Re: [PATCH v8 5/8] PCI/portdrv: add mechanism to turn on subdev regulators

["Krzysztof Wilczyński" <kw@linux.com>]

Hi Jim,

[...]
> [1] These regulators typically govern the actual power supply to the
>     endpoint chip.  Sometimes they may be a the official PCIe socket

In the above, did you mean to say "be at the"?

> +static void *alloc_subdev_regulators(struct device *dev)
> +{
> +	static const char * const supplies[] = {
> +		"vpcie3v3",
> +		"vpcie3v3aux",
> +		"vpcie12v",
> +	};
> +	const size_t size = sizeof(struct subdev_regulators)
> +		+ sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);

[...]
> +int pci_subdev_regulators_add_bus(struct pci_bus *bus)
> +{
> +	struct device *dev = &bus->dev;
> +	struct subdev_regulators *sr;
> +	int ret;
> +
> +	if (!pcie_is_port_dev(bus->self))
> +		return 0;
> +
> +	if (WARN_ON(bus->dev.driver_data))
> +		dev_err(dev, "multiple clients using dev.driver_data\n");

I have to ask - is the WARN_ON() above adding value given the nature of the
error?  Would dumping a stack be of interest to someone?

Having said that, why do we even need to assert this?  Can there be some
sort of a race condition with access happening here?

I am asking as pci_subdev_regulators_remove_bus() does not seem to be
concerned about this sort of thing yet it also accesses the same driver
data, and such.

[...]
> +/* forward declaration */
> +static struct pci_driver pcie_portdriver;

The comment above might not be needed as it's quite obvious what the code
at this line is for, I believe.

[...]
> @@ -131,6 +155,13 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
>  	if (status)
>  		return status;
>  
> +	if (dev->bus->ops &&
> +	    dev->bus->ops->add_bus &&
> +	    dev->bus->dev.driver_data) {
> +		pcie_portdriver.resume = subdev_regulator_resume;
> +		pcie_portdriver.suspend = subdev_regulator_suspend;
> +	}
> +
>  	pci_save_state(dev);

[...]
> @@ -237,6 +268,7 @@ static struct pci_driver pcie_portdriver = {
>  	.err_handler	= &pcie_portdrv_err_handler,
>  
>  	.driver.pm	= PCIE_PORTDRV_PM_OPS,
> +	/* Note: suspend and resume may be set during probe */

This comment here is for the "driver.pm" line above, correct?  If so, then
I would move it above the statement.  It's a little bit confusing
otherwise.

	Krzysztof