From: Rob Herring <robh@kernel.org>
To: Piyush Mehta <piyush.mehta@xilinx.com>
Cc: gregkh@linuxfoundation.org, mka@chromium.org,
ravisadineni@chromium.org, stern@rowland.harvard.edu,
alcooperx@gmail.com, michal.simek@xilinx.com,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, git@xilinx.com, sgoud@xilinx.com
Subject: Re: [PATCH V2 1/2] dt-bindings: usb: misc: Add binding for Microchip usb2244 Controller
Date: Mon, 29 Nov 2021 20:11:53 -0600 [thread overview]
Message-ID: <YaWIafw+XB8tknpJ@robh.at.kernel.org> (raw)
In-Reply-To: <20211122062834.1812005-2-piyush.mehta@xilinx.com>
On Mon, Nov 22, 2021 at 11:58:33AM +0530, Piyush Mehta wrote:
> Microchip's USB224x family of Hi-Speed USB 2.0 flash media card controllers
> provides an ultra-fast interface between a USB host controller and flash
> media cards.
>
> Add dt-bindings documentation for Microchip's usb2244 Controller.
> USB224x is a USB 2.0 compliant ultra fast USB 2.0 multi-format,
> SD/MMC, and MS Flash Media Controllers.
>
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> ---
> Changes for V2:
> - Update reset polarity, make reset ACTIVE LOW in the dt-binding document.
> - Added usbsd node under the usb controller (usb0) node.
> - Remove Warning: decoded text below may be mangled, UTF-8 assumed.
>
> Review comments:
> Link: https://lore.kernel.org/lkml/CAL_JsqKu6vr3iCz1G7MtK6gyqAvn4s4mpuLOwPzJDEmyZeROig@mail.gmail.com/
> ---
> .../devicetree/bindings/usb/microchip,usb2244.yaml | 47 ++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb2244.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/microchip,usb2244.yaml b/Documentation/devicetree/bindings/usb/microchip,usb2244.yaml
> new file mode 100644
> index 0000000..1854313
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/microchip,usb2244.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/microchip,usb2244.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Bindings for the Microchip USB2244 Ultra Fast USB-SD Controller
> +
> +description:
> + Microchip USB224x is a USB 2.0 compliant, Hi-Speed bulk only mass
> + storage class peripheral controller intended for reading and writing
> + to popular flash media from the xDPicture Card, Memory Stick (MS),
> + Secure Digital (SD), and MultiMediaCard (MMC) families.
> +
> + USB224x is a flash media card reader solution fully compliant with the
> + USB 2.0 specification.
> +
> +maintainers:
> + - Piyush Mehta <piyush.mehta@xilinx.com>
> +
> +properties:
> + compatible:
> + const: microchip,usb2244
> +
> + reset-gpios:
> + maxItems: 1
> + description:
> + The phandle and specifier for the GPIO that controls the RESET line of
> + flash media controller.
> +
> +required:
> + - compatible
> + - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + usb0 {
> + usbsd {
> + compatible = "microchip,usb2244";
> + reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
> + };
This is not how the USB device binding works. See usb-device.yaml.
> + };
> +
> +...
> --
> 2.7.4
>
>
next prev parent reply other threads:[~2021-11-30 2:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-22 6:28 [PATCH V2 0/2] usb: misc: add support for microchip,usb2244 USB-SD controller Piyush Mehta
2021-11-22 6:28 ` [PATCH V2 1/2] dt-bindings: usb: misc: Add binding for Microchip usb2244 Controller Piyush Mehta
2021-11-30 2:11 ` Rob Herring [this message]
2021-11-30 10:23 ` Michal Simek
2021-11-22 6:28 ` [PATCH V2 2/2] usb: misc: usb244: add support for USB2 ultra fast sd controller Piyush Mehta
2021-11-22 7:02 ` Greg KH
2021-11-22 11:02 ` Michal Simek
2021-11-22 11:07 ` Greg KH
2021-11-30 2:14 ` Rob Herring
2021-11-30 10:42 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YaWIafw+XB8tknpJ@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=alcooperx@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=mka@chromium.org \
--cc=piyush.mehta@xilinx.com \
--cc=ravisadineni@chromium.org \
--cc=sgoud@xilinx.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.