From: Leon Romanovsky <leon@kernel.org>
To: Veerasenareddy Burru <vburru@marvell.com>
Cc: davem@davemloft.net, kuba@kernel.org, corbet@lwn.net,
netdev@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Abhijit Ayarekar <aayarekar@marvell.com>,
Satananda Burla <sburla@marvell.com>
Subject: Re: [PATCH 2/4] octeon_ep: add support for ndo ops.
Date: Sun, 13 Feb 2022 17:16:22 +0200 [thread overview]
Message-ID: <YgkgxhXrXPmdAuM2@unreal> (raw)
In-Reply-To: <20220210213306.3599-3-vburru@marvell.com>
On Thu, Feb 10, 2022 at 01:33:04PM -0800, Veerasenareddy Burru wrote:
> Add support for ndo ops to set MAC address, change MTU, get stats.
> Add control path support to set MAC address, change MTU, get stats,
> set speed, get and set link mode.
>
> Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
> Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
> Signed-off-by: Satananda Burla <sburla@marvell.com>
> ---
> .../marvell/octeon_ep/octep_ctrl_net.c | 105 ++++++++++++++++++
> .../ethernet/marvell/octeon_ep/octep_main.c | 67 +++++++++++
> 2 files changed, 172 insertions(+)
Please don't put "." in end of patch title.
>
> diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
> index 1f0d8ba3c8ee..be9b0f31c754 100644
> --- a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
> +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
> @@ -87,3 +87,108 @@ int octep_get_mac_addr(struct octep_device *oct, u8 *addr)
>
> return 0;
> }
> +
> +int octep_set_mac_addr(struct octep_device *oct, u8 *addr)
> +{
> + struct octep_ctrl_mbox_msg msg = { 0 };
> + struct octep_ctrl_net_h2f_req req = { 0 };
It is enough to write {} without 0.
> +
> + req.hdr.cmd = OCTEP_CTRL_NET_H2F_CMD_MAC;
> + req.mac.cmd = OCTEP_CTRL_NET_CMD_SET;
> + memcpy(&req.mac.addr, addr, ETH_ALEN);
> +
> + msg.hdr.flags = OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ;
> + msg.hdr.sizew = OCTEP_CTRL_NET_H2F_MAC_REQ_SZW;
> + msg.msg = &req;
> + return octep_ctrl_mbox_send(&oct->ctrl_mbox, &msg);
> +}
> +
> +int octep_set_mtu(struct octep_device *oct, int mtu)
> +{
> + struct octep_ctrl_mbox_msg msg = { 0 };
> + struct octep_ctrl_net_h2f_req req = { 0 };
> +
> + req.hdr.cmd = OCTEP_CTRL_NET_H2F_CMD_MTU;
> + req.mtu.cmd = OCTEP_CTRL_NET_CMD_SET;
> + req.mtu.val = mtu;
> +
> + msg.hdr.flags = OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ;
> + msg.hdr.sizew = OCTEP_CTRL_NET_H2F_MTU_REQ_SZW;
> + msg.msg = &req;
> + return octep_ctrl_mbox_send(&oct->ctrl_mbox, &msg);
> +}
> +
> +int octep_get_if_stats(struct octep_device *oct)
> +{
> + struct octep_ctrl_mbox_msg msg = { 0 };
> + struct octep_ctrl_net_h2f_req req = { 0 };
> + struct octep_iface_rx_stats *iface_rx_stats;
> + struct octep_iface_tx_stats *iface_tx_stats;
> + int err;
Reversed Christmas tree, in all functions.
> +
> + req.hdr.cmd = OCTEP_CTRL_NET_H2F_CMD_GET_IF_STATS;
> + req.mac.cmd = OCTEP_CTRL_NET_CMD_GET;
> + req.get_stats.offset = oct->ctrl_mbox_ifstats_offset;
> +
> + msg.hdr.flags = OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ;
> + msg.hdr.sizew = OCTEP_CTRL_NET_H2F_GET_STATS_REQ_SZW;
> + msg.msg = &req;
> + err = octep_ctrl_mbox_send(&oct->ctrl_mbox, &msg);
> + if (!err) {
Please use success oriented approach, in all places.
if (err)
return err;
....
> + iface_rx_stats = (struct octep_iface_rx_stats *)(oct->ctrl_mbox.barmem +
> + oct->ctrl_mbox_ifstats_offset);
> + iface_tx_stats = (struct octep_iface_tx_stats *)(oct->ctrl_mbox.barmem +
> + oct->ctrl_mbox_ifstats_offset +
> + sizeof(struct octep_iface_rx_stats)
> + );
> + memcpy(&oct->iface_rx_stats, iface_rx_stats, sizeof(struct octep_iface_rx_stats));
> + memcpy(&oct->iface_tx_stats, iface_tx_stats, sizeof(struct octep_iface_tx_stats));
> + }
> +
> + return 0;
> +}
> +
Thanks
next prev parent reply other threads:[~2022-02-13 15:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 21:33 [PATCH 0/4] Add octeon_ep driver Veerasenareddy Burru
2022-02-10 21:33 ` [PATCH 1/4] octeon_ep: Add driver framework and device initiazliation Veerasenareddy Burru
2022-02-11 2:29 ` Jakub Kicinski
2022-02-10 21:33 ` [PATCH 2/4] octeon_ep: add support for ndo ops Veerasenareddy Burru
2022-02-13 15:16 ` Leon Romanovsky [this message]
2022-02-10 21:33 ` [PATCH 3/4] octeon_ep: add Tx/Rx and interrupt support Veerasenareddy Burru
2022-02-10 21:33 ` [PATCH 4/4] octeon_ep: add ethtool support for Octeon PCI Endpoint NIC Veerasenareddy Burru
2022-02-11 21:40 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YgkgxhXrXPmdAuM2@unreal \
--to=leon@kernel.org \
--cc=aayarekar@marvell.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sburla@marvell.com \
--cc=vburru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.