From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Belisko Marek <marek.belisko@gmail.com>
Cc: netdev <netdev@vger.kernel.org>,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
mripard@kernel.org, wens@csie.org, jernej.skrabec@siol.net
Subject: Re: set mtu size broken for dwmac-sun8i
Date: Wed, 17 Mar 2021 17:01:56 +0100 [thread overview]
Message-ID: <YFIn9CRmZGrTILXI@Red> (raw)
In-Reply-To: <CAAfyv37JbPtV3uUzc0ZUHNMCh+_y1XOH-auGWYJSzy4id07VCw@mail.gmail.com>
Le Wed, Mar 17, 2021 at 12:37:48PM +0100, Belisko Marek a écrit :
> On Wed, Mar 17, 2021 at 12:33 PM Corentin Labbe
> <clabbe.montjoie@gmail.com> wrote:
> >
> > Le Wed, Mar 17, 2021 at 10:19:26AM +0100, Belisko Marek a écrit :
> > > Hi,
> > >
> > > I'm hunting an issue when setting mtu failed for dwmac-sun8i driver.
> > > Basically adding more debug shows that in stmmac_change_mtu
> > > tx_fifo_size is 0 and in this case EINVAL is reported. Isaw there was
> > > fix for similar driver dwmac-sunxi driver by:
> > > 806fd188ce2a4f8b587e83e73c478e6484fbfa55
> > >
> > > IIRC dwmac-sun8i should get tx and rx fifo size from dma but seems
> > > it's not the case. I'm using 5.4 kernel LTS release. Any ideas?
> > >
> > > Thanks and BR,
> > >
> > > marek
> > >
> >
> > Hello
> >
> > Could you provide exact command line you tried to change mtu ?
> > Along with all MTU values you tried.
> I tried with ifconfig eth0 down && ifconfig eth0 mtu 1400 return:
> ifconfig: SIOCSIFMTU: Invalid argument
>
> btw board is orange-pi-pc-plus
> >
> > Thanks
> > Regards
>
I have added as CC sunxi maintainers
I can confirm that dwmac-sun8i need the same fix as 806fd188ce2a4f8b587e83e73c478e6484fbfa55.
With the patch below, I successfully changed MTU ... and the network is still working.
My first test was on orange-pi-pc which is the same SoC than your board.
I test this patch on all other sunxi SoCs and I send it upstream after.
@netdev, does there is some specific MTU values interesting to test ? (I curently try 68 500 1000 1200 1400 1500 1600 9000)
Regards
Author: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: Wed Mar 17 16:49:50 2021 +0100
net: stmmac: dwmac-sun8i: Provide TX and RX fifo sizes
MTU cannot be changed on dwmac-sun8i.
This is due to tx_fifo_size being 0.
Like dwmac-sunxi (with 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes"))
dwmac-sun8i need to have tx and rx fifo sizes set.
Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i")
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 6b75cf2603ff..e62efd166ec8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1214,6 +1214,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
plat_dat->init = sun8i_dwmac_init;
plat_dat->exit = sun8i_dwmac_exit;
plat_dat->setup = sun8i_dwmac_setup;
+ plat_dat->tx_fifo_size = 4096;
+ plat_dat->rx_fifo_size = 16384;
ret = sun8i_dwmac_set_syscon(&pdev->dev, plat_dat);
if (ret)
prev parent reply other threads:[~2021-03-17 16:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-17 9:19 set mtu size broken for dwmac-sun8i Belisko Marek
2021-03-17 11:33 ` Corentin Labbe
2021-03-17 11:37 ` Belisko Marek
2021-03-17 16:01 ` Corentin Labbe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YFIn9CRmZGrTILXI@Red \
--to=clabbe.montjoie@gmail.com \
--cc=jernej.skrabec@siol.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=marek.belisko@gmail.com \
--cc=mripard@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.