All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suman Anna <s-anna@ti.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC/PATCH] remoteproc/keystone: switch to using gpiod API
Date: Tue, 6 Sep 2022 14:08:33 -0700	[thread overview]
Message-ID: <Yxe20ehiOnitDGus@google.com> (raw)

This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.

Note that there is a behavior change in the driver: previously the
driver did not actually request GPIO, it simply parsed GPIO number out
of device tree and poked at it.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/remoteproc/keystone_remoteproc.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index 594a9b43b7ae..95b39741925d 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -14,7 +14,7 @@
 #include <linux/workqueue.h>
 #include <linux/of_address.h>
 #include <linux/of_reserved_mem.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 #include <linux/remoteproc.h>
@@ -59,10 +59,10 @@ struct keystone_rproc {
 	int num_mems;
 	struct regmap *dev_ctrl;
 	struct reset_control *reset;
+	struct gpio_desc *kick_gpio;
 	u32 boot_offset;
 	int irq_ring;
 	int irq_fault;
-	int kick_gpio;
 	struct work_struct workqueue;
 };
 
@@ -232,10 +232,10 @@ static void keystone_rproc_kick(struct rproc *rproc, int vqid)
 {
 	struct keystone_rproc *ksproc = rproc->priv;
 
-	if (WARN_ON(ksproc->kick_gpio < 0))
+	if (!ksproc->kick_gpio)
 		return;
 
-	gpio_set_value(ksproc->kick_gpio, 1);
+	gpiod_set_value(ksproc->kick_gpio, 1);
 }
 
 /*
@@ -432,9 +432,9 @@ static int keystone_rproc_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
-	ksproc->kick_gpio = of_get_named_gpio_flags(np, "kick-gpios", 0, NULL);
-	if (ksproc->kick_gpio < 0) {
-		ret = ksproc->kick_gpio;
+	ksproc->kick_gpio = gpiod_get(dev, "kick", GPIOD_ASIS);
+	ret = PTR_ERR_OR_ZERO(ksproc->kick_gpio);
+	if (ret) {
 		dev_err(dev, "failed to get gpio for virtio kicks, status = %d\n",
 			ret);
 		goto disable_clk;
@@ -466,6 +466,7 @@ static int keystone_rproc_probe(struct platform_device *pdev)
 
 release_mem:
 	of_reserved_mem_device_release(dev);
+	gpiod_put(ksproc->kick_gpio);
 disable_clk:
 	pm_runtime_put_sync(dev);
 disable_rpm:
@@ -480,6 +481,7 @@ static int keystone_rproc_remove(struct platform_device *pdev)
 	struct keystone_rproc *ksproc = platform_get_drvdata(pdev);
 
 	rproc_del(ksproc->rproc);
+	gpiod_put(ksproc->kick_gpio);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	rproc_free(ksproc->rproc);
-- 
2.37.2.789.g6183377224-goog


-- 
Dmitry

             reply	other threads:[~2022-09-06 21:08 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-06 21:08 Dmitry Torokhov [this message]
2022-09-07 21:48 ` [RFC/PATCH] remoteproc/keystone: switch to using gpiod API Linus Walleij
2022-09-08 21:57 ` Mathieu Poirier
2022-09-19 20:09   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yxe20ehiOnitDGus@google.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=andersson@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=s-anna@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.