From: Marcelo Tosatti <mtosatti@redhat.com>
To: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Cc: rafael@kernel.org, daniel.lezcano@linaro.org,
rostedt@goodmis.org, mingo@redhat.com, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, joao.m.martins@oracle.com
Subject: Re: [PATCH v2] cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrink
Date: Wed, 25 May 2022 14:31:29 -0300 [thread overview]
Message-ID: <Yo5n8TsSuU9/IxEh@fuller.cnet> (raw)
In-Reply-To: <20220523235332.162966-1-eiichi.tsukata@nutanix.com>
On Mon, May 23, 2022 at 11:53:32PM +0000, Eiichi Tsukata wrote:
> Add trace points as are implemented in KVM host halt polling.
> This helps tune guest halt polling params.
>
> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
> ---
> drivers/cpuidle/governors/haltpoll.c | 15 ++++++++-----
> include/trace/events/power.h | 33 ++++++++++++++++++++++++++++
> 2 files changed, 43 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/cpuidle/governors/haltpoll.c b/drivers/cpuidle/governors/haltpoll.c
> index cb2a96eafc02..a5b6ad32956c 100644
> --- a/drivers/cpuidle/governors/haltpoll.c
> +++ b/drivers/cpuidle/governors/haltpoll.c
> @@ -19,6 +19,7 @@
> #include <linux/sched.h>
> #include <linux/module.h>
> #include <linux/kvm_para.h>
> +#include <trace/events/power.h>
>
> static unsigned int guest_halt_poll_ns __read_mostly = 200000;
> module_param(guest_halt_poll_ns, uint, 0644);
> @@ -77,13 +78,16 @@ static int haltpoll_select(struct cpuidle_driver *drv,
>
> static void adjust_poll_limit(struct cpuidle_device *dev, u64 block_ns)
> {
> - unsigned int val;
> + unsigned int val, old;
>
> - /* Grow cpu_halt_poll_us if
> - * cpu_halt_poll_us < block_ns < guest_halt_poll_us
> + val = dev->poll_limit_ns;
> + old = val;
> +
> + /* Grow poll_limit_ns if
> + * poll_limit_ns < block_ns < guest_halt_poll_ns
> */
> if (block_ns > dev->poll_limit_ns && block_ns <= guest_halt_poll_ns) {
> - val = dev->poll_limit_ns * guest_halt_poll_grow;
> + val *= guest_halt_poll_grow;
>
> if (val < guest_halt_poll_grow_start)
> val = guest_halt_poll_grow_start;
> @@ -91,16 +95,17 @@ static void adjust_poll_limit(struct cpuidle_device *dev, u64 block_ns)
> val = guest_halt_poll_ns;
>
Can do it before the assignment:
trace_guest_halt_poll_ns_grow(val, dev->poll_limit_ns);
> dev->poll_limit_ns = val;
> + trace_guest_halt_poll_ns_grow(smp_processor_id(), val, old);
> } else if (block_ns > guest_halt_poll_ns &&
> guest_halt_poll_allow_shrink) {
> unsigned int shrink = guest_halt_poll_shrink;
>
> - val = dev->poll_limit_ns;
> if (shrink == 0)
> val = 0;
> else
> val /= shrink;
> dev->poll_limit_ns = val;
> + trace_guest_halt_poll_ns_shrink(smp_processor_id(), val, old);
> }
> }
>
> diff --git a/include/trace/events/power.h b/include/trace/events/power.h
> index af5018aa9517..db065af9c3c0 100644
> --- a/include/trace/events/power.h
> +++ b/include/trace/events/power.h
> @@ -500,6 +500,39 @@ DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_remove_request,
>
> TP_ARGS(name, type, new_value)
> );
> +
> +TRACE_EVENT(guest_halt_poll_ns,
> +
> + TP_PROTO(bool grow, unsigned int cpu_id,
> + unsigned int new, unsigned int old),
> +
> + TP_ARGS(grow, cpu_id, new, old),
> +
> + TP_STRUCT__entry(
> + __field(bool, grow)
> + __field(unsigned int, cpu_id)
> + __field(unsigned int, new)
> + __field(unsigned int, old)
> + ),
> +
> + TP_fast_assign(
> + __entry->grow = grow;
> + __entry->cpu_id = cpu_id;
> + __entry->new = new;
> + __entry->old = old;
> + ),
> +
> + TP_printk("cpu %u: halt_poll_ns %u (%s %u)",
> + __entry->cpu_id,
> + __entry->new,
> + __entry->grow ? "grow" : "shrink",
> + __entry->old)
> +);
> +
> +#define trace_guest_halt_poll_ns_grow(cpu_id, new, old) \
> + trace_guest_halt_poll_ns(true, cpu_id, new, old)
> +#define trace_guest_halt_poll_ns_shrink(cpu_id, new, old) \
> + trace_guest_halt_poll_ns(false, cpu_id, new, old)
> #endif /* _TRACE_POWER_H */
>
> /* This part must be outside protection */
> --
> 2.36.1
>
>
next prev parent reply other threads:[~2022-05-26 19:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-23 23:53 [PATCH v2] cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrink Eiichi Tsukata
2022-05-25 16:02 ` Steven Rostedt
2022-05-26 0:02 ` Eiichi Tsukata
2022-05-25 17:31 ` Marcelo Tosatti [this message]
2022-05-27 0:42 ` Eiichi Tsukata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yo5n8TsSuU9/IxEh@fuller.cnet \
--to=mtosatti@redhat.com \
--cc=daniel.lezcano@linaro.org \
--cc=eiichi.tsukata@nutanix.com \
--cc=joao.m.martins@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rafael@kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.