From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 6.0
Date: Fri, 12 Aug 2022 17:44:51 +0200 [thread overview]
Message-ID: <YvZ1cz2TBIuyZ0md@mail.local> (raw)
Hello Linus,
Here is the RTC subsystem pull request for 6.0. There is a know add/add
merge conflict in MAINTAINERS that is easy to solve.
Three new drivers this cycle are making the bulk of the changes.
The following changes since commit f2906aa863381afb0015a9eb7fefad885d4e5a56:
Linux 5.19-rc1 (2022-06-05 17:18:54 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-6.0
for you to fetch changes up to 03c4cd6f89e074a51e289eb9129ac646f0f2bd29:
rtc: spear: set range max (2022-08-09 00:56:41 +0200)
----------------------------------------------------------------
RTC for 6.0
New drivers:
- Microchip PolarFire
- Nuvoton NCT3018Y
- TI K3 RTC
Subsystem:
- Replace flush_scheduled_work() with flush_work()
- Remove deprecated ida_simple_get()/ida_simple_remove() calls
Drivers:
- use simple i2c probe where possible
- sun6i: add R329 support
- zynqmp: add calibration support
- vr41xx: remove unused driver
----------------------------------------------------------------
Ahmad Fatoum (3):
rtc: rv8803: factor out existing register initialization to function
rtc: rv8803: initialize registers on post-probe voltage loss
rtc: rv8803: re-initialize all Epson RX8803 registers on voltage loss
Alexander Stein (1):
dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
Alexandre Belloni (1):
rtc: zynqmp: initialize fract_tick
Allen-KH Cheng (1):
dt-bindings: rtc: mediatek: add mt6358 and mt6366 compatible
Conor Dooley (2):
rtc: Add driver for Microchip PolarFire SoC
MAINTAINERS: add PolarFire SoC's RTC
Icenowy Zheng (1):
rtc: sun6i: add support for R329 RTC
Mateusz Jończyk (1):
rtc: mc146818-lib: reduce RTC_UIP polling period
Mathew McBride (1):
rtc: rx8025: fix 12/24 hour mode detection on RX-8035
Mia Lin (2):
dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
rtc: Add NCT3018Y real time clock driver
Nishanth Menon (2):
dt-bindings: rtc: Add TI K3 RTC description
rtc: Introduce ti-k3-rtc
Quentin Schulz (1):
rtc: isl1208: do not advertise update interrupt feature if no interrupt specified
Rafael J. Wysocki (1):
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
Rob Herring (1):
dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
Satya Priya (1):
dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
Srinivas Neeli (3):
dt-bindings: rtc: zynqmp: Add clock information
rtc: zynqmp: Updated calibration value
rtc: zynqmp: Add calibration set and get support
Stephen Kitt (1):
rtc: use simple i2c probe
Tetsuo Handa (2):
rtc: Replace flush_scheduled_work() with flush_work().
rtc: Remove unused rtc_dev_exit().
Thomas Bogendoerfer (1):
rtc: vr41xx: remove driver
Tom Rix (1):
rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
Uwe Kleine-König (1):
rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
Yang Yingliang (1):
rtc: rv8803: fix missing unlock on error in rv8803_set_time()
Zeng Jingxiang (1):
rtc: spear: set range max
keliu (1):
rtc: Directly use ida_alloc()/free()
.../bindings/rtc/microcrystal,rv3032.yaml | 1 +
.../devicetree/bindings/rtc/nuvoton,nct3018y.yaml | 45 ++
.../devicetree/bindings/rtc/nxp,pcf85063.txt | 32 -
.../devicetree/bindings/rtc/nxp,pcf85063.yaml | 92 +++
.../devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml | 2 +-
.../devicetree/bindings/rtc/rtc-mt6397.txt | 2 +
.../devicetree/bindings/rtc/ti,k3-rtc.yaml | 62 ++
.../devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml | 12 +-
MAINTAINERS | 3 +
drivers/rtc/Kconfig | 41 +-
drivers/rtc/Makefile | 4 +-
drivers/rtc/class.c | 6 +-
drivers/rtc/dev.c | 8 +-
drivers/rtc/rtc-ab-b5ze-s3.c | 5 +-
drivers/rtc/rtc-ab-eoz9.c | 5 +-
drivers/rtc/rtc-bq32k.c | 5 +-
drivers/rtc/rtc-cmos.c | 3 -
drivers/rtc/rtc-core.h | 5 -
drivers/rtc/rtc-cros-ec.c | 4 +-
drivers/rtc/rtc-ds1374.c | 5 +-
drivers/rtc/rtc-ds1672.c | 5 +-
drivers/rtc/rtc-ds3232.c | 5 +-
drivers/rtc/rtc-em3027.c | 5 +-
drivers/rtc/rtc-fm3130.c | 5 +-
drivers/rtc/rtc-hym8563.c | 5 +-
drivers/rtc/rtc-isl12022.c | 5 +-
drivers/rtc/rtc-isl1208.c | 10 +-
drivers/rtc/rtc-max6900.c | 5 +-
drivers/rtc/rtc-mc146818-lib.c | 8 +-
drivers/rtc/rtc-mpfs.c | 323 ++++++++++
drivers/rtc/rtc-nct3018y.c | 553 +++++++++++++++++
drivers/rtc/rtc-pcf8523.c | 5 +-
drivers/rtc/rtc-pcf85363.c | 5 +-
drivers/rtc/rtc-pcf8563.c | 5 +-
drivers/rtc/rtc-pcf8583.c | 5 +-
drivers/rtc/rtc-rv3029c2.c | 5 +-
drivers/rtc/rtc-rv8803.c | 98 ++-
drivers/rtc/rtc-rx6110.c | 5 +-
drivers/rtc/rtc-rx8025.c | 22 +-
drivers/rtc/rtc-rx8581.c | 5 +-
drivers/rtc/rtc-s35390a.c | 5 +-
drivers/rtc/rtc-sd3078.c | 5 +-
drivers/rtc/rtc-spear.c | 2 +-
drivers/rtc/rtc-sun6i.c | 2 +
drivers/rtc/rtc-ti-k3.c | 680 +++++++++++++++++++++
drivers/rtc/rtc-vr41xx.c | 363 -----------
drivers/rtc/rtc-x1205.c | 5 +-
drivers/rtc/rtc-zynqmp.c | 115 +++-
48 files changed, 2063 insertions(+), 540 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
create mode 100644 drivers/rtc/rtc-mpfs.c
create mode 100644 drivers/rtc/rtc-nct3018y.c
create mode 100644 drivers/rtc/rtc-ti-k3.c
delete mode 100644 drivers/rtc/rtc-vr41xx.c
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next reply other threads:[~2022-08-12 15:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-12 15:44 Alexandre Belloni [this message]
2022-08-13 1:26 ` [GIT PULL] RTC for 6.0 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YvZ1cz2TBIuyZ0md@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.