From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Robert Marko <robimarko@gmail.com>
Cc: agross@kernel.org, jassisinghbrar@gmail.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com,
sboyd@kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, Ansuel Smith <ansuelsmth@gmail.com>
Subject: Re: [PATCH v4 3/6] clk: qcom: Add IPQ8074 APSS clock controller
Date: Thu, 30 Jun 2022 18:03:17 -0500 [thread overview]
Message-ID: <Yr4rte8Va+TgG9CM@builder.lan> (raw)
In-Reply-To: <20220515204540.477711-3-robimarko@gmail.com>
On Sun 15 May 15:45 CDT 2022, Robert Marko wrote:
> IPQ8074 APSS clock controller provides the clock for the IPQ8074 CPU
> cores, thus also providing support for CPU frequency scaling.
>
> It looks like they are clocked by the XO and a custom APSS type PLL.
>
> Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
> Changes in v2:
> * Convert to using parent-data instead of parent-names
> ---
> drivers/clk/qcom/Kconfig | 11 +++
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/apss-ipq8074.c | 170 ++++++++++++++++++++++++++++++++
> 3 files changed, 182 insertions(+)
> create mode 100644 drivers/clk/qcom/apss-ipq8074.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 00fe5f066de5..9494eb74374a 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -134,6 +134,17 @@ config IPQ_APSS_6018
> Say Y if you want to support CPU frequency scaling on
> ipq based devices.
>
> +config IPQ_APSS_8074
> + tristate "IPQ8074 APSS Clock Controller"
> + select IPQ_GCC_8074
> + depends on QCOM_APCS_IPC || COMPILE_TEST
> + help
> + Support for APSS clock controller on IPQ8074 platforms. The
> + APSS clock controller manages the Mux and enable block that feeds the
> + CPUs.
> + Say Y if you want to support CPU frequency scaling on
> + IPQ8074 based devices.
> +
> config IPQ_GCC_4019
> tristate "IPQ4019 Global Clock Controller"
> help
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 671cf5821af1..7b2da6dd570c 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
> obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
> obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
> obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
> +obj-$(CONFIG_IPQ_APSS_8074) += apss-ipq8074.o
> obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
> obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
> diff --git a/drivers/clk/qcom/apss-ipq8074.c b/drivers/clk/qcom/apss-ipq8074.c
> new file mode 100644
> index 000000000000..38d03cd0ff76
> --- /dev/null
> +++ b/drivers/clk/qcom/apss-ipq8074.c
> @@ -0,0 +1,170 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,apss-ipq8074.h>
> +
> +#include "common.h"
> +#include "clk-regmap.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-branch.h"
> +#include "clk-alpha-pll.h"
> +#include "clk-regmap-divider.h"
> +#include "clk-regmap-mux.h"
> +
> +#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
> +
> +enum {
> + P_XO,
> + P_GPLL0,
> + P_GPLL2,
> + P_GPLL4,
> + P_APSS_PLL_EARLY,
> + P_APSS_PLL
> +};
> +
> +static struct clk_alpha_pll apss_pll_early = {
> + .offset = 0x5000,
> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_APSS],
> + .clkr = {
> + .enable_reg = 0x5000,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "apss_pll_early",
> + .parent_data = &(const struct clk_parent_data) {
> + .fw_name = "xo", .name = "xo"
> + },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_huayra_ops,
> + },
> + },
> +};
> +
> +static struct clk_alpha_pll_postdiv apss_pll = {
> + .offset = 0x5000,
> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_APSS],
> + .width = 2,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "apss_pll",
> + .parent_hws = (const struct clk_hw *[]){
> + &apss_pll_early.clkr.hw },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_postdiv_ro_ops,
> + },
> +};
> +
> +static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
> + { .fw_name = "xo", .name = "xo" },
> + { .fw_name = "gpll0", .name = "gpll0" },
> + { .fw_name = "gpll2", .name = "gpll2" },
> + { .fw_name = "gpll4", .name = "gpll4" },
> + { .hw = &apss_pll.clkr.hw },
> + { .hw = &apss_pll_early.clkr.hw },
> +};
> +
> +static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
> + { P_XO, 0 },
> + { P_GPLL0, 4 },
> + { P_GPLL2, 2 },
> + { P_GPLL4, 1 },
> + { P_APSS_PLL, 3 },
> + { P_APSS_PLL_EARLY, 5 },
> +};
> +
> +struct freq_tbl ftbl_apcs_alias0_clk_src[] = {
> + F(19200000, P_XO, 1, 0, 0),
> + F(403200000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(806400000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(1017600000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(1382400000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(1651200000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(1843200000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(1920000000, P_APSS_PLL_EARLY, 1, 0, 0),
> + F(2208000000UL, P_APSS_PLL_EARLY, 1, 0, 0),
> + { }
> +};
> +
> +struct clk_rcg2 apcs_alias0_clk_src = {
> + .cmd_rcgr = 0x0050,
> + .freq_tbl = ftbl_apcs_alias0_clk_src,
> + .hid_width = 5,
> + .parent_map = parents_apcs_alias0_clk_src_map,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "apcs_alias0_clk_src",
> + .parent_data = parents_apcs_alias0_clk_src,
> + .num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src),
> + .ops = &clk_rcg2_ops,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_branch apcs_alias0_core_clk = {
> + .halt_reg = 0x0058,
> + .halt_bit = 31,
> + .clkr = {
> + .enable_reg = 0x0058,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "apcs_alias0_core_clk",
> + .parent_hws = (const struct clk_hw *[]){
> + &apcs_alias0_clk_src.clkr.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT |
> + CLK_IS_CRITICAL,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_regmap *apss_ipq8074_clks[] = {
> + [APSS_PLL_EARLY] = &apss_pll_early.clkr,
> + [APSS_PLL] = &apss_pll.clkr,
> + [APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr,
> + [APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr,
> +};
> +
> +static const struct regmap_config apss_ipq8074_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x5ffc,
> + .fast_io = true,
> +};
> +
> +static const struct qcom_cc_desc apss_ipq8074_desc = {
> + .config = &apss_ipq8074_regmap_config,
> + .clks = apss_ipq8074_clks,
> + .num_clks = ARRAY_SIZE(apss_ipq8074_clks),
> +};
> +
> +static int apss_ipq8074_probe(struct platform_device *pdev)
> +{
> + struct regmap *regmap;
> +
> + regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!regmap)
> + return -ENODEV;
> +
> + return qcom_cc_really_probe(pdev, &apss_ipq8074_desc, regmap);
> +}
> +
> +static struct platform_driver apss_ipq8074_driver = {
> + .probe = apss_ipq8074_probe,
> + .driver = {
> + .name = "qcom,apss-ipq8074-clk",
As pointed out by Krzysztof, this shouldn't have a ',' in there and if
you look at msm8916 it uses "qcom-apcs-msm8916-clk", so please follow
that.
I don't know if you intend to actually build this as a module, but if
so, wouldn't you also need
MODULE_ALIAS("platform:qcom-apss-ipq8074-clk"); to make module loading
pick this thing up?
Regards,
Bjorn
> + },
> +};
> +
> +module_platform_driver(apss_ipq8074_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm IPQ8074 APSS clock driver");
> +MODULE_LICENSE("GPL");
> --
> 2.36.1
>
next prev parent reply other threads:[~2022-06-30 23:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-15 20:45 [PATCH v4 1/6] clk: qcom: clk-alpha-pll: add support for APSS PLL Robert Marko
2022-05-15 20:45 ` [PATCH v4 2/6] dt-bindings: clock: Add support for IPQ8074 APSS clock controller Robert Marko
2022-05-15 20:45 ` [PATCH v4 3/6] clk: qcom: Add " Robert Marko
2022-05-17 8:14 ` Krzysztof Kozlowski
2022-06-30 23:03 ` Bjorn Andersson [this message]
2022-07-04 12:14 ` Robert Marko
2022-05-15 20:45 ` [PATCH v4 4/6] mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock controller support Robert Marko
2022-06-30 22:59 ` Bjorn Andersson
2022-07-04 19:20 ` Robert Marko
2022-05-15 20:45 ` [PATCH v4 5/6] dt-bindings: mailbox: qcom: set correct #clock-cells Robert Marko
2022-05-15 20:45 ` [PATCH v4 6/6] arm64: dts: ipq8074: add APCS node Robert Marko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yr4rte8Va+TgG9CM@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=ansuelsmth@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=robimarko@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.