From: Brian Foster <bfoster@redhat.com>
To: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH v17 11/11] xfs: Add delay ready attr set routines
Date: Fri, 23 Apr 2021 15:08:18 -0400 [thread overview]
Message-ID: <YIMbIiSgkzY06rRf@bfoster> (raw)
In-Reply-To: <20210416092045.2215-12-allison.henderson@oracle.com>
On Fri, Apr 16, 2021 at 02:20:45AM -0700, Allison Henderson wrote:
> This patch modifies the attr set routines to be delay ready. This means
> they no longer roll or commit transactions, but instead return -EAGAIN
> to have the calling routine roll and refresh the transaction. In this
> series, xfs_attr_set_args has become xfs_attr_set_iter, which uses a
> state machine like switch to keep track of where it was when EAGAIN was
> returned. See xfs_attr.h for a more detailed diagram of the states.
>
> Two new helper functions have been added: xfs_attr_rmtval_find_space and
> xfs_attr_rmtval_set_blk. They provide a subset of logic similar to
> xfs_attr_rmtval_set, but they store the current block in the delay attr
> context to allow the caller to roll the transaction between allocations.
> This helps to simplify and consolidate code used by
> xfs_attr_leaf_addname and xfs_attr_node_addname. xfs_attr_set_args has
> now become a simple loop to refresh the transaction until the operation
> is completed. Lastly, xfs_attr_rmtval_remove is no longer used, and is
> removed.
>
> Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
> ---
This one looks good to me. My feedback is mostly around some code
formatting and comments, so again I've just appended a diff for your
review. With the various nits addressed:
Reviewed-by: Brian Foster <bfoster@redhat.com>
--- 8< ---
diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
index 302e44efa985..3e242eeac3d7 100644
--- a/fs/xfs/libxfs/xfs_attr.c
+++ b/fs/xfs/libxfs/xfs_attr.c
@@ -337,15 +337,15 @@ xfs_attr_set_iter(
/* State machine switch */
switch (dac->dela_state) {
case XFS_DAS_UNINIT:
- if (xfs_attr_is_shortform(dp))
- return xfs_attr_set_fmt(dac, leaf_bp);
-
/*
- * After a shortform to leaf conversion, we need to hold the
- * leaf and cycle out the transaction. When we get back,
- * we need to release the leaf to release the hold on the leaf
- * buffer.
+ * If the fork is shortform, attempt to add the attr. If there
+ * is no space, this converts to leaf format and returns
+ * -EAGAIN with the leaf buffer held across the roll. The caller
+ * will deal with a transaction roll error, but otherwise
+ * release the hold once we return with a clean transaction.
*/
+ if (xfs_attr_is_shortform(dp))
+ return xfs_attr_set_fmt(dac, leaf_bp);
if (*leaf_bp != NULL) {
xfs_trans_bhold_release(args->trans, *leaf_bp);
*leaf_bp = NULL;
@@ -354,10 +354,6 @@ xfs_attr_set_iter(
if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
error = xfs_attr_leaf_try_add(args, *leaf_bp);
if (error == -ENOSPC) {
- /*
- * Promote the attribute list to the Btree
- * format.
- */
error = xfs_attr3_leaf_to_node(args);
if (error)
return error;
@@ -382,8 +378,6 @@ xfs_attr_set_iter(
}
dac->dela_state = XFS_DAS_FOUND_LBLK;
- return -EAGAIN;
-
} else {
error = xfs_attr_node_addname_find_attr(dac);
if (error)
@@ -394,8 +388,8 @@ xfs_attr_set_iter(
return error;
dac->dela_state = XFS_DAS_FOUND_NBLK;
- return -EAGAIN;
}
+ return -EAGAIN;
case XFS_DAS_FOUND_LBLK:
/*
* If there was an out-of-line value, allocate the blocks we
@@ -415,14 +409,13 @@ xfs_attr_set_iter(
}
/*
- * Roll through the "value", allocating blocks on disk as
- * required.
+ * Repeat allocating remote blocks for the attr value until
+ * blkcnt drops to zero.
*/
if (dac->blkcnt > 0) {
error = xfs_attr_rmtval_set_blk(dac);
if (error)
return error;
-
return -EAGAIN;
}
@@ -430,14 +423,13 @@ xfs_attr_set_iter(
if (error)
return error;
+ /*
+ * If this is not a rename, clear the incomplete flag and we're
+ * done.
+ */
if (!(args->op_flags & XFS_DA_OP_RENAME)) {
- /*
- * Added a "remote" value, just clear the incomplete
- *flag.
- */
if (args->rmtblkno > 0)
error = xfs_attr3_leaf_clearflag(args);
-
return error;
}
@@ -450,7 +442,6 @@ xfs_attr_set_iter(
* In a separate transaction, set the incomplete flag on the
* "old" attr and clear the incomplete flag on the "new" attr.
*/
-
error = xfs_attr3_leaf_flipflags(args);
if (error)
return error;
@@ -466,16 +457,14 @@ xfs_attr_set_iter(
* "remote" value (if it exists).
*/
xfs_attr_restore_rmt_blk(args);
-
error = xfs_attr_rmtval_invalidate(args);
if (error)
return error;
- /* Set state in case xfs_attr_rmtval_remove returns -EAGAIN */
- dac->dela_state = XFS_DAS_RM_LBLK;
-
/* fallthrough */
case XFS_DAS_RM_LBLK:
+ /* Set state in case xfs_attr_rmtval_remove returns -EAGAIN */
+ dac->dela_state = XFS_DAS_RM_LBLK;
if (args->rmtblkno) {
error = __xfs_attr_rmtval_remove(dac);
if (error)
@@ -488,8 +477,9 @@ xfs_attr_set_iter(
/* fallthrough */
case XFS_DAS_RD_LEAF:
/*
- * Read in the block containing the "old" attr, then remove the
- * "old" attr from that block (neat, huh!)
+ * This is the last step for leaf format. Read the block with
+ * the old attr, remove the old attr, check for shortform
+ * conversion and return.
*/
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno,
&bp);
@@ -498,9 +488,6 @@ xfs_attr_set_iter(
xfs_attr3_leaf_remove(bp, args);
- /*
- * If the result is small enough, shrink it all into the inode.
- */
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff)
error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
@@ -510,36 +497,29 @@ xfs_attr_set_iter(
case XFS_DAS_FOUND_NBLK:
/*
- * If there was an out-of-line value, allocate the blocks we
- * identified for its storage and copy the value. This is done
- * after we create the attribute so that we don't overflow the
- * maximum size of a transaction and/or hit a deadlock.
+ * Find space for remote blocks and fall into the allocation
+ * state.
*/
if (args->rmtblkno > 0) {
- /*
- * Open coded xfs_attr_rmtval_set without trans
- * handling
- */
error = xfs_attr_rmtval_find_space(dac);
if (error)
return error;
-
- /*
- * Roll through the "value", allocating blocks on disk
- * as required. Set the state in case of -EAGAIN return
- * code
- */
- dac->dela_state = XFS_DAS_ALLOC_NODE;
}
/* fallthrough */
case XFS_DAS_ALLOC_NODE:
+ /*
+ * If there was an out-of-line value, allocate the blocks we
+ * identified for its storage and copy the value. This is done
+ * after we create the attribute so that we don't overflow the
+ * maximum size of a transaction and/or hit a deadlock.
+ */
+ dac->dela_state = XFS_DAS_ALLOC_NODE;
if (args->rmtblkno > 0) {
if (dac->blkcnt > 0) {
error = xfs_attr_rmtval_set_blk(dac);
if (error)
return error;
-
return -EAGAIN;
}
@@ -548,11 +528,11 @@ xfs_attr_set_iter(
return error;
}
+ /*
+ * If this was not a rename, clear the incomplete flag and we're
+ * done.
+ */
if (!(args->op_flags & XFS_DA_OP_RENAME)) {
- /*
- * Added a "remote" value, just clear the incomplete
- * flag.
- */
if (args->rmtblkno > 0)
error = xfs_attr3_leaf_clearflag(args);
goto out;
@@ -588,11 +568,10 @@ xfs_attr_set_iter(
if (error)
return error;
- /* Set state in case xfs_attr_rmtval_remove returns -EAGAIN */
- dac->dela_state = XFS_DAS_RM_NBLK;
-
/* fallthrough */
case XFS_DAS_RM_NBLK:
+ /* Set state in case xfs_attr_rmtval_remove returns -EAGAIN */
+ dac->dela_state = XFS_DAS_RM_NBLK;
if (args->rmtblkno) {
error = __xfs_attr_rmtval_remove(dac);
if (error)
@@ -604,7 +583,12 @@ xfs_attr_set_iter(
/* fallthrough */
case XFS_DAS_CLR_FLAG:
+ /*
+ * The last state for node format. Look up the old attr and
+ * remove it.
+ */
error = xfs_attr_node_addname_clear_incomplete(dac);
+ break;
default:
ASSERT(dac->dela_state != XFS_DAS_RM_SHRINK);
break;
next prev parent reply other threads:[~2021-04-23 19:08 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 9:20 [PATCH v17 00/11] xfs: Delay Ready Attributes Allison Henderson
2021-04-16 9:20 ` [PATCH v17 01/11] xfs: Reverse apply 72b97ea40d Allison Henderson
2021-04-16 9:20 ` [PATCH v17 02/11] xfs: Add xfs_attr_node_remove_cleanup Allison Henderson
2021-04-16 9:20 ` [PATCH v17 03/11] xfs: Hoist xfs_attr_set_shortform Allison Henderson
2021-04-16 9:20 ` [PATCH v17 04/11] xfs: Add helper xfs_attr_set_fmt Allison Henderson
2021-04-16 9:20 ` [PATCH v17 05/11] xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete Allison Henderson
2021-04-19 5:15 ` Chandan Babu R
2021-04-19 18:32 ` Allison Henderson
2021-04-20 12:14 ` Chandan Babu R
2021-04-20 17:41 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 06/11] xfs: Add helper xfs_attr_node_addname_find_attr Allison Henderson
2021-04-16 9:20 ` [PATCH v17 07/11] xfs: Hoist xfs_attr_node_addname Allison Henderson
2021-04-19 5:31 ` Chandan Babu R
2021-04-19 18:32 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 08/11] xfs: Hoist xfs_attr_leaf_addname Allison Henderson
2021-04-23 17:06 ` Brian Foster
2021-04-24 3:26 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 09/11] xfs: Hoist node transaction handling Allison Henderson
2021-04-16 9:20 ` [PATCH v17 10/11] xfs: Add delay ready attr remove routines Allison Henderson
2021-04-19 6:53 ` Chandan Babu R
2021-04-19 18:32 ` Allison Henderson
2021-04-23 17:06 ` Brian Foster
2021-04-24 3:27 ` Allison Henderson
2021-04-24 15:56 ` Darrick J. Wong
2021-04-26 11:49 ` Brian Foster
2021-04-26 16:52 ` Allison Henderson
2021-04-16 9:20 ` [PATCH v17 11/11] xfs: Add delay ready attr set routines Allison Henderson
2021-04-23 19:08 ` Brian Foster [this message]
2021-04-24 3:27 ` Allison Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YIMbIiSgkzY06rRf@bfoster \
--to=bfoster@redhat.com \
--cc=allison.henderson@oracle.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.