All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Linyu Yuan <quic_linyyuan@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, Jack Pham <quic_jackp@quicinc.com>
Subject: Re: [PATCH v5 3/3] usb: typec: ucsi: Wait for the USB role switches
Date: Mon, 25 Apr 2022 11:14:24 +0300	[thread overview]
Message-ID: <YmZYYCorXsB3fM6T@kuha.fi.intel.com> (raw)
In-Reply-To: <1650597022-19793-4-git-send-email-quic_linyyuan@quicinc.com>

On Fri, Apr 22, 2022 at 11:10:22AM +0800, Linyu Yuan wrote:
> When role switch module probe late than ucsi module,
> fwnode_usb_role_switch_get() will return -EPROBE_DEFER,
> it is better to restart ucsi init work to find
> it again every 100ms, total wait time is 10 second.
> 
> It also means change ucsi init work to delayed_work.
> 
> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> v2: keep original con->num in debug log
> v3: change return value from -EAGAIN to PTR_ERR()
> v4: change subject line,
>     add counter for retry limit,
>     correct commit descripton to match change in V3
> v5: small update of commit description
> 
>  drivers/usb/typec/ucsi/ucsi.c | 32 ++++++++++++++++++++------------
>  drivers/usb/typec/ucsi/ucsi.h |  6 +++++-
>  2 files changed, 25 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index ce9192e..11f8808 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -1053,6 +1053,14 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
>  	con->num = index + 1;
>  	con->ucsi = ucsi;
>  
> +	cap->fwnode = ucsi_find_fwnode(con);
> +	con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
> +	if (IS_ERR(con->usb_role_sw)) {
> +		dev_err(ucsi->dev, "con%d: failed to get usb role switch\n",
> +			con->num);
> +		return PTR_ERR(con->usb_role_sw);
> +	}
> +
>  	/* Delay other interactions with the con until registration is complete */
>  	mutex_lock(&con->lock);
>  
> @@ -1088,7 +1096,6 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
>  	if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY)
>  		*accessory = TYPEC_ACCESSORY_DEBUG;
>  
> -	cap->fwnode = ucsi_find_fwnode(con);
>  	cap->driver_data = con;
>  	cap->ops = &ucsi_ops;
>  
> @@ -1147,13 +1154,6 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
>  		ucsi_port_psy_changed(con);
>  	}
>  
> -	con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
> -	if (IS_ERR(con->usb_role_sw)) {
> -		dev_err(ucsi->dev, "con%d: failed to get usb role switch\n",
> -			con->num);
> -		con->usb_role_sw = NULL;
> -	}
> -
>  	/* Only notify USB controller if partner supports USB data */
>  	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
>  		u_role = USB_ROLE_NONE;
> @@ -1286,12 +1286,20 @@ static int ucsi_init(struct ucsi *ucsi)
>  
>  static void ucsi_init_work(struct work_struct *work)
>  {
> -	struct ucsi *ucsi = container_of(work, struct ucsi, work);
> +	struct ucsi *ucsi = container_of(work, struct ucsi, work.work);
>  	int ret;
>  
>  	ret = ucsi_init(ucsi);
>  	if (ret)
>  		dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
> +
> +	if (ret == -EPROBE_DEFER) {
> +		if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT)
> +			return;
> +
> +		queue_delayed_work(system_long_wq, &ucsi->work,
> +				   UCSI_ROLE_SWITCH_INTERVAL);
> +	}
>  }
>  
>  /**
> @@ -1331,7 +1339,7 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
>  	if (!ucsi)
>  		return ERR_PTR(-ENOMEM);
>  
> -	INIT_WORK(&ucsi->work, ucsi_init_work);
> +	INIT_DELAYED_WORK(&ucsi->work, ucsi_init_work);
>  	mutex_init(&ucsi->ppm_lock);
>  	ucsi->dev = dev;
>  	ucsi->ops = ops;
> @@ -1366,7 +1374,7 @@ int ucsi_register(struct ucsi *ucsi)
>  	if (!ucsi->version)
>  		return -ENODEV;
>  
> -	queue_work(system_long_wq, &ucsi->work);
> +	queue_delayed_work(system_long_wq, &ucsi->work, 0);
>  
>  	return 0;
>  }
> @@ -1383,7 +1391,7 @@ void ucsi_unregister(struct ucsi *ucsi)
>  	u64 cmd = UCSI_SET_NOTIFICATION_ENABLE;
>  
>  	/* Make sure that we are not in the middle of driver initialization */
> -	cancel_work_sync(&ucsi->work);
> +	cancel_delayed_work_sync(&ucsi->work);
>  
>  	/* Disable notifications */
>  	ucsi->ops->async_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd));
> diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
> index 280f1e1..8eb391e 100644
> --- a/drivers/usb/typec/ucsi/ucsi.h
> +++ b/drivers/usb/typec/ucsi/ucsi.h
> @@ -287,7 +287,11 @@ struct ucsi {
>  	struct ucsi_capability cap;
>  	struct ucsi_connector *connector;
>  
> -	struct work_struct work;
> +	struct delayed_work work;
> +	int work_count;
> +#define UCSI_ROLE_SWITCH_RETRY_PER_HZ	10
> +#define UCSI_ROLE_SWITCH_INTERVAL	(HZ / UCSI_ROLE_SWITCH_RETRY_PER_HZ)
> +#define UCSI_ROLE_SWITCH_WAIT_COUNT	(10 * UCSI_ROLE_SWITCH_RETRY_PER_HZ)
>  
>  	/* PPM Communication lock */
>  	struct mutex ppm_lock;
> -- 
> 2.7.4

-- 
heikki

      reply	other threads:[~2022-04-25  8:15 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-22  3:10 [PATCH v5 0/3] usb: typec: ucsi: allow retry to find role switch Linyu Yuan
2022-04-22  3:10 ` [PATCH v5 1/3] usb: typec: ucsi: add a common function ucsi_unregister_connectors() Linyu Yuan
2022-04-25  8:09   ` Heikki Krogerus
2022-04-25  8:23     ` Linyu Yuan (QUIC)
2022-04-22  3:10 ` [PATCH v5 2/3] usb: typec: ucsi: do not allocate one extra unused connector Linyu Yuan
2022-04-25  8:13   ` Heikki Krogerus
2022-04-25  8:23     ` Linyu Yuan (QUIC)
2022-04-22  3:10 ` [PATCH v5 3/3] usb: typec: ucsi: Wait for the USB role switches Linyu Yuan
2022-04-25  8:14   ` Heikki Krogerus [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YmZYYCorXsB3fM6T@kuha.fi.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=quic_jackp@quicinc.com \
    --cc=quic_linyyuan@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.