All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: Alexander Steffen <Alexander.Steffen@infineon.com>
Cc: linux-kernel@vger.kernel.org, linux-integrity@vger.kernel.org,
	peterhuewe@gmx.de, jgg@ziepe.ca,
	krzysztof.kozlowski+dt@linaro.org,
	Johannes Holland <johannes.holland@infineon.com>,
	Amir Mizinski <amirmizi6@gmail.com>
Subject: Re: [PATCH v5 2/3] tpm: Add tpm_tis_verify_crc to the tpm_tis_phy_ops protocol layer
Date: Tue, 7 Jun 2022 12:56:03 +0300	[thread overview]
Message-ID: <Yp8gsy2vv4Y0luYQ@iki.fi> (raw)
In-Reply-To: <20220603143532.8202-3-Alexander.Steffen@infineon.com>

On Fri, Jun 03, 2022 at 04:35:31PM +0200, Alexander Steffen wrote:
> Some TPMs, e.g. those implementing the I2C variant of TIS, can verify
> data transfers to/from the FIFO with a CRC. The CRC is calculated over
> the entirety of the FIFO register. Since the phy_ops layer is not aware
> when the core layer is done reading/writing the FIFO, CRC verification
> must be triggered from the core layer. To this end, add an optional
> phy_ops API call.
> 
> Co-developed-by: Johannes Holland <johannes.holland@infineon.com>
> Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
> Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
> Change-Id: I43716c8d45f62c0fcdaabfc3366f8deb89fd1f32

Strip off Change-Id.

> ---
>  drivers/char/tpm/tpm_tis_core.c | 14 ++++++++++++++
>  drivers/char/tpm/tpm_tis_core.h | 10 ++++++++++
>  2 files changed, 24 insertions(+)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index dc56b976d816..757623bacfd5 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -289,6 +289,7 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>  	int size = 0;
>  	int status;
>  	u32 expected;
> +	int rc;
>  
>  	if (count < TPM_HEADER_SIZE) {
>  		size = -EIO;
> @@ -328,6 +329,13 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>  		goto out;
>  	}
>  
> +	rc = tpm_tis_verify_crc(priv, (size_t)size, buf);
> +	if (rc < 0) {
> +		dev_err(&chip->dev, "CRC mismatch for response.\n");
> +		size = rc;
> +		goto out;
> +	}
> +
>  out:
>  	tpm_tis_ready(chip);
>  	return size;
> @@ -443,6 +451,12 @@ static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
>  	if (rc < 0)
>  		return rc;
>  
> +	rc = tpm_tis_verify_crc(priv, len, buf);
> +	if (rc < 0) {
> +		dev_err(&chip->dev, "CRC mismatch for command.\n");
> +		return rc;
> +	}
> +
>  	/* go and do it */
>  	rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
>  	if (rc < 0)
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index 6c203f36b8a1..66a5a13cd1df 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -121,6 +121,8 @@ struct tpm_tis_phy_ops {
>  			  u8 *result, enum tpm_tis_io_mode mode);
>  	int (*write_bytes)(struct tpm_tis_data *data, u32 addr, u16 len,
>  			   const u8 *value, enum tpm_tis_io_mode mode);
> +	int (*verify_crc)(struct tpm_tis_data *data, size_t len,
> +			  const u8 *value);
>  };
>  
>  static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
> @@ -188,6 +190,14 @@ static inline int tpm_tis_write32(struct tpm_tis_data *data, u32 addr,
>  	return rc;
>  }
>  
> +static inline int tpm_tis_verify_crc(struct tpm_tis_data *data, size_t len,
> +				     const u8 *value)
> +{
> +	if (!data->phy_ops->verify_crc)
> +		return 0;

I think it would be more readable to have one empty line here.

> +	return data->phy_ops->verify_crc(data, len, value);
> +}
> +
>  static inline bool is_bsw(void)
>  {
>  #ifdef CONFIG_X86
> -- 
> 2.25.1
> 

Other than that LGTM.

BR, Jarkko

  reply	other threads:[~2022-06-07  9:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-03 14:35 [PATCH v5 0/3] tpm_tis_i2c Alexander Steffen
2022-06-03 14:35 ` [PATCH v5 1/3] dt-bindings: trivial-devices: Add two I2C TPM devices Alexander Steffen
2022-06-05 22:56   ` Rob Herring
2022-06-03 14:35 ` [PATCH v5 2/3] tpm: Add tpm_tis_verify_crc to the tpm_tis_phy_ops protocol layer Alexander Steffen
2022-06-07  9:56   ` Jarkko Sakkinen [this message]
2022-06-03 14:35 ` [PATCH v5 3/3] tpm: Add tpm_tis_i2c backend for tpm_tis_core Alexander Steffen
2022-06-07 10:00   ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yp8gsy2vv4Y0luYQ@iki.fi \
    --to=jarkko@kernel.org \
    --cc=Alexander.Steffen@infineon.com \
    --cc=amirmizi6@gmail.com \
    --cc=jgg@ziepe.ca \
    --cc=johannes.holland@infineon.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.