Re: [PATCH v4 0/5] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>]

On Sun, May 01, 2022 at 10:21:44PM +0300, Dmitry Baryshkov wrote:
> PCIe pipe clk (and some other clocks) must be parked to the "safe"
> source (bi_tcxo) when corresponding GDSC is turned off and on again.
> Currently this is handcoded in the PCIe driver by reparenting the
> gcc_pipe_N_clk_src clock.
> 
> Instead of doing it manually, follow the approach used by
> clk_rcg2_shared_ops and implement this parking in the enable() and
> disable() clock operations for respective pipe clocks.
> 
> PCIe part depends on [1].
> 
> Changes since v3:
>  - Replaced the clock multiplexer implementation with branch-like clock.
> 
> Changes since v2:
>  - Added is_enabled() callback
>  - Added default parent to the pipe clock configuration
> 
> Changes since v1:
>  - Rebased on top of [1].
>  - Removed erroneous Fixes tag from the patch 4.
> 
> Changes since RFC:
>  - Rework clk-regmap-mux fields. Specify safe parent as P_* value rather
>    than specifying the register value directly
>  - Expand commit message to the first patch to specially mention that
>    it is required only on newer generations of Qualcomm chipsets.
> 
> [1]: https://lore.kernel.org/all/20220401133351.10113-1-johan+linaro@kernel.org/
> 
> Dmitry Baryshkov (5):
>   PCI: qcom: Remove unnecessary pipe_clk handling
>   clk: qcom: regmap: add pipe clk implementation
>   clk: qcom: gcc-sm8450: use new clk_regmap_pipe_ops for PCIe pipe
>     clocks
>   clk: qcom: gcc-sc7280: use new clk_regmap_pipe_ops for PCIe pipe
>     clocks
>   PCI: qcom: Drop manual pipe_clk_src handling
> 
>  drivers/clk/qcom/Makefile              |  1 +
>  drivers/clk/qcom/clk-regmap-pipe.c     | 62 ++++++++++++++++++++
>  drivers/clk/qcom/clk-regmap-pipe.h     | 24 ++++++++
>  drivers/clk/qcom/gcc-sc7280.c          | 49 ++++++----------
>  drivers/clk/qcom/gcc-sm8450.c          | 51 ++++++----------
>  drivers/pci/controller/dwc/pcie-qcom.c | 81 +-------------------------
>  6 files changed, 128 insertions(+), 140 deletions(-)
>  create mode 100644 drivers/clk/qcom/clk-regmap-pipe.c
>  create mode 100644 drivers/clk/qcom/clk-regmap-pipe.h

Hi guys,

where are we with this series ? I have noticed there is an ongoing
review so if you don't disagree I'd mark it as "Changes Requested" and
wait for a v5.

Thanks,
Lorenzo