From: Rob Herring <robh@kernel.org>
To: Loic Poulain <loic.poulain@linaro.org>
Cc: bjorn.andersson@linaro.org, agross@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, shawn.guo@linaro.org
Subject: Re: [PATCH v3 1/2] dt-bindings: clock: Add qualcomm QCM2290 DISPCC bindings
Date: Thu, 16 Dec 2021 14:28:14 -0600 [thread overview]
Message-ID: <YbuhXocF5DtBWlUT@robh.at.kernel.org> (raw)
In-Reply-To: <1639588180-32454-1-git-send-email-loic.poulain@linaro.org>
On Wed, Dec 15, 2021 at 06:09:39PM +0100, Loic Poulain wrote:
> Add device tree bindings for display clock controller on QCM2290 SoCs.
>
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> v2: no change
> v3: Include dt-bindings header (qcom,dispcc-qcm2290.h) in that commit
>
> .../bindings/clock/qcom,qcm2290-dispcc.yaml | 87 ++++++++++++++++++++++
> include/dt-bindings/clock/qcom,dispcc-qcm2290.h | 34 +++++++++
> 2 files changed, 121 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
> create mode 100644 include/dt-bindings/clock/qcom,dispcc-qcm2290.h
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
> new file mode 100644
> index 00000000..44d5ce7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0-only
dual license
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display Clock & Reset Controller Binding for qcm2290
> +
> +maintainers:
> + - Loic Poulain <loic.poulain@linaro.org>
> +
> +description: |
> + Qualcomm display clock control module which supports the clocks, resets and
> + power domains on qcm2290.
> +
> + See also dt-bindings/clock/qcom,dispcc-qcm2290.h.
> +
> +properties:
> + compatible:
> + const: qcom,qcm2290-dispcc
> +
> + clocks:
> + items:
> + - description: Board XO source
> + - description: Board active-only XO source
> + - description: GPLL0 source from GCC
> + - description: GPLL0 div source from GCC
> + - description: Byte clock from DSI PHY
> + - description: Pixel clock from DSI PHY
> +
> + clock-names:
> + items:
> + - const: bi_tcxo
> + - const: bi_tcxo_ao
> + - const: gcc_disp_gpll0_clk_src
> + - const: gcc_disp_gpll0_div_clk_src
> + - const: dsi0_phy_pll_out_byteclk
> + - const: dsi0_phy_pll_out_dsiclk
> +
> + '#clock-cells':
> + const: 1
> +
> + '#reset-cells':
> + const: 1
> +
> + '#power-domain-cells':
> + const: 1
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - '#clock-cells'
> + - '#reset-cells'
> + - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
> + #include <dt-bindings/clock/qcom,rpmcc.h>
> + clock-controller@5f00000 {
> + compatible = "qcom,qcm2290-dispcc";
> + reg = <0x5f00000 0x20000>;
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> + <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
> + <&gcc GCC_DISP_GPLL0_CLK_SRC>,
> + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
> + <&dsi0_phy 0>,
> + <&dsi0_phy 1>;
> + clock-names = "bi_tcxo",
> + "bi_tcxo_ao",
> + "gcc_disp_gpll0_clk_src",
> + "gcc_disp_gpll0_div_clk_src",
> + "dsi0_phy_pll_out_byteclk",
> + "dsi0_phy_pll_out_dsiclk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +...
> diff --git a/include/dt-bindings/clock/qcom,dispcc-qcm2290.h b/include/dt-bindings/clock/qcom,dispcc-qcm2290.h
> new file mode 100644
> index 00000000..5b20fb0
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,dispcc-qcm2290.h
> @@ -0,0 +1,34 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
dual license
> +/*
> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_QCM2290_H
> +#define _DT_BINDINGS_CLK_QCOM_DISP_CC_QCM2290_H
> +
> +/* DISP_CC clocks */
> +#define DISP_CC_PLL0 0
> +#define DISP_CC_MDSS_AHB_CLK 1
> +#define DISP_CC_MDSS_AHB_CLK_SRC 2
> +#define DISP_CC_MDSS_BYTE0_CLK 3
> +#define DISP_CC_MDSS_BYTE0_CLK_SRC 4
> +#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 5
> +#define DISP_CC_MDSS_BYTE0_INTF_CLK 6
> +#define DISP_CC_MDSS_ESC0_CLK 7
> +#define DISP_CC_MDSS_ESC0_CLK_SRC 8
> +#define DISP_CC_MDSS_MDP_CLK 9
> +#define DISP_CC_MDSS_MDP_CLK_SRC 10
> +#define DISP_CC_MDSS_MDP_LUT_CLK 11
> +#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 12
> +#define DISP_CC_MDSS_PCLK0_CLK 13
> +#define DISP_CC_MDSS_PCLK0_CLK_SRC 14
> +#define DISP_CC_MDSS_VSYNC_CLK 15
> +#define DISP_CC_MDSS_VSYNC_CLK_SRC 16
> +#define DISP_CC_SLEEP_CLK 17
> +#define DISP_CC_SLEEP_CLK_SRC 18
> +#define DISP_CC_XO_CLK 19
> +#define DISP_CC_XO_CLK_SRC 20
> +
> +#define MDSS_GDSC 0
> +
> +#endif
> --
> 2.7.4
>
>
prev parent reply other threads:[~2021-12-16 20:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 17:09 [PATCH v3 1/2] dt-bindings: clock: Add qualcomm QCM2290 DISPCC bindings Loic Poulain
2021-12-15 17:09 ` [PATCH v3 2/2] clk: qcom: Add display clock controller driver for QCM2290 Loic Poulain
2021-12-16 3:52 ` Stephen Boyd
2021-12-16 20:28 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YbuhXocF5DtBWlUT@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.