All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: Reinette Chatre <reinette.chatre@intel.com>
Cc: linux-sgx@vger.kernel.org,
	Haitao Huang <haitao.huang@linux.intel.com>,
	Vijay Dhanraj <vijay.dhanraj@intel.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Paul Menzel <pmenzel@molgen.mpg.de>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)"
	<x86@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
	"open list:X86 ARCHITECTURE (32-BIT AND 64-BIT)" 
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/6] x86/sgx: Do not consider unsanitized pages an error
Date: Wed, 31 Aug 2022 04:55:21 +0300	[thread overview]
Message-ID: <Yw6/iTzSdSw/Y/VO@kernel.org> (raw)
In-Reply-To: <1f43e7b9-c101-3872-bd1b-add66933b285@intel.com>

On Tue, Aug 30, 2022 at 03:54:27PM -0700, Reinette Chatre wrote:
> Hi Jarkko,
> 
> On 8/29/2022 8:12 PM, Jarkko Sakkinen wrote:
> > In sgx_init(), if misc_register() for the provision device fails, and
> > neither sgx_drv_init() nor sgx_vepc_init() succeeds, then ksgxd will be
> > prematurely stopped.
> 
> I do not think misc_register() is required to fail for the scenario to
> be triggered (rather use "or" than "and"?). Perhaps just
> "In sgx_init(), if a failure is encountered after ksgxd is started
> (via sgx_page_reclaimer_init()) ...".

This would be the fixed version of the sentence:

"
In sgx_init(), if misc_register() fails or misc_register() succeeds but
neither sgx_drv_init() nor sgx_vepc_init() succeeds, then ksgxd will be
prematurely stopped. This may leave some unsanitized pages, which does
not matter, because SGX will be disabled for the whole power cycle.
"

I want to keep the end states listed and not make it more abstract.

The second sentence addresses the remark below.

> To help the reader understand the subject of this patch it may help
> to explain that prematurely stopping ksgxd may leave some
> unsanitized pages, but that is not a problem since SGX cannot
> be used on the platform anyway. 
> 
> > This triggers WARN_ON() because sgx_dirty_page_list ends up being
> > non-empty, and dumps the call stack:
> > 
> 
> Traces like below can be frowned upon. I recommend that you follow the
> guidance in "Backtraces in commit mesages"(sic) in 
> Documentation/process/submitting-patches.rst.
> 
> > [    0.268592] WARNING: CPU: 6 PID: 83 at
> > arch/x86/kernel/cpu/sgx/main.c:401 ksgxd+0x1b7/0x1d0

Is this good enough? I had not actually spotted this section before but
nice that it exists. Apparently has been added in 5.12.

>> > 
> > Ultimately this can crash the kernel, if the following is set:
> > 
> > 	/proc/sys/kernel/panic_on_warn
> > 
> > Print a simple warning instead, and improve the output by printing the
> > number of unsanitized pages, in order to provide debug informnation for
> > future needs.
> 
> informnation -> information

+1

> 
>  
> ...
> 
> > Link: https://lore.kernel.org/linux-sgx/20220825051827.246698-1-jarkko@kernel.org/T/#u
> > Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
> > Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
> > Fixes: 51ab30eb2ad4 ("x86/sgx: Replace section->init_laundry_list with sgx_dirty_page_list")
> > Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
> 
> Should this go to stable?

I guess it should. The hard reason for this that it can panic
the kernel.

> 
> > 
> > diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c
> > index 515e2a5f25bb..903100fcfce3 100644
> > --- a/arch/x86/kernel/cpu/sgx/main.c
> > +++ b/arch/x86/kernel/cpu/sgx/main.c
> > @@ -49,17 +49,20 @@ static LIST_HEAD(sgx_dirty_page_list);
> >   * Reset post-kexec EPC pages to the uninitialized state. The pages are removed
> >   * from the input list, and made available for the page allocator. SECS pages
> >   * prepending their children in the input list are left intact.
> > + *
> > + * Contents of the @dirty_page_list must be thread-local, i.e.
> > + * not shared by multiple threads.
> 
> Did you intend to mention something about the needed locking here? It looks
> like some information is lost during the move to the function description.

Nothing about the locking that concerns the parameter, as the
sentence defines clear constraints for the caller.

> 
> >   */
> > -static void __sgx_sanitize_pages(struct list_head *dirty_page_list)
> > +static int __sgx_sanitize_pages(struct list_head *dirty_page_list)
> >  {
> >  	struct sgx_epc_page *page;
> > +	int left_dirty = 0;
> 
> I do not know how many pages this code should be ready for but at least
> this could handle more by being an unsigned int considering that it is
> always positive ... maybe even unsigned long?

I would go for 'long'. More information below.

> 
> >  	LIST_HEAD(dirty);
> >  	int ret;
> >  
> > -	/* dirty_page_list is thread-local, no need for a lock: */
> >  	while (!list_empty(dirty_page_list)) {
> >  		if (kthread_should_stop())
> > -			return;
> > +			break;
> >  
> >  		page = list_first_entry(dirty_page_list, struct sgx_epc_page, list);
> >  
> > @@ -92,12 +95,14 @@ static void __sgx_sanitize_pages(struct list_head *dirty_page_list)
> >  		} else {
> >  			/* The page is not yet clean - move to the dirty list. */
> >  			list_move_tail(&page->list, &dirty);
> > +			left_dirty++;
> >  		}
> >  
> >  		cond_resched();
> >  	}
> >  
> >  	list_splice(&dirty, dirty_page_list);
> > +	return left_dirty;
> >  }
> >  
> >  static bool sgx_reclaimer_age(struct sgx_epc_page *epc_page)
> > @@ -388,6 +393,8 @@ void sgx_reclaim_direct(void)
> >  
> >  static int ksgxd(void *p)
> >  {
> > +	int left_dirty;
> > +
> >  	set_freezable();
> >  
> >  	/*
> > @@ -395,10 +402,10 @@ static int ksgxd(void *p)
> >  	 * required for SECS pages, whose child pages blocked EREMOVE.
> >  	 */
> >  	__sgx_sanitize_pages(&sgx_dirty_page_list);
> > -	__sgx_sanitize_pages(&sgx_dirty_page_list);
> >  
> > -	/* sanity check: */
> > -	WARN_ON(!list_empty(&sgx_dirty_page_list));
> > +	left_dirty = __sgx_sanitize_pages(&sgx_dirty_page_list);
> > +	if (left_dirty)
> > +		pr_warn("%d unsanitized pages\n", left_dirty);
> >  
> >  	while (!kthread_should_stop()) {
> >  		if (try_to_freeze())
> 
> 
> Reinette

We need to return -ECANCELED on premature stop, and number of
pages otherwise.

In premature stop, nothing should be printed, as the number
is by practical means a random number. Otherwise, it is an
indicator of a bug in the driver, and therefore a non-zero
number should be printed pr_err(), if that happens after the
second call.

Thanks for feedback.

BR, Jarkko

  parent reply	other threads:[~2022-08-31  1:55 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-30  3:12 [PATCH 0/6] x86/sgx: Test and fixes Jarkko Sakkinen
2022-08-30  3:12 ` [PATCH 1/6] x86/sgx: Do not consider unsanitized pages an error Jarkko Sakkinen
2022-08-30 22:54   ` Reinette Chatre
2022-08-31  1:27     ` Huang, Kai
2022-08-31  2:15       ` jarkko
2022-08-31  2:35         ` Huang, Kai
2022-08-31  2:44           ` jarkko
2022-08-31  2:55             ` Huang, Kai
2022-08-31  2:57               ` jarkko
2022-08-31  3:10                 ` Jarkko Sakkinen
2022-08-31  3:28                   ` Huang, Kai
2022-08-31  3:40                     ` jarkko
2022-08-31  3:17                 ` Huang, Kai
2022-08-31 15:18                   ` Haitao Huang
2022-08-31 18:28                     ` jarkko
2022-08-31 18:35                       ` Dave Hansen
2022-08-31 18:44                         ` jarkko
2022-08-31 18:45                         ` jarkko
2022-08-31 20:42                         ` Huang, Kai
2022-09-01 22:27                           ` jarkko
2022-09-01 22:41                             ` Huang, Kai
2022-09-01 23:58                               ` jarkko
2022-09-02  0:26                                 ` Huang, Kai
2022-08-31  1:55     ` Jarkko Sakkinen [this message]
2022-08-31  1:58       ` Jarkko Sakkinen
2022-08-31  2:01         ` Jarkko Sakkinen
2022-08-31 18:08       ` Reinette Chatre
2022-08-30  3:12 ` [PATCH 2/6] x86/sgx: Handle VA page allocation failure for EAUG on PF Jarkko Sakkinen
2022-08-30 22:54   ` Reinette Chatre
2022-08-30  3:12 ` [PATCH 3/6] selftests/sgx: Ignore OpenSSL 3.0 deprecated functions warning Jarkko Sakkinen
2022-08-30 18:18   ` Reinette Chatre
2022-08-31  1:07     ` Jarkko Sakkinen
2022-08-30  3:12 ` [PATCH 4/6] selftests/sgx: Add SGX selftest augment_via_eaccept_long Jarkko Sakkinen
2022-08-30 22:55   ` Reinette Chatre
2022-08-31  2:28     ` Jarkko Sakkinen
2022-08-31 18:09       ` Reinette Chatre
2022-09-01 22:16         ` Jarkko Sakkinen
2022-09-01 23:11           ` Reinette Chatre
2022-09-02  0:00             ` Jarkko Sakkinen
2022-09-02  0:02               ` Jarkko Sakkinen
2022-08-30  3:12 ` [PATCH 5/6] selftests/sgx: retry the ioctls returned with EAGAIN Jarkko Sakkinen
2022-08-30 22:56   ` Reinette Chatre
2022-08-31  2:31     ` Jarkko Sakkinen
2022-08-31 18:09       ` Reinette Chatre
2022-09-01 22:17         ` Jarkko Sakkinen
2022-08-31 18:14       ` Dave Hansen
2022-09-01 22:18         ` Jarkko Sakkinen
2022-08-30  3:12 ` [PATCH 6/6] selftests/sgx: Add a bpftrace script for tracking allocation errors Jarkko Sakkinen
2022-08-30 22:57   ` Reinette Chatre
2022-08-31  2:33     ` Jarkko Sakkinen
2022-08-31 18:10       ` Reinette Chatre
2022-08-31 18:23         ` Jarkko Sakkinen
2022-08-31 18:23   ` Dave Hansen
2022-09-01 22:20     ` Jarkko Sakkinen
2022-09-01 22:34       ` Dave Hansen
2022-09-01 23:55         ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yw6/iTzSdSw/Y/VO@kernel.org \
    --to=jarkko@kernel.org \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=haitao.huang@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sgx@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=pmenzel@molgen.mpg.de \
    --cc=reinette.chatre@intel.com \
    --cc=tglx@linutronix.de \
    --cc=vijay.dhanraj@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.