From: Phil Auld <pauld@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Waiman Long <longman@redhat.com>, Ingo Molnar <mingo@kernel.org>,
Juri Lelli <juri.lelli@redhat.com>,
Vincent Guittot <vincent.guittot@linaro.org>,
stable@vger.kernel.org
Subject: Re: [PATCH] sched: Fix nr_uninterruptible race causing increasing load average
Date: Sun, 11 Jul 2021 09:19:56 -0400 [thread overview]
Message-ID: <YOrv/PvjudQ3HLPD@lorien.usersys.redhat.com> (raw)
In-Reply-To: <YOhHphFWGbfAVODd@hirez.programming.kicks-ass.net>
Hi Peter,
On Fri, Jul 09, 2021 at 02:57:10PM +0200 Peter Zijlstra wrote:
> On Thu, Jul 08, 2021 at 10:54:58AM -0400, Phil Auld wrote:
> > Sorry... I don't have a nice diagram. I'm still looking at what all those
> > macros actually mean on the various architectures.
>
> Don't worry about other architectures, lets focus on Power, because
> that's the case where you can reprouce funnies. Now Power only has 2
> barrier ops (not quite true, but close enough for all this):
>
> - SYNC is the full barrier
>
> - LWSYNC is a TSO like barrier
>
> Pretty much everything (LOAD-ACQUIRE, STORE-RELEASE, WMB, RMB) uses
> LWSYNC. Only MB result in SYNC.
>
> Power is 'funny' because their spinlocks are weaker than everybody
> else's, but AFAICT that doesn't seem relevant here.
>
Thanks.
> > Using what you have above I get the same thing. It looks like it should be
> > ordered but in practice it's not, and ordering it "more" as I did in the
> > patch, fixes it.
>
> And you're running Linus' tree, not some franken-kernel from RHT, right?
> As asked in that other email, can you try with just the WMB added? I
> really don't believe that RMB you added can make a difference.
So, no. Right now the reproducer is on the franken-kernel :(
As far as I can tell the relevant code paths (schedule, barriers, wakeup
etc) are all current and the same. I traced through your diagram and
it all matches exactly.
I have a suspicion that Linus's tree may hide it. I believe this is tickled
by NFS io, which I _think_ is effected by the unboud workqueue changes
that may make it less likely to do the wakeup on a different cpu. But
that's just speculation.
The issue is that the systems under test here are in a partner's lab
to which I have no direct access.
I will try to get an upstream build on there, if possible, as soon
as I can.
>
> Also, can you try with TTWU_QUEUE disabled (without any additional
> barriers added), that simplifies the wakeup path a lot.
>
Will do.
> > Is it possible that the bit field is causing some of the assumptions about
> > ordering in those various macros to be off?
>
> *should* not matter...
>
> prev->sched_contributes_to_load = X;
>
> smp_store_release(&prev->on_cpu, 0);
> asm("LWSYNC" : : : "memory");
> WRITE_ONCE(prev->on_cpu, 0);
>
> due to that memory clobber, the compiler must emit whatever stores are
> required for the bitfield prior to the LWSYNC.
>
> > I notice in all the comments about smp_mb__after_spinlock etc, it's always
> > WRITE_ONCE/READ_ONCE on the variables in question but we can't do that with
> > the bit field.
>
> Yeah, but both ->on_rq and ->sched_contributes_to_load are 'normal'
> stores. That said, given that ttwu() does a READ_ONCE() on ->on_rq, we
> should match that with WRITE_ONCE()...
>
> So I think we should do the below, but I don't believe it'll make a
> difference. Let me stare more.
>
I'm out of the office for the next week+ so don't stare to hard. I'll try to
get the tests you asked for as soon as I get back in the (home) office.
I'm not sure the below will make a difference either, but will try it too.
Thanks again for the help. And sorry for the timing.
Cheers,
Phil
> ---
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index ca9a523c9a6c..da93551b298d 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -1973,12 +1973,12 @@ void activate_task(struct rq *rq, struct task_struct *p, int flags)
> {
> enqueue_task(rq, p, flags);
>
> - p->on_rq = TASK_ON_RQ_QUEUED;
> + WRITE_ONCE(p->on_rq, TASK_ON_RQ_QUEUED);
> }
>
> void deactivate_task(struct rq *rq, struct task_struct *p, int flags)
> {
> - p->on_rq = (flags & DEQUEUE_SLEEP) ? 0 : TASK_ON_RQ_MIGRATING;
> + WRITE_ONCE(p->on_rq, (flags & DEQUEUE_SLEEP) ? 0 : TASK_ON_RQ_MIGRATING);
>
> dequeue_task(rq, p, flags);
> }
> @@ -5662,11 +5662,11 @@ static bool try_steal_cookie(int this, int that)
> if (p->core_occupation > dst->idle->core_occupation)
> goto next;
>
> - p->on_rq = TASK_ON_RQ_MIGRATING;
> + WRITE_ONCE(p->on_rq, TASK_ON_RQ_MIGRATING);
> deactivate_task(src, p, 0);
> set_task_cpu(p, this);
> activate_task(dst, p, 0);
> - p->on_rq = TASK_ON_RQ_QUEUED;
> + WRITE_ONCE(p->on_rq, TASK_ON_RQ_QUEUED);
>
> resched_curr(dst);
>
>
--
next prev parent reply other threads:[~2021-07-11 13:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-07 19:04 [PATCH] sched: Fix nr_uninterruptible race causing increasing load average Phil Auld
2021-07-08 7:26 ` Peter Zijlstra
2021-07-08 7:48 ` Peter Zijlstra
2021-07-08 7:54 ` Peter Zijlstra
2021-07-08 14:54 ` Phil Auld
2021-07-09 12:57 ` Peter Zijlstra
2021-07-11 13:19 ` Phil Auld [this message]
2021-07-08 13:25 ` Phil Auld
2021-07-09 11:38 ` Peter Zijlstra
2021-07-11 12:57 ` Phil Auld
2021-07-23 13:38 ` Phil Auld
2021-07-28 15:45 ` Phil Auld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YOrv/PvjudQ3HLPD@lorien.usersys.redhat.com \
--to=pauld@redhat.com \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=longman@redhat.com \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=stable@vger.kernel.org \
--cc=vincent.guittot@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.