All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: kvalo@codeaurora.org, wcn36xx@lists.infradead.org,
	linux-wireless@vger.kernel.org, shawn.guo@linaro.org,
	benl@squareup.com, loic.poulain@linaro.org
Subject: Re: [PATCH] wcn36xx: Move hal_buf allocation to devm_kmalloc in probe
Date: Sat, 12 Jun 2021 21:55:46 -0500	[thread overview]
Message-ID: <YMVzsh7CxGUmTprx@yoga> (raw)
In-Reply-To: <20210605173347.2266003-1-bryan.odonoghue@linaro.org>

On Sat 05 Jun 12:33 CDT 2021, Bryan O'Donoghue wrote:

> Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem
> since we should have setup all of the buffers we required by the time
> ieee80211_register_hw() is called.
> 
> struct ieee80211_ops callbacks may run prior to mac_start() and therefore
> wcn->hal_buf must be initialized.
> 
> This is easily remediated by moving the allocation to probe() taking the
> opportunity to tidy up freeing memory by using devm_kmalloc().
> 
> Fixes: 8e84c2582169 ('wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680
> hardware')
> 

I don't think you're supposed to have an empty line between your Fixes
and S-o-b. That said, this looks good and your reasoning is sound.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>  drivers/net/wireless/ath/wcn36xx/main.c | 21 ++++++++-------------
>  1 file changed, 8 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index 84e117e0546c..2ccf7a8924a0 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -296,23 +296,16 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
>  		goto out_free_dxe_pool;
>  	}
>  
> -	wcn->hal_buf = kmalloc(WCN36XX_HAL_BUF_SIZE, GFP_KERNEL);
> -	if (!wcn->hal_buf) {
> -		wcn36xx_err("Failed to allocate smd buf\n");
> -		ret = -ENOMEM;
> -		goto out_free_dxe_ctl;
> -	}
> -
>  	ret = wcn36xx_smd_load_nv(wcn);
>  	if (ret) {
>  		wcn36xx_err("Failed to push NV to chip\n");
> -		goto out_free_smd_buf;
> +		goto out_free_dxe_ctl;
>  	}
>  
>  	ret = wcn36xx_smd_start(wcn);
>  	if (ret) {
>  		wcn36xx_err("Failed to start chip\n");
> -		goto out_free_smd_buf;
> +		goto out_free_dxe_ctl;
>  	}
>  
>  	if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) {
> @@ -339,8 +332,6 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
>  
>  out_smd_stop:
>  	wcn36xx_smd_stop(wcn);
> -out_free_smd_buf:
> -	kfree(wcn->hal_buf);
>  out_free_dxe_ctl:
>  	wcn36xx_dxe_free_ctl_blks(wcn);
>  out_free_dxe_pool:
> @@ -375,8 +366,6 @@ static void wcn36xx_stop(struct ieee80211_hw *hw)
>  
>  	wcn36xx_dxe_free_mem_pools(wcn);
>  	wcn36xx_dxe_free_ctl_blks(wcn);
> -
> -	kfree(wcn->hal_buf);
>  }
>  
>  static void wcn36xx_change_ps(struct wcn36xx *wcn, bool enable)
> @@ -1499,6 +1488,12 @@ static int wcn36xx_probe(struct platform_device *pdev)
>  	mutex_init(&wcn->hal_mutex);
>  	mutex_init(&wcn->scan_lock);
>  
> +	wcn->hal_buf = devm_kmalloc(wcn->dev, WCN36XX_HAL_BUF_SIZE, GFP_KERNEL);
> +	if (!wcn->hal_buf) {
> +		ret = -ENOMEM;
> +		goto out_wq;
> +	}
> +
>  	ret = dma_set_mask_and_coherent(wcn->dev, DMA_BIT_MASK(32));
>  	if (ret < 0) {
>  		wcn36xx_err("failed to set DMA mask: %d\n", ret);
> -- 
> 2.30.1
> 

  parent reply	other threads:[~2021-06-13  2:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-05 17:33 [PATCH] wcn36xx: Move hal_buf allocation to devm_kmalloc in probe Bryan O'Donoghue
2021-06-12 11:04 ` Kalle Valo
2021-06-13  2:55 ` Bjorn Andersson [this message]
2021-06-14 15:27 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMVzsh7CxGUmTprx@yoga \
    --to=bjorn.andersson@linaro.org \
    --cc=benl@squareup.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=shawn.guo@linaro.org \
    --cc=wcn36xx@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.