Re: [PATCH v5 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings

[Rob Herring <robh@kernel.org>]

On Wed, Dec 01, 2021 at 04:32:20PM -0800, quic_vamslank@quicinc.com wrote:
> From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> 
> Add device tree binding Documentation details for Qualcomm SDX65
> pinctrl driver.
> 
> Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml  | 174 ++++++++++++++++++
>  1 file changed, 174 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
> new file mode 100644
> index 000000000000..f3487717da83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
> @@ -0,0 +1,174 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SDX65 TLMM block
> +
> +maintainers:
> +  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
> +
> +description:
> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  SDX65 platform.
> +
> +properties:
> +  compatible:
> +    const: qcom,sdx65-tlmm
> +
> +  reg:
> +    description: Specifies the base address and size of the TLMM register space

Don't need a description.

> +    maxItems: 1
> +
> +  interrupts:
> +    description: Specifies the TLMM summary IRQ

Don't need a description.

> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description: Specifies the PIN numbers and Flags, as defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  gpio-reserved-ranges:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9])$"
> +            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
> +        minItems: 1
> +        maxItems: 150
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins. Functions are only valid for gpio pins.
> +        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
> +                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
> +                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
> +                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
> +                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
> +                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
> +                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
> +                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
> +                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
> +                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
> +                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
> +                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
> +                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
> +                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
> +                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
> +                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
> +                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
> +                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
> +                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
> +                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
> +                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
> +                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
> +                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
> +                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
> +                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
> +                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
> +                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
> +                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
> +                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
> +                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
> +                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
> +                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
> +                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
> +                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
> +                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
> +                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
> +                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
> +                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
> +                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
> +                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
> +                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
> +                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
> +                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
> +                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
> +                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
> +                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
> +                gpio ]
> +
> +      drive-strength:
> +        enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +        default: 2
> +        description:
> +          Selects the drive strength for the specified pins, in mA.
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |

The indentation is not consistent. Use 4 spaces per level.

> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        tlmm: pinctrl@f100000 {

Indent 4 fewer spaces.

> +                compatible = "qcom,sdx65-tlmm";
> +                reg = <0x03000000 0xdc2000>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 109>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                serial-pins {

Indent 8 fewer spaces.

> +                    pins = "gpio8", "gpio9";
> +                    function = "blsp_uart3";
> +                    drive-strength = <2>;
> +                    bias-disable;

Indent 8 fewer spaces.

> +                };
> +         };
> +...
> -- 
> 2.33.1
> 
>