All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, sibis@codeaurora.org,
	sboyd@kernel.org, mpubbise@codeaurora.org
Subject: Re: [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
Date: Wed, 11 Aug 2021 11:37:39 -0600	[thread overview]
Message-ID: <YRQK4xgxTAD2ALME@robh.at.kernel.org> (raw)
In-Reply-To: <1628618483-664-3-git-send-email-pillair@codeaurora.org>

On Tue, Aug 10, 2021 at 11:31:22PM +0530, Rakesh Pillai wrote:
> Add WPSS PIL loading support for SC7280 SoCs.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
>  .../bindings/remoteproc/qcom,hexagon-v56.yaml      | 79 ++++++++++++++++++++--
>  1 file changed, 74 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> index 5f3558e..9ae433c6 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
> @@ -17,6 +17,7 @@ properties:
>    compatible:
>      enum:
>        - qcom,qcs404-cdsp-pil
> +      - qcom,sc7280-wpss-pil
>        - qcom,sdm845-adsp-pil
>  
>    reg:
> @@ -26,25 +27,30 @@ properties:
>  
>    interrupts-extended:
>      minItems: 5
> -    maxItems: 5
> +    maxItems: 6
>  
>    interrupt-names:
>      minItems: 5
> -    maxItems: 5
> +    maxItems: 6
>  
>    clocks:
> -    minItems: 7
> +    minItems: 3

Patch 1 shows 3 clocks are valid...

>      maxItems: 8
>      description:
>        List of phandles and clock specifier pairs for the Hexagon,
>        per clock-names below.
>  
>    clock-names:
> -    minItems: 7
> +    minItems: 3
>      maxItems: 8
>  
>    power-domains:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
> +
> +  power-domain-names:
> +    minItems: 1
> +    maxItems: 2
>  
>    resets:
>      minItems: 1
> @@ -92,6 +98,7 @@ required:
>    - clocks
>    - clock-names
>    - power-domains
> +  - power-domain-names

It's not backwards compatible to add a required property.

>    - qcom,halt-regs
>    - memory-region
>    - qcom,smem-states
> @@ -129,6 +136,31 @@ allOf:
>          compatible:
>            contains:
>              enum:
> +              - qcom,sc7280-wpss-pil
> +    then:
> +      properties:
> +        interrupts-extended:
> +          items:
> +            - description: Watchdog interrupt
> +            - description: Fatal interrupt
> +            - description: Ready interrupt
> +            - description: Handover interrupt
> +            - description: Stop acknowledge interrupt
> +            - description: Shutdown acknowledge interrupt
> +        interrupt-names:
> +          items:
> +            - const: wdog
> +            - const: fatal
> +            - const: ready
> +            - const: handover
> +            - const: stop-ack
> +            - const: shutdown-ack

The items lists can go in the main section with 'minItems: 5' and just 
'minItems: 6' here.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
>                - qcom,sdm845-adsp-pil
>      then:
>        properties:
> @@ -211,6 +243,26 @@ allOf:
>          power-domains:
>            items:
>              - description: CX power domain
> +        power-domain-names:
> +          items:
> +            - const: cx
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sc7280-wpss-pil
> +    then:
> +      properties:
> +        power-domains:
> +          items:
> +            - description: CX power domain
> +            - description: MX power domain
> +        power-domain-names:
> +          items:
> +            - const: cx
> +            - const: mx

As 'cx' is always the first entry, the 'items' lists here can be moved 
to the main section and you just need minItems or maxItems in the 
if/then.

>  
>    - if:
>        properties:
> @@ -244,6 +296,23 @@ allOf:
>            items:
>              - const: restart
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sc7280-wpss-pil
> +    then:
> +      properties:
> +        resets:
> +          items:
> +            - description: AOSS restart
> +            - description: PDC SYNC
> +        reset-names:
> +          items:
> +            - const: restart
> +            - const: pdc_sync
> +
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> -- 
> 2.7.4
> 
> 

  parent reply	other threads:[~2021-08-11 17:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-10 18:01 [PATCH v2 0/3] Add support for sc7280 WPSS PIL loading Rakesh Pillai
2021-08-10 18:01 ` [PATCH v2 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML Rakesh Pillai
2021-08-10 18:01 ` [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support Rakesh Pillai
2021-08-11 17:24   ` Rob Herring
2021-09-09  8:36     ` pillair
2021-08-11 17:37   ` Rob Herring [this message]
2021-08-10 18:01 ` [PATCH v2 3/3] remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS Rakesh Pillai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YRQK4xgxTAD2ALME@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpubbise@codeaurora.org \
    --cc=pillair@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.