All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Luca Ceresoli <luca@lucaceresoli.net>
Cc: linux-kernel@vger.kernel.org, Lee Jones <lee.jones@linaro.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	devicetree@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-watchdog@vger.kernel.org,
	Chiwoong Byun <woong.byun@samsung.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	Randy Dunlap <rdunlap@infradead.org>
Subject: Re: [PATCH v2 5/9] dt-bindings: mfd: add Maxim MAX77714 PMIC
Date: Tue, 26 Oct 2021 22:17:32 -0500	[thread overview]
Message-ID: <YXjEzMYd9iYbodxo@robh.at.kernel.org> (raw)
In-Reply-To: <20211019145919.7327-6-luca@lucaceresoli.net>

On Tue, Oct 19, 2021 at 04:59:15PM +0200, Luca Ceresoli wrote:
> Add bindings for the MAX77714 PMIC with GPIO, RTC and watchdog.
> 
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> 
> ---
> 
> Changes in v2: none
> ---
>  .../bindings/mfd/maxim,max77714.yaml          | 58 +++++++++++++++++++
>  MAINTAINERS                                   |  5 ++
>  2 files changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> new file mode 100644
> index 000000000000..2b0ce3b9bc92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
> +
> +maintainers:
> +  - Luca Ceresoli <luca@lucaceresoli.net>
> +
> +description: |
> +  MAX77714 is a Power Management IC with 4 buck regulators, 9
> +  low-dropout regulators, 8 GPIOs, RTC and watchdog.

Where's the regulators nodes and binding?

> +
> +properties:
> +  compatible:
> +    const: maxim,max77714
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +    description:
> +      The first cell is the IRQ number, the second cell is the trigger type.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic@1c {
> +            compatible = "maxim,max77714";
> +            reg = <0x1c>;
> +            interrupt-parent = <&gpio2>;
> +            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8d118d7957d2..514ff4a735e5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11386,6 +11386,11 @@ F:	drivers/power/supply/max77650-charger.c
>  F:	drivers/regulator/max77650-regulator.c
>  F:	include/linux/mfd/max77650.h
>  
> +MAXIM MAX77714 PMIC MFD DRIVER
> +M:	Luca Ceresoli <luca@lucaceresoli.net>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
> +
>  MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
>  M:	Javier Martinez Canillas <javier@dowhile0.org>
>  L:	linux-kernel@vger.kernel.org
> -- 
> 2.25.1
> 
> 

  reply	other threads:[~2021-10-27  3:17 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-19 14:59 [PATCH v2 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only) Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 1/9] mfd: max77686: Correct tab-based alignment of register addresses Luca Ceresoli
2021-10-21 15:53   ` Lee Jones
2021-10-19 14:59 ` [PATCH v2 2/9] rtc: max77686: convert comments to kernel-doc format Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 3/9] rtc: max77686: rename day-of-month defines Luca Ceresoli
2021-10-21  9:42   ` Alexandre Belloni
2021-10-19 14:59 ` [PATCH v2 4/9] rtc: max77686: remove unused code to read in 12-hour mode Luca Ceresoli
2021-10-21  9:43   ` Alexandre Belloni
2021-10-19 14:59 ` [PATCH v2 5/9] dt-bindings: mfd: add Maxim MAX77714 PMIC Luca Ceresoli
2021-10-27  3:17   ` Rob Herring [this message]
2021-10-29 15:50     ` Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 6/9] mfd: max77714: Add driver for " Luca Ceresoli
2021-10-20  7:00   ` Krzysztof Kozlowski
2021-10-21 18:43   ` Lee Jones
2021-10-27 10:32     ` Luca Ceresoli
2021-10-27 13:44       ` Lee Jones
2021-10-27 14:23         ` Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 7/9] watchdog: Kconfig: fix help text indentation Luca Ceresoli
2021-10-19 15:06   ` Guenter Roeck
2021-10-21 16:28     ` Luca Ceresoli
2021-10-19 14:59 ` [PATCH v2 8/9] watchdog: max77714: add driver for the watchdog in the MAX77714 PMIC Luca Ceresoli
2021-10-19 15:10   ` Guenter Roeck
2021-10-19 14:59 ` [PATCH v2 9/9] rtc: max77686: add MAX77714 support Luca Ceresoli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YXjEzMYd9iYbodxo@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=ldewangan@nvidia.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luca@lucaceresoli.net \
    --cc=rdunlap@infradead.org \
    --cc=wim@linux-watchdog.org \
    --cc=woong.byun@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.