From: Rob Herring <robh@kernel.org>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
Date: Fri, 13 Aug 2021 12:39:50 -0500 [thread overview]
Message-ID: <YRauZkjqGnIi84cf@robh.at.kernel.org> (raw)
In-Reply-To: <20210804161325.26996-2-biju.das.jz@bp.renesas.com>
On Wed, Aug 04, 2021 at 05:13:24PM +0100, Biju Das wrote:
> Fix dtbs-check warning pinctrl-names:0:'default' was expected
> for r8a77470-iwg23s-sbc.dts file.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v3:
> * New patch to fix the dtbs-check warnings
> Ref:- https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210804091940.23983-1-biju.das.jz@bp.renesas.com/
> ---
> .../devicetree/bindings/mmc/renesas,sdhi.yaml | 65 ++++++++++++-------
> 1 file changed, 42 insertions(+), 23 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> index 677989bc5924..543eeb825dc3 100644
> --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> @@ -9,9 +9,6 @@ title: Renesas SDHI SD/MMC controller
> maintainers:
> - Wolfram Sang <wsa+renesas@sang-engineering.com>
>
> -allOf:
> - - $ref: "mmc-controller.yaml"
> -
> properties:
> compatible:
> oneOf:
> @@ -104,14 +101,51 @@ properties:
> pinctrl-1:
> maxItems: 1
>
> - pinctrl-names:
> - minItems: 1
> - items:
> - - const: default
> - - const: state_uhs
> + pinctrl-names: true
>
> max-frequency: true
>
> +allOf:
> + - $ref: "mmc-controller.yaml"
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,sdhi-mmc-r8a77470
> + then:
> + properties:
> + pinctrl-names:
> + items:
> + - const: state_uhs
> + else:
> + properties:
> + pinctrl-names:
> + minItems: 1
> + items:
> + - const: default
> + - const: state_uhs
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - renesas,sdhi-r7s72100
> + - renesas,sdhi-r7s9210
> + then:
> + properties:
> + clock-names:
> + items:
> + - const: core
> + - const: cd
This is already defined in the main section, no need for it here.
> + required:
> + - clock-names
> + description:
> + The internal card detection logic that exists in these controllers is
> + sectioned off to be run by a separate second clock source to allow
> + the main core clock to be turned off to save power.
> +
> required:
> - compatible
> - reg
> @@ -119,21 +153,6 @@ required:
> - clocks
> - power-domains
>
> -if:
> - properties:
> - compatible:
> - contains:
> - enum:
> - - renesas,sdhi-r7s72100
> - - renesas,sdhi-r7s9210
> -then:
> - required:
> - - clock-names
> - description:
> - The internal card detection logic that exists in these controllers is
> - sectioned off to be run by a separate second clock source to allow
> - the main core clock to be turned off to save power.
> -
> unevaluatedProperties: false
>
> examples:
> --
> 2.17.1
>
>
next prev parent reply other threads:[~2021-08-13 17:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-04 16:13 [PATCH v3 0/2] Document RZ/G2L SDHI controller bindings Biju Das
2021-08-04 16:13 ` [PATCH v3 1/2] dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning Biju Das
2021-08-13 17:39 ` Rob Herring [this message]
2021-08-13 18:03 ` Biju Das
2021-08-04 16:13 ` [PATCH v3 2/2] dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings Biju Das
2021-08-13 17:41 ` Rob Herring
2021-08-13 18:10 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YRauZkjqGnIi84cf@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=ulf.hansson@linaro.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.