Re: [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Thu 17 Jun 00:17 CDT 2021, Bhupesh Sharma wrote:

> SA8155p-adp board supports a new regulator - pmm8155au.
> 
> The output power management circuits in this regulator include:
> - FTS510 smps,
> - HFS510 smps, and
> - LDO510 linear regulators
> 
> Add support for the same.
> 
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/regulator/qcom-rpmh-regulator.c | 36 +++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index af41a517da99..6cca910a76de 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -883,6 +883,38 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
>  	{}
>  };
>  
> +static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
> +	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
> +	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
> +	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
> +	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510, "vdd-s4"),
> +	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510, "vdd-s5"),
> +	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
> +	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
> +	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
> +	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
> +	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
> +	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
> +	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
> +	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
> +	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
> +	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
> +	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
> +	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
> +	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
> +	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
> +	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
> +	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> +	{}
> +};
> +
>  static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
>  	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
>  	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
> @@ -1177,6 +1209,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
>  		.compatible = "qcom,pmc8180c-rpmh-regulators",
>  		.data = pm8150l_vreg_data,
>  	},
> +	{
> +		.compatible = "qcom,pmm8155au-rpmh-regulators",
> +		.data = pmm8155au_vreg_data,
> +	},
>  	{
>  		.compatible = "qcom,pmx55-rpmh-regulators",
>  		.data = pmx55_vreg_data,
> -- 
> 2.31.1
>