Re: [PATCH v5 0/2] arm64: dts: renesas: r8a779a0 DU support

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Kieran,

On Tue, Nov 30, 2021 at 04:43:09PM +0000, Kieran Bingham wrote:
> Provide the DT nodes for the DSI found on the r8a779a0, and extend the
> falcon-cpu board add on with the TI SN65DSI86 bridge which is used to
> connect the DSI output to the mini display-port connector on the Falcon
> CPU board.
> 
> This has been successfully tested on a Falcon-V3U with patches to the
> rcar_du and sn65dsi86 which will be sent separately.
> 
> Since the previous version, the core "r8a779a0: Add DU support" has
> already been accepted into the renesas-drivers tree, and the "r8a779a0:
> Provide default DSI data-lanes" patch has been dropped in favour of a
> better construction in the two patches supplied here.

I've reposted the DSI driver and its bindings, and unless something goes
terribly wrong, I'll send a pull request in a couple of days.

Geert, how would you like to proceed with the DT changes ?

> Kieran Bingham (2):
>   arm64: dts: renesas: r8a779a0: Add DSI encoders
>   arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
> 
>  .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 79 +++++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a779a0.dtsi     | 60 ++++++++++++++
>  2 files changed, 139 insertions(+)
> 

-- 
Regards,

Laurent Pinchart