All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Maíra Canal" <maira.canal@usp.br>
To: michael.hennerich@analog.com, lars@metafoo.de, jic23@kernel.org
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] iio: ad7266: convert probe to full device-managed
Date: Wed, 6 Apr 2022 12:12:36 -0300	[thread overview]
Message-ID: <Yk2t5D2x2+YorkTd@fedora> (raw)

Convert probe functions to device-managed variants, with exception of
the regulator, which required a devm_add_action_or_reset() hook
registration.

Signed-off-by: Maíra Canal <maira.canal@usp.br>
---
I apologize if you received this email more than once. For some reason, the
patch is not showing up on the linux-iio mailing list. I believe that the
problem was that Michael's Hennerich email on the MAINTAINERS list was
Michael.Hennerich@analog.com instead of michael.hennerich@analog.com. Anyway,
I am truly sorry with you received this email more than once.
---
 drivers/iio/adc/ad7266.c | 43 +++++++++++++---------------------------
 1 file changed, 14 insertions(+), 29 deletions(-)

diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index c17d9b5fbaf6..4f8f07d5c1a3 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -378,6 +378,11 @@ static const char * const ad7266_gpio_labels[] = {
 	"ad0", "ad1", "ad2",
 };
 
+static void ad7266_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
 static int ad7266_probe(struct spi_device *spi)
 {
 	struct ad7266_platform_data *pdata = spi->dev.platform_data;
@@ -398,9 +403,13 @@ static int ad7266_probe(struct spi_device *spi)
 		if (ret)
 			return ret;
 
+		ret = devm_add_action_or_reset(&spi->dev, ad7266_reg_disable, st->reg);
+		if (ret)
+			return ret;
+
 		ret = regulator_get_voltage(st->reg);
 		if (ret < 0)
-			goto error_disable_reg;
+			return ret;
 
 		st->vref_mv = ret / 1000;
 	} else {
@@ -423,7 +432,7 @@ static int ad7266_probe(struct spi_device *spi)
 						      GPIOD_OUT_LOW);
 				if (IS_ERR(st->gpios[i])) {
 					ret = PTR_ERR(st->gpios[i]);
-					goto error_disable_reg;
+					return ret;
 				}
 			}
 		}
@@ -459,35 +468,12 @@ static int ad7266_probe(struct spi_device *spi)
 	spi_message_add_tail(&st->single_xfer[1], &st->single_msg);
 	spi_message_add_tail(&st->single_xfer[2], &st->single_msg);
 
-	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, &iio_pollfunc_store_time,
 		&ad7266_trigger_handler, &iio_triggered_buffer_setup_ops);
 	if (ret)
-		goto error_disable_reg;
-
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto error_buffer_cleanup;
-
-	return 0;
-
-error_buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-error_disable_reg:
-	if (!IS_ERR(st->reg))
-		regulator_disable(st->reg);
-
-	return ret;
-}
-
-static void ad7266_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad7266_state *st = iio_priv(indio_dev);
+		return ret;
 
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	if (!IS_ERR(st->reg))
-		regulator_disable(st->reg);
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static const struct spi_device_id ad7266_id[] = {
@@ -502,7 +488,6 @@ static struct spi_driver ad7266_driver = {
 		.name	= "ad7266",
 	},
 	.probe		= ad7266_probe,
-	.remove		= ad7266_remove,
 	.id_table	= ad7266_id,
 };
 module_spi_driver(ad7266_driver);
-- 
2.35.1


             reply	other threads:[~2022-04-06 17:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-06 15:12 Maíra Canal [this message]
2022-04-07  3:18 ` [PATCH] iio: ad7266: convert probe to full device-managed Marcelo Schmitt
2022-04-07  9:00 ` Sa, Nuno
  -- strict thread matches above, loose matches on Subject: below --
2022-04-06 12:29 Maíra Canal
2022-04-06 12:16 Maíra Canal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yk2t5D2x2+YorkTd@fedora \
    --to=maira.canal@usp.br \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.