From: Minchan Kim <minchan@kernel.org>
To: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-mm <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>,
gregkh@linuxfoundation.org, surenb@google.com,
joaodias@google.com, willy@infradead.org, digetx@gmail.com
Subject: Re: [PATCH v6] mm: cma: support sysfs
Date: Tue, 23 Mar 2021 23:57:25 -0700 [thread overview]
Message-ID: <YFri1Qn1YorOPvsM@google.com> (raw)
In-Reply-To: <71b7914d-d9ff-2200-d6c9-6eab28499887@nvidia.com>
On Tue, Mar 23, 2021 at 11:26:08PM -0700, John Hubbard wrote:
> On 3/23/21 10:44 PM, Minchan Kim wrote:
> > On Tue, Mar 23, 2021 at 09:47:27PM -0700, John Hubbard wrote:
> > > On 3/23/21 8:27 PM, Minchan Kim wrote:
> > > ...
> > > > > > +static int __init cma_sysfs_init(void)
> > > > > > +{
> > > > > > + unsigned int i;
> > > > > > +
> > > > > > + cma_kobj_root = kobject_create_and_add("cma", mm_kobj);
> > > > > > + if (!cma_kobj_root)
> > > > > > + return -ENOMEM;
> > > > > > +
> > > > > > + for (i = 0; i < cma_area_count; i++) {
> > > > > > + int err;
> > > > > > + struct cma *cma;
> > > > > > + struct cma_kobject *cma_kobj;
> > > > > > +
> > > > > > + cma_kobj = kzalloc(sizeof(*cma_kobj), GFP_KERNEL);
> > > > > > + if (!cma_kobj) {
> > > > > > + kobject_put(cma_kobj_root);
> > > > > > + return -ENOMEM;
> > > > >
> > > > > This leaks little cma_kobj's all over the floor. :)
> > > >
> > > > I thought kobject_put(cma_kobj_root) should deal with it. No?
> > > >
> > > If this fails when i > 0, there will be cma_kobj instances that
> > > were stashed in the cma_areas[] array. But this code only deletes
> > > the most recently allocated cma_kobj, not anything allocated on
> > > previous iterations of the loop.
> >
> > Oh, I misunderstood that destroying of root kobject will release
> > children recursively. Seems not true. Go back to old version.
> >
> >
> > index 16c81c9cb9b7..418951a3f138 100644
> > --- a/mm/cma_sysfs.c
> > +++ b/mm/cma_sysfs.c
> > @@ -80,20 +80,19 @@ static struct kobj_type cma_ktype = {
> > static int __init cma_sysfs_init(void)
> > {
> > unsigned int i;
> > + int err;
> > + struct cma *cma;
> > + struct cma_kobject *cma_kobj;
> >
> > cma_kobj_root = kobject_create_and_add("cma", mm_kobj);
> > if (!cma_kobj_root)
> > return -ENOMEM;
> >
> > for (i = 0; i < cma_area_count; i++) {
> > - int err;
> > - struct cma *cma;
> > - struct cma_kobject *cma_kobj;
> > -
> > cma_kobj = kzalloc(sizeof(*cma_kobj), GFP_KERNEL);
> > if (!cma_kobj) {
> > - kobject_put(cma_kobj_root);
> > - return -ENOMEM;
> > + err = -ENOMEM;
> > + goto out;
> > }
> >
> > cma = &cma_areas[i];
> > @@ -103,11 +102,21 @@ static int __init cma_sysfs_init(void)
> > cma_kobj_root, "%s", cma->name);
> > if (err) {
> > kobject_put(&cma_kobj->kobj);
> > - kobject_put(cma_kobj_root);
> > - return err;
> > + goto out;
> > }
> > }
> >
> > return 0;
> > +out:
> > + while (--i >= 0) {
> > + cma = &cma_areas[i];
> > +
> > + kobject_put(&cma->kobj->kobj);
>
>
> OK. As long as you are spinning a new version, let's fix up the naming to
> be a little better, too. In this case, with a mildly dizzying mix of cma's
> and kobjects, it actually makes a real difference. I wouldn't have asked,
> but the above cma->kobj->kobj chain really made it obvious for me just now.
>
> So instead of this (in cma.h):
>
> struct cma_kobject {
> struct cma *cma;
> struct kobject kobj;
> };
>
> struct cma {
> ...
> struct cma_kobject *kobj;
> };
>
> , how about approximately this:
>
> struct cma_kobject_wrapper {
> struct cma *parent;
> struct kobject kobj;
> };
>
> struct cma {
> ...
> struct cma_kobject_wrapper *cma_kobj_wrapper;
> };
>
>
> ...thus allowing readers of cma_sysfs.c to read that file more easily.
I agree cma->kobj->kobj is awkward but personally, I don't like the
naming: cma_kobject_wrapper parent pointer. cma_kobject is alredy
wrapper so it sounds me redundant and it's not a parent in same
hierarchy.
Since the kobj->kobj is just one line in the code(I don't imagine
it could grow up in cma_sysfs in future), I don't think it would
be a problem. If we really want to make it more clear, maybe?
cma->cma_kobj->kobj
It would be consistent with other variables in cma_sysfs_init.
next prev parent reply other threads:[~2021-03-24 6:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-24 1:05 [PATCH v6] mm: cma: support sysfs Minchan Kim
2021-03-24 2:34 ` John Hubbard
2021-03-24 3:27 ` Minchan Kim
2021-03-24 4:47 ` John Hubbard
2021-03-24 5:44 ` Minchan Kim
2021-03-24 6:26 ` John Hubbard
2021-03-24 6:57 ` Minchan Kim [this message]
2021-03-24 7:10 ` John Hubbard
2021-03-24 12:37 ` Dmitry Osipenko
2021-03-24 15:18 ` Minchan Kim
2021-03-24 12:33 ` Dmitry Osipenko
2021-03-24 15:12 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YFri1Qn1YorOPvsM@google.com \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=digetx@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jhubbard@nvidia.com \
--cc=joaodias@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=surenb@google.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.