Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Tue 16 Feb 15:14 CST 2021, Dmitry Baryshkov wrote:

> Except for the compatible value changes:
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> May I suggest to split the compatibility name changes into a separate
> series from this patch (without it the patch stands a chance of being
> accepted into the stable tree, if I'm not mistaken).
> 

Please let me know what I should do with this patch.

Regards,
Bjorn

> On Mon, 15 Feb 2021 at 19:27, Jonathan Marek <jonathan@marek.ca> wrote:
> >
> > Apply these fixes to the newly added sm8250 display ndoes
> >  - Use sm8250 compatibles instead of sdm845 compatibles
> >  - Remove "notused" interconnect (which apparently was blindly copied from
> >    my old patches)
> >  - Use dispcc node example from dt-bindings, removing clocks which aren't
> >    documented or used by the driver and fixing the region size.
> >
> > Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
> >  1 file changed, 8 insertions(+), 23 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index 947e1accae3a..693ac533f9b6 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
> >                 };
> >
> >                 mdss: mdss@ae00000 {
> > -                       compatible = "qcom,sdm845-mdss";
> > +                       compatible = "qcom,sm8250-mdss";
> >                         reg = <0 0x0ae00000 0 0x1000>;
> >                         reg-names = "mdss";
> >
> > -                       interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
> > -                                       <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > +                       interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> >                                         <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> > -                       interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
> > +                       interconnect-names = "mdp0-mem", "mdp1-mem";
> >
> >                         power-domains = <&dispcc MDSS_GDSC>;
> >
> > @@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
> >                         ranges;
> >
> >                         mdss_mdp: mdp@ae01000 {
> > -                               compatible = "qcom,sdm845-dpu";
> > +                               compatible = "qcom,sm8250-dpu";
> >                                 reg = <0 0x0ae01000 0 0x8f000>,
> >                                       <0 0x0aeb0000 0 0x2008>;
> >                                 reg-names = "mdp", "vbif";
> > @@ -2580,7 +2579,7 @@ opp-358000000 {
> >
> >                 dispcc: clock-controller@af00000 {
> >                         compatible = "qcom,sm8250-dispcc";
> > -                       reg = <0 0x0af00000 0 0x20000>;
> > +                       reg = <0 0x0af00000 0 0x10000>;
> >                         mmcx-supply = <&mmcx_reg>;
> >                         clocks = <&rpmhcc RPMH_CXO_CLK>,
> >                                  <&dsi0_phy 0>,
> > @@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
> >                                  <&dsi1_phy 0>,
> >                                  <&dsi1_phy 1>,
> >                                  <0>,
> > -                                <0>,
> > -                                <0>,
> > -                                <0>,
> > -                                <0>,
> > -                                <0>,
> > -                                <0>,
> > -                                <0>,
> > -                                <&sleep_clk>;
> > +                                <0>;
> >                         clock-names = "bi_tcxo",
> >                                       "dsi0_phy_pll_out_byteclk",
> >                                       "dsi0_phy_pll_out_dsiclk",
> >                                       "dsi1_phy_pll_out_byteclk",
> >                                       "dsi1_phy_pll_out_dsiclk",
> > -                                     "dp_link_clk_divsel_ten",
> > -                                     "dp_vco_divided_clk_src_mux",
> > -                                     "dptx1_phy_pll_link_clk",
> > -                                     "dptx1_phy_pll_vco_div_clk",
> > -                                     "dptx2_phy_pll_link_clk",
> > -                                     "dptx2_phy_pll_vco_div_clk",
> > -                                     "edp_phy_pll_link_clk",
> > -                                     "edp_phy_pll_vco_div_clk",
> > -                                     "sleep_clk";
> > +                                     "dp_phy_pll_link_clk",
> > +                                     "dp_phy_pll_vco_div_clk";
> >                         #clock-cells = <1>;
> >                         #reset-cells = <1>;
> >                         #power-domain-cells = <1>;
> > --
> > 2.26.1
> >
> 
> 
> -- 
> With best wishes
> Dmitry