Re: [V3 0/3] arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Wed 06 Apr 10:04 CDT 2022, Doug Anderson wrote:

> Hi,
> 
> On Wed, Apr 6, 2022 at 12:16 AM Vijaya Krishna Nivarthi
> <quic_vnivarth@quicinc.com> wrote:
> >
> > WLAN rail was leaking power during RBSC/sleep even after turning BT off.
> > Change sleep pinctrl configuration to handle same.
> >
> > ---
> > v3: apply same change to active state and other sc7280*.dts* as well
> > v2: used bias-bus-hold as per review comments
> > v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
> > ---
> >
> > Vijaya Krishna Nivarthi (3):
> >   arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
> >   arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
> >   arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
> >
> >  arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 12 ++++++------
> >  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi                   | 12 ++++++------
> >  arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi                 | 13 ++++++++-----
> >  3 files changed, 20 insertions(+), 17 deletions(-)
> 
> Probably the subject of all the patches should be modified to talk
> about what each patch is applying to. Having 3 identically named
> patches is not ideal.
> 
> I'll let Bjorn chime in on whether he'd rather adjust the subject
> himself or whether he'd rather you re-send. In any case, with the
> subject modified then for all 3 patches:
> 

I've been fixing up a ton of these during the last few releases, so I
think it's time that I stop doing that.

Please resubmit this with subject prefixes that matches the existing git
log for each change.

> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Thanks,
Bjorn