/wimax/i2400m/netdev.c | 6 +-
drivers/staging/wimax/i2400m/rx.c | 7 +-
drivers/staging/wimax/i2400m/tx.c | 8 +-
drivers/staging/wimax/i2400m/usb.c | 4 +-
drivers/staging/wlan-ng/p80211netdev.c | 28 +-
include/linux/fixp-arith.h | 19 +
include/linux/hid-sensor-ids.h | 14 +
.../linux}/iio/adc/qcom-vadc-common.h | 28 +-
include/linux/iio/consumer.h | 36 +
include/linux/mfd/hi6421-spmi-pmic.h | 29 +-
206 files changed, 7079 insertions(+), 4438 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dac-ad5766
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
create mode 100644 Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
create mode 100644 Documentation/networking/device_drivers/qlogic/index.rst
create mode 100644 Documentation/networking/device_drivers/qlogic/qlge.rst
create mode 100644 drivers/iio/dac/ad5766.c
create mode 100644 drivers/iio/magnetometer/yamaha-yas530.c
create mode 100644 drivers/iio/position/hid-sensor-custom-intel-hinge.c
rename drivers/staging/mt7621-dma/{mtk-hsdma.c => hsdma-mt7621.c} (99%)
create mode 100644 drivers/staging/qlge/qlge_devlink.c
create mode 100644 drivers/staging/qlge/qlge_devlink.h
rename {drivers => include/linux}/iio/adc/qcom-vadc-common.h (92%)
next reply other threads:[~2021-02-15 17:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-15 16:28 Greg KH [this message]
2021-02-21 5:40 ` [GIT PULL] Staging/IIO driver patches for 5.12-rc1 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YCqhISE0U6/UJoLb@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=devel@linuxdriverproject.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.