All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Sean Wang <sean.wang@kernel.org>
Cc: "Sean Wang (王志亘)" <sean.wang@mediatek.com>,
	"Felix Fietkau" <nbd@nbd.name>,
	lorenzo.bianconi@redhat.com, Soul.Huang@mediatek.com,
	YN.Chen@mediatek.com, Leon.Yen@mediatek.com,
	Eric-SY.Chang@mediatek.com, "Deren Wu" <Deren.Wu@mediatek.com>,
	km.lin@mediatek.com, jenhao.yang@mediatek.com,
	robin.chiu@mediatek.com, Eddie.Chen@mediatek.com,
	ch.yeh@mediatek.com, posh.sun@mediatek.com,
	ted.huang@mediatek.com, Stella.Chang@mediatek.com,
	Tom.Chou@mediatek.com, steve.lee@mediatek.com, jsiuda@google.com,
	frankgor@google.com, kuabhs@google.com, druth@google.com,
	abhishekpandit@google.com, shawnku@google.com,
	linux-wireless@vger.kernel.org,
	"moderated list:ARM/Mediatek SoC support"
	<linux-mediatek@lists.infradead.org>
Subject: Re: [PATCH 9/9] wifi: mt76: mt7921: introduce chanctx support
Date: Thu, 18 Aug 2022 09:43:01 +0200	[thread overview]
Message-ID: <Yv3thcH2phpCD+3N@lore-desk> (raw)
In-Reply-To: <CAGp9LzqecHa4DzAcugth4EOua8n-tPnS4TmgijETMxkT7fn8gQ@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 13130 bytes --]

> On Wed, Aug 17, 2022 at 12:42 AM Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> >
> > > From: Sean Wang <sean.wang@mediatek.com>
> > >
> > > The firmware can have the capability to manage the channel context
> > > scheduling on multiple roles running on the device including Station,
> > > AP and P2P GC/GO mode (will be extended based on the patchset) to help
> > > users sharing the network with others on a single device.
> > >
> > > The firmware is able to support the channel chanctx up to 2 interface
> > > simultaneously running on the different channels.
> > >
> > > Another thing to be noted is that before the driver is going sent out the
> > > management frames, the driver has to get the privilege from the firmware
> > > to occupy the current channel context until the frame handshake is
> > > completed and then get the privilege back to the firmware.
> > >
> > > We temporarily disable the feature with a module parameter
> > > mt7921_disable_cnm for a while until we can ensure the patchset doesn't
> > > cause any regression.
> > >
> > > Co-developed-by: Deren Wu <deren.wu@mediatek.com>
> > > Signed-off-by: Deren Wu <deren.wu@mediatek.com>
> > > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > > ---
> > >  .../net/wireless/mediatek/mt76/mt7921/init.c  |  40 ++++++-
> > >  .../net/wireless/mediatek/mt76/mt7921/main.c  | 111 +++++++++++++++++-
> > >  .../wireless/mediatek/mt76/mt7921/mt7921.h    |   1 +
> > >  3 files changed, 145 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > index 1b7a18d42f5b..208a6117cb69 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > @@ -7,6 +7,10 @@
> > >  #include "mcu.h"
> > >  #include "eeprom.h"
> > >
> > > +static bool mt7921_disable_cnm = true;
> > > +module_param_named(disable_cnm, mt7921_disable_cnm, bool, 0644);
> > > +MODULE_PARM_DESC(disable_cnm, "disable concurrent network support");
> >
> > do we need it? I guess we can just leave it enabled by default and disable it
> > through a debugfs node. What do you think?
> 
> The kernel parameter would be checked before registering ops to
> mac80211, it seemed to me the way debugfs node doesn't work for that
> moment.

I am wondering if it is ok to just enable it by default, what do you t think?
It is not a good practise to add a lot of module parameters.

Regards,
Lorenzo

> 
> >
> > > +
> > >  static const struct ieee80211_iface_limit if_limits[] = {
> > >       {
> > >               .max = MT7921_MAX_INTERFACES,
> > > @@ -25,6 +29,27 @@ static const struct ieee80211_iface_combination if_comb[] = {
> > >               .max_interfaces = MT7921_MAX_INTERFACES,
> > >               .num_different_channels = 1,
> > >               .beacon_int_infra_match = true,
> > > +     },
> > > +};
> > > +
> > > +static const struct ieee80211_iface_limit if_limits_chanctx[] = {
> > > +     {
> > > +             .max = 2,
> > > +             .types = BIT(NL80211_IFTYPE_STATION),
> > > +     },
> > > +     {
> > > +             .max = 1,
> > > +             .types = BIT(NL80211_IFTYPE_AP),
> > > +     }
> > > +};
> > > +
> > > +static const struct ieee80211_iface_combination if_comb_chanctx[] = {
> > > +     {
> > > +             .limits = if_limits_chanctx,
> > > +             .n_limits = ARRAY_SIZE(if_limits_chanctx),
> > > +             .max_interfaces = 2,
> > > +             .num_different_channels = 2,
> > > +             .beacon_int_infra_match = false,
> > >       }
> > >  };
> > >
> > > @@ -63,11 +88,20 @@ static int mt7921_check_offload_capability(struct mt7921_dev *dev)
> > >       fw_can_roc =  mktime64(year, mon, day, hour, min, sec) >=
> > >                     mktime64(2022, 7, 15, 12, 1, 1);
> > >  out:
> > > -     if (!fw_can_roc) {
> > > +     if (!fw_can_roc || mt7921_disable_cnm) {
> > >               dev->ops->remain_on_channel = NULL;
> > >               dev->ops->cancel_remain_on_channel = NULL;
> > > +             dev->ops->add_chanctx = NULL;
> > > +             dev->ops->remove_chanctx = NULL;
> > > +             dev->ops->change_chanctx = NULL;
> > > +             dev->ops->assign_vif_chanctx = NULL;
> > > +             dev->ops->unassign_vif_chanctx = NULL;
> > > +             dev->ops->mgd_prepare_tx = NULL;
> > > +             dev->ops->mgd_complete_tx = NULL;
> > >
> > >               wiphy->flags &= ~WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
> > > +             wiphy->iface_combinations = if_comb;
> > > +             wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
> > >       }
> > >
> > >       return 0;
> > > @@ -93,12 +127,12 @@ mt7921_init_wiphy(struct ieee80211_hw *hw)
> > >       hw->sta_data_size = sizeof(struct mt7921_sta);
> > >       hw->vif_data_size = sizeof(struct mt7921_vif);
> > >
> > > -     wiphy->iface_combinations = if_comb;
> > > +     wiphy->iface_combinations = if_comb_chanctx;
> > >       wiphy->flags &= ~(WIPHY_FLAG_IBSS_RSN | WIPHY_FLAG_4ADDR_AP |
> > >                         WIPHY_FLAG_4ADDR_STATION);
> > >       wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
> > >                                BIT(NL80211_IFTYPE_AP);
> > > -     wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
> > > +     wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_chanctx);
> > >       wiphy->max_remain_on_channel_duration = 5000;
> > >       wiphy->max_scan_ie_len = MT76_CONNAC_SCAN_IE_LEN;
> > >       wiphy->max_scan_ssids = 4;
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > index ae0aabe052e3..6386290ba71c 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > @@ -858,7 +858,7 @@ void mt7921_mac_sta_assoc(struct mt76_dev *mdev, struct ieee80211_vif *vif,
> > >
> > >       if (vif->type == NL80211_IFTYPE_STATION && !sta->tdls)
> > >               mt76_connac_mcu_uni_add_bss(&dev->mphy, vif, &mvif->sta.wcid,
> > > -                                         true, NULL);
> > > +                                         true, mvif->ctx);
> > >
> > >       mt7921_mac_wtbl_update(dev, msta->wcid.idx,
> > >                              MT_WTBL_UPDATE_ADM_COUNT_CLEAR);
> > > @@ -890,7 +890,7 @@ void mt7921_mac_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
> > >               if (!sta->tdls)
> > >                       mt76_connac_mcu_uni_add_bss(&dev->mphy, vif,
> > >                                                   &mvif->sta.wcid, false,
> > > -                                                 NULL);
> > > +                                                 mvif->ctx);
> > >       }
> > >
> > >       spin_lock_bh(&dev->sta_poll_lock);
> > > @@ -1640,7 +1640,7 @@ mt7921_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> > >       mt7921_mutex_acquire(dev);
> > >
> > >       err = mt76_connac_mcu_uni_add_bss(phy->mt76, vif, &mvif->sta.wcid,
> > > -                                       true, NULL);
> > > +                                       true, mvif->ctx);
> > >       if (err)
> > >               goto failed;
> > >
> > > @@ -1672,12 +1672,108 @@ mt7921_stop_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> > >               goto failed;
> > >
> > >       mt76_connac_mcu_uni_add_bss(phy->mt76, vif, &mvif->sta.wcid, false,
> > > -                                 NULL);
> > > +                                 mvif->ctx);
> > >
> > >  failed:
> > >       mt7921_mutex_release(dev);
> > >  }
> > >
> > > +static int
> > > +mt7921_add_chanctx(struct ieee80211_hw *hw,
> > > +                struct ieee80211_chanctx_conf *ctx)
> > > +{
> > > +     return 0;
> > > +}
> > > +
> > > +static void
> > > +mt7921_remove_chanctx(struct ieee80211_hw *hw,
> > > +                   struct ieee80211_chanctx_conf *ctx)
> > > +{
> > > +}
> > > +
> > > +static void mt7921_ctx_iter(void *priv, u8 *mac,
> > > +                         struct ieee80211_vif *vif)
> > > +{
> > > +     struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> > > +     struct ieee80211_chanctx_conf *ctx = priv;
> > > +
> > > +     if (ctx != mvif->ctx)
> > > +             return;
> > > +
> > > +     mt76_connac_mcu_uni_set_chctx(mvif->phy->mt76, &mvif->mt76, ctx);
> > > +}
> > > +
> > > +static void
> > > +mt7921_change_chanctx(struct ieee80211_hw *hw,
> > > +                   struct ieee80211_chanctx_conf *ctx,
> > > +                   u32 changed)
> > > +{
> > > +     struct mt7921_phy *phy = mt7921_hw_phy(hw);
> > > +
> > > +     mt7921_mutex_acquire(phy->dev);
> > > +     ieee80211_iterate_active_interfaces(phy->mt76->hw,
> > > +                                         IEEE80211_IFACE_ITER_ACTIVE,
> > > +                                         mt7921_ctx_iter, ctx);
> > > +     mt7921_mutex_release(phy->dev);
> > > +}
> > > +
> > > +static int
> > > +mt7921_assign_vif_chanctx(struct ieee80211_hw *hw,
> > > +                       struct ieee80211_vif *vif,
> > > +                       struct ieee80211_bss_conf *link_conf,
> > > +                       struct ieee80211_chanctx_conf *ctx)
> > > +{
> > > +     struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> > > +     struct mt7921_dev *dev = mt7921_hw_dev(hw);
> > > +
> > > +     mt7921_mutex_acquire(dev);
> >
> > I think in this case we can just grub the mutex without waking up the device.
> > what do you think?
> 
> ack
> 
> >
> > > +     mvif->ctx = ctx;
> > > +     mt7921_mutex_release(dev);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > > +static void
> > > +mt7921_unassign_vif_chanctx(struct ieee80211_hw *hw,
> > > +                         struct ieee80211_vif *vif,
> > > +                         struct ieee80211_bss_conf *link_conf,
> > > +                         struct ieee80211_chanctx_conf *ctx)
> > > +{
> > > +     struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> > > +     struct mt7921_dev *dev = mt7921_hw_dev(hw);
> > > +
> > > +     mt7921_mutex_acquire(dev);
> >
> > same here.
> 
> ack
> 
> >
> > Regards,
> > Lorenzo
> >
> > > +     mvif->ctx = NULL;
> > > +     mt7921_mutex_release(dev);
> > > +}
> > > +
> > > +static void mt7921_mgd_prepare_tx(struct ieee80211_hw *hw,
> > > +                               struct ieee80211_vif *vif,
> > > +                               struct ieee80211_prep_tx_info *info)
> > > +{
> > > +     struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> > > +     struct mt7921_dev *dev = mt7921_hw_dev(hw);
> > > +     u16 duration = info->duration ? info->duration :
> > > +                    jiffies_to_msecs(HZ);
> > > +
> > > +     mt7921_mutex_acquire(dev);
> > > +     mt7921_set_roc(mvif->phy, mvif, mvif->ctx->def.chan, duration,
> > > +                    MT7921_ROC_REQ_JOIN);
> > > +     mt7921_mutex_release(dev);
> > > +}
> > > +
> > > +static void mt7921_mgd_complete_tx(struct ieee80211_hw *hw,
> > > +                                struct ieee80211_vif *vif,
> > > +                                struct ieee80211_prep_tx_info *info)
> > > +{
> > > +     struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> > > +     struct mt7921_dev *dev = mt7921_hw_dev(hw);
> > > +
> > > +     mt7921_mutex_acquire(dev);
> > > +     mt7921_abort_roc(mvif->phy, mvif);
> > > +     mt7921_mutex_release(dev);
> > > +}
> > > +
> > >  const struct ieee80211_ops mt7921_ops = {
> > >       .tx = mt7921_tx,
> > >       .start = mt7921_start,
> > > @@ -1730,6 +1826,13 @@ const struct ieee80211_ops mt7921_ops = {
> > >       .set_sar_specs = mt7921_set_sar_specs,
> > >       .remain_on_channel = mt7921_remain_on_channel,
> > >       .cancel_remain_on_channel = mt7921_cancel_remain_on_channel,
> > > +     .add_chanctx = mt7921_add_chanctx,
> > > +     .remove_chanctx = mt7921_remove_chanctx,
> > > +     .change_chanctx = mt7921_change_chanctx,
> > > +     .assign_vif_chanctx = mt7921_assign_vif_chanctx,
> > > +     .unassign_vif_chanctx = mt7921_unassign_vif_chanctx,
> > > +     .mgd_prepare_tx = mt7921_mgd_prepare_tx,
> > > +     .mgd_complete_tx = mt7921_mgd_complete_tx,
> > >  };
> > >  EXPORT_SYMBOL_GPL(mt7921_ops);
> > >
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> > > index 280605ffc4da..fda85252325c 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> > > @@ -156,6 +156,7 @@ struct mt7921_vif {
> > >       struct ewma_rssi rssi;
> > >
> > >       struct ieee80211_tx_queue_params queue_params[IEEE80211_NUM_ACS];
> > > +     struct ieee80211_chanctx_conf *ctx;
> > >  };
> > >
> > >  struct mib_stats {
> > > --
> > > 2.25.1
> > >

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply	other threads:[~2022-08-18  7:43 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-16  0:03 [PATCH 0/9] wifi: mt76: mt7921: introduce chanctx support sean.wang
2022-08-16  0:03 ` [PATCH 1/9] wifi: mac80211: allow enabling chanctx until hw registration sean.wang
2022-08-16  8:03   ` Johannes Berg
2022-08-17  8:28     ` Sean Wang
2022-08-17  8:30       ` Johannes Berg
2022-08-18  0:11         ` Sean Wang
2022-08-18 10:49           ` Johannes Berg
2022-08-18 23:40             ` Sean Wang
2022-08-19 17:16               ` Johannes Berg
2022-08-19 17:36                 ` Johannes Berg
2022-08-16  0:03 ` [PATCH 2/9] wifi: mt76: connac: add mt76_connac_mcu_uni_set_chctx sean.wang
2022-08-17  7:13   ` Lorenzo Bianconi
2022-08-16  0:03 ` [PATCH 3/9] wifi: mt76: connac: rely on mt76_connac_mcu_uni_set_chctx sean.wang
2022-08-17  7:13   ` Lorenzo Bianconi
2022-08-16  0:03 ` [PATCH 4/9] wifi: mt76: mt7921: add chanctx parameter to mt76_connac_mcu_uni_add_bss signature sean.wang
2022-08-16  0:03 ` [PATCH 5/9] wifi: mt76: mt7921: add unified ROC cmd/event support sean.wang
2022-08-17  7:15   ` Lorenzo Bianconi
2022-08-16  0:03 ` [PATCH 6/9] wifi: mt76: mt7921: drop ieee80211_[start, stop]_queues in driver sean.wang
2022-08-17  7:16   ` Lorenzo Bianconi
2022-08-18  0:44     ` Sean Wang
2022-08-16  0:03 ` [PATCH 7/9] wifi: mt76: connac: accept hw scan request at a time sean.wang
2022-08-16  0:03 ` [PATCH 8/9] wifi: mt76: mt7921: introduce remain_on_channel support sean.wang
2022-08-17  7:12   ` Lorenzo Bianconi
2022-08-18  1:03     ` Sean Wang
2022-08-18  7:39       ` Lorenzo Bianconi
2022-08-25  0:10         ` Sean Wang
2022-08-30  5:18           ` Kalle Valo
2022-08-16  0:03 ` [PATCH 9/9] wifi: mt76: mt7921: introduce chanctx support sean.wang
2022-08-17  7:24   ` Lorenzo Bianconi
2022-08-18  0:37     ` Sean Wang
2022-08-18  7:43       ` Lorenzo Bianconi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yv3thcH2phpCD+3N@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=Deren.Wu@mediatek.com \
    --cc=Eddie.Chen@mediatek.com \
    --cc=Eric-SY.Chang@mediatek.com \
    --cc=Leon.Yen@mediatek.com \
    --cc=Soul.Huang@mediatek.com \
    --cc=Stella.Chang@mediatek.com \
    --cc=Tom.Chou@mediatek.com \
    --cc=YN.Chen@mediatek.com \
    --cc=abhishekpandit@google.com \
    --cc=ch.yeh@mediatek.com \
    --cc=druth@google.com \
    --cc=frankgor@google.com \
    --cc=jenhao.yang@mediatek.com \
    --cc=jsiuda@google.com \
    --cc=km.lin@mediatek.com \
    --cc=kuabhs@google.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=nbd@nbd.name \
    --cc=posh.sun@mediatek.com \
    --cc=robin.chiu@mediatek.com \
    --cc=sean.wang@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=shawnku@google.com \
    --cc=steve.lee@mediatek.com \
    --cc=ted.huang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.