Re: [V4] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled

[Greg KH <gregkh@linuxfoundation.org>]

On Mon, May 23, 2022 at 11:32:46PM +0200, Marek Szyprowski wrote:
> Hi,
> 
> On 16.05.2022 11:20, Vijaya Krishna Nivarthi wrote:
> > For the case of console_suspend disabled, if back to back suspend/resume
> > test is executed, at the end of test, sometimes console would appear to
> > be frozen not responding to input. This would happen because, during
> > resume, rx transactions can come in before system is ready, malfunction
> > of rx happens in turn resulting in console appearing to be stuck.
> >
> > Do a stop_rx in suspend sequence to prevent this.
> >
> > Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> > ---
> > v4: moved the change to serial core to apply for all drivers
> > v3: swapped the order of conditions to be more human readable
> > v2: restricted patch to contain only stop_rx in suspend sequence
> > v1: intial patch contained 2 additional unrelated changes in vicinity
> > ---
> 
> This patch landed recently in linux-next as commit c9d2325cdb92 
> ("serial: core: Do stop_rx in suspend path for console if 
> console_suspend is disabled").
> 
> Unfortunately it breaks console operation on my test systems after 
> system suspend/resume cycle if 'no_console_suspend' kernel parameter is 
> present. System properly resumes from suspend, the console displays all 
> the messages and even command line prompt, but then doesn't react on any 
> input. If I remove the 'no_console_suspend' parameter, the console is 
> again operational after system suspend/resume cycle. Before this patch 
> it worked fine regardless the 'no_console_suspend' parameter.

Did this ever get resolved or do I need to revert this?

thanks,

greg k-h