All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: ath10k@lists.infradead.org
Subject: ath10k-firmware: QCA4019: hw1.0: Add Google Wifi BDFs
Date: Sat, 19 Mar 2022 19:10:33 -0700	[thread overview]
Message-ID: <YjaNGW252Ls/yDw8@localhost> (raw)

[-- Attachment #1: Type: text/plain, Size: 1914 bytes --]

Hi,

OpenWrt support for Google Wifi is under review, so I'd like to push the BDFs
into the mainline board-2.bin.

Per the wiki [1]:

 * description for what hardware this is

   - IPQ4019-based router, with two QCA4019 radios -- one for 2.4GHz (BMI board
     ID 16) and one for 5GHz (BMI board ID 21)
   - The Google Wifi product (notably, this is different than the Nest Wifi)
     was originally released in 2016, with a codename "Gale". It was refreshed
     in 2020 with near-identical hardware [2], using the same OS but a new BDF
     and new codename ("Breeze"). I include both Gale and Breeze BDFs but have
     only tested the former.

 * origin of the board file (did you create it yourself or where you
   downloaded)

   - Pulled from the factory device filesystem (version R89-13729.57.27), which
     supports both the "Gale" and the (very similar) "Breeze" variants

 * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) +
   md5sum of each new board file to add

   - QCA4019 hw1.0

     BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE'
     BoardMD5[0]: ea35e78c88a8571201da8b75edc9b881
     BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE'
     BoardMD5[1]: 44cbc4ca6cb7141ba4249615f7065582
     BoardNames[2]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE'
     BoardMD5[2]: b4ac055b3ab67d5a6f5607a96af39a1f
     BoardNames[3]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE'
     BoardMD5[3]: 8b26cb285032314247304114b8ac50e7

  Variant naming scheme reflects that used by other Google projects -- using a
  GO(ogle) prefix, an underscore (_), and the project code name, all in caps.

Attached filenames match the IDs above, with a '.bin' suffix appended.

Regards,
Brian

[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
[2] https://9to5google.com/2020/10/06/new-google-wifi-launch/

[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #5: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #6: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2022-03-20  2:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-20  2:10 Brian Norris [this message]
2022-04-13  9:05 ` ath10k-firmware: QCA4019: hw1.0: Add Google Wifi BDFs Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YjaNGW252Ls/yDw8@localhost \
    --to=computersforpeace@gmail.com \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.