Re: [RFC PATCH 1/3] tests/docker: gcc-10 based images for ppc64{, le} tests

[David Gibson <david@gibson.dropbear.id.au>]

[-- Attachment #1: Type: text/plain, Size: 5762 bytes --]

On Thu, Apr 15, 2021 at 06:41:36PM -0300, matheus.ferst@eldorado.org.br wrote:
> From: Matheus Ferst <matheus.ferst@eldorado.org.br>
> 
> A newer compiler is needed to build tests for Power10 instructions. As
> done for arm64 on c729a99d2701, new '-test-cross' images are created for
> ppc64 and ppc64le. As done on 936fda4d771f, a test for compiler support
> is added to verify that the toolchain in use has '-mpower10'.
> 
> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
> ---
>  tests/docker/Makefile.include                   |  4 ++++
>  .../dockerfiles/debian-ppc64-test-cross.docker  | 13 +++++++++++++
>  .../debian-ppc64el-test-cross.docker            | 17 +++++++++++++++++
>  tests/tcg/configure.sh                          | 12 ++++++++----
>  4 files changed, 42 insertions(+), 4 deletions(-)
>  create mode 100644 tests/docker/dockerfiles/debian-ppc64-test-cross.docker
>  create mode 100644 tests/docker/dockerfiles/debian-ppc64el-test-cross.docker
> 
> diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
> index 9f464cb92c..1f8941d290 100644
> --- a/tests/docker/Makefile.include
> +++ b/tests/docker/Makefile.include
> @@ -152,10 +152,14 @@ docker-image-debian-sparc64-cross: docker-image-debian10
>  docker-image-debian-tricore-cross: docker-image-debian10
>  docker-image-debian-all-test-cross: docker-image-debian10
>  docker-image-debian-arm64-test-cross: docker-image-debian11
> +docker-image-debian-ppc64-test-cross: docker-image-debian11
> +docker-image-debian-ppc64el-test-cross: docker-image-debian11
>  
>  # These images may be good enough for building tests but not for test builds
>  DOCKER_PARTIAL_IMAGES += debian-alpha-cross
>  DOCKER_PARTIAL_IMAGES += debian-arm64-test-cross
> +DOCKER_PARTIAL_IMAGES += debian-ppc64-test-cross
> +DOCKER_PARTIAL_IMAGES += debian-ppc64el-test-cross
>  DOCKER_PARTIAL_IMAGES += debian-hppa-cross
>  DOCKER_PARTIAL_IMAGES += debian-m68k-cross debian-mips64-cross
>  DOCKER_PARTIAL_IMAGES += debian-powerpc-cross debian-ppc64-cross

Why are you adding new images, rather than updating the existing
debian-powerpc-cross image?  I don't think you should need separate
ppc64 and ppc64el images, a single image with a gcc that can target
both should suffice.  (Also, it's typically ppc64le, not ppc64el,
which, yes, is different from what the mips and arm people do for no
particularly good reason).

> diff --git a/tests/docker/dockerfiles/debian-ppc64-test-cross.docker b/tests/docker/dockerfiles/debian-ppc64-test-cross.docker
> new file mode 100644
> index 0000000000..66abfdeb47
> --- /dev/null
> +++ b/tests/docker/dockerfiles/debian-ppc64-test-cross.docker
> @@ -0,0 +1,13 @@
> +#
> +# Docker ppc64 cross-compiler target (tests only)
> +#
> +# This docker target builds on the debian Bullseye base image.
> +#
> +FROM qemu/debian11
> +
> +# Add the foreign architecture we want and install dependencies
> +RUN dpkg --add-architecture ppc64
> +RUN apt update && \
> +    DEBIAN_FRONTEND=noninteractive eatmydata \
> +        apt install -y --no-install-recommends \
> +        libc6-dev-ppc64-cross gcc-10-powerpc64-linux-gnu
> diff --git a/tests/docker/dockerfiles/debian-ppc64el-test-cross.docker b/tests/docker/dockerfiles/debian-ppc64el-test-cross.docker
> new file mode 100644
> index 0000000000..7582508467
> --- /dev/null
> +++ b/tests/docker/dockerfiles/debian-ppc64el-test-cross.docker
> @@ -0,0 +1,17 @@
> +#
> +# Docker ppc64el cross-compiler target (tests only)
> +#
> +# This docker target builds on the debian Bullseye base image.
> +#
> +FROM qemu/debian11
> +
> +# Add the foreign architecture we want and install dependencies
> +RUN dpkg --add-architecture ppc64el
> +RUN apt update && \
> +    DEBIAN_FRONTEND=noninteractive eatmydata \
> +        apt install -y --no-install-recommends \
> +        crossbuild-essential-ppc64el gcc-10-powerpc64le-linux-gnu
> +
> +# Specify the cross prefix for this image (see tests/docker/common.rc)
> +#ENV QEMU_CONFIGURE_OPTS --cross-prefix=powerpc64le-linux-gnu-
> +#ENV DEF_TARGET_LIST ppc64-softmmu,ppc64-linux-user,ppc64abi32-linux-user
> diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
> index fa1a4261a4..5f5db91a01 100755
> --- a/tests/tcg/configure.sh
> +++ b/tests/tcg/configure.sh
> @@ -170,13 +170,13 @@ for target in $target_list; do
>        ;;
>      ppc64-*)
>        container_hosts=x86_64
> -      container_image=debian-ppc64-cross
> -      container_cross_cc=powerpc64-linux-gnu-gcc
> +      container_image=debian-ppc64-test-cross
> +      container_cross_cc=powerpc64-linux-gnu-gcc-10
>        ;;
>      ppc64le-*)
>        container_hosts=x86_64
> -      container_image=debian-ppc64el-cross
> -      container_cross_cc=powerpc64le-linux-gnu-gcc
> +      container_image=debian-ppc64el-test-cross
> +      container_cross_cc=powerpc64le-linux-gnu-gcc-10
>        ;;
>      riscv64-*)
>        container_hosts=x86_64
> @@ -280,6 +280,10 @@ for target in $target_list; do
>                 -mpower8-vector -o $TMPE $TMPC; then
>                  echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak
>              fi
> +            if do_compiler "$target_compiler" $target_compiler_cflags \
> +               -mpower10 -o $TMPE $TMPC; then
> +                echo "CROSS_CC_HAS_POWER10=y" >> $config_target_mak
> +            fi
>          ;;
>          i386-linux-user)
>              if do_compiler "$target_compiler" $target_compiler_cflags \

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]