From: Moritz Fischer <mdf@kernel.org>
To: "Martin Hundebøll" <martin@geanix.com>
Cc: "Wu Hao" <hao.wu@intel.com>, "Tom Rix" <trix@redhat.com>,
"Moritz Fischer" <mdf@kernel.org>,
"Xu Yilun" <yilun.xu@intel.com>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Lee Jones" <lee.jones@linaro.org>,
"Mark Brown" <broonie@kernel.org>,
"Martin Hundebøll" <mhu@silicom.dk>,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-spi@vger.kernel.org
Subject: Re: [PATCH v3 2/4] spi: spi-altera-dfl: support n5010 feature revision
Date: Wed, 30 Jun 2021 11:48:28 -0700 [thread overview]
Message-ID: <YNy8fG5ojNHo2DGY@epycbox.lan> (raw)
In-Reply-To: <20210629121214.988036-3-martin@geanix.com>
On Tue, Jun 29, 2021 at 02:12:12PM +0200, Martin Hundebøll wrote:
> From: Martin Hundebøll <mhu@silicom.dk>
>
> The Max10 BMC on the Silicom n5010 PAC is slightly different than the
> existing BMC's, so use a dedicated feature revision detect it.
Nit: BMCs not BMC's
>
> Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
> ---
>
> Changes since v2:
> * None
>
> Changes since v1:
> * use feature revision from struct dfl_device instead of reading it
> from io-mem
>
> drivers/spi/spi-altera-dfl.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-altera-dfl.c b/drivers/spi/spi-altera-dfl.c
> index 3e32e4fe5895..f6cf7c8d9dac 100644
> --- a/drivers/spi/spi-altera-dfl.c
> +++ b/drivers/spi/spi-altera-dfl.c
> @@ -111,6 +111,13 @@ static struct spi_board_info m10_bmc_info = {
> .chip_select = 0,
> };
>
> +static struct spi_board_info m10_n5010_bmc_info = {
> + .modalias = "m10-n5010",
> + .max_speed_hz = 12500000,
> + .bus_num = 0,
> + .chip_select = 0,
> +};
> +
> static void config_spi_master(void __iomem *base, struct spi_master *master)
> {
> u64 v;
> @@ -130,6 +137,7 @@ static void config_spi_master(void __iomem *base, struct spi_master *master)
>
> static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
> {
> + struct spi_board_info *board_info = &m10_bmc_info;
> struct device *dev = &dfl_dev->dev;
> struct spi_master *master;
> struct altera_spi *hw;
> @@ -172,9 +180,12 @@ static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
> goto exit;
> }
>
> - if (!spi_new_device(master, &m10_bmc_info)) {
> + if (dfl_dev->revision == FME_FEATURE_REV_MAX10_SPI_N5010)
> + board_info = &m10_n5010_bmc_info;
> +
> + if (!spi_new_device(master, board_info)) {
> dev_err(dev, "%s failed to create SPI device: %s\n",
> - __func__, m10_bmc_info.modalias);
> + __func__, board_info->modalias);
> }
>
> return 0;
> --
> 2.31.0
>
Mark, if you're ok with this can you pick up patches 1/4 ("fpga: dfl:
expose feature revision from struct dfl_device") and this one?
The MFD and HWMON ones can go through the respective trees.
Thanks,
Moritz
next prev parent reply other threads:[~2021-06-30 18:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-29 12:12 [PATCH v3 0/4] fpga/mfd/hwmon: Initial support for Silicom N5010 PAC Martin Hundebøll
2021-06-29 12:12 ` [PATCH v3 1/4] fpga: dfl: expose feature revision from struct dfl_device Martin Hundebøll
2021-06-29 14:17 ` Wu, Hao
2021-06-29 18:04 ` matthew.gerlach
2021-06-29 12:12 ` [PATCH v3 2/4] spi: spi-altera-dfl: support n5010 feature revision Martin Hundebøll
2021-06-30 18:48 ` Moritz Fischer [this message]
2021-06-29 12:12 ` [PATCH v3 3/4] mfd: intel-m10-bmc: add n5010 variant Martin Hundebøll
2021-06-30 17:42 ` matthew.gerlach
2021-07-16 7:56 ` Lee Jones
2021-06-29 12:12 ` [PATCH v3 4/4] hwmon: intel-m10-bmc-hwmon: add n5010 sensors Martin Hundebøll
2021-06-29 22:09 ` matthew.gerlach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YNy8fG5ojNHo2DGY@epycbox.lan \
--to=mdf@kernel.org \
--cc=broonie@kernel.org \
--cc=hao.wu@intel.com \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=martin@geanix.com \
--cc=mhu@silicom.dk \
--cc=trix@redhat.com \
--cc=yilun.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.