All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Mark Brown <broonie@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] spi: spi-mpc52xx: switch to using gpiod API
Date: Thu, 22 Sep 2022 21:51:37 -0700	[thread overview]
Message-ID: <Yy07WbMAG4bPgYNd@google.com> (raw)

This switches the driver to use gpiod API instead of legacy gpio API,
which will brings us close to removing of_get_gpio() and other
OF-specific old APIs.

No functional change intended beyond some differences in error messages.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/spi/spi-mpc52xx.c | 32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index 97cdd6545ee1..cb075c1acbee 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
@@ -18,7 +19,6 @@
 #include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/io.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -90,7 +90,7 @@ struct mpc52xx_spi {
 	const u8 *tx_buf;
 	int cs_change;
 	int gpio_cs_count;
-	unsigned int *gpio_cs;
+	struct gpio_desc **gpio_cs;
 };
 
 /*
@@ -102,9 +102,10 @@ static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value)
 
 	if (ms->gpio_cs_count > 0) {
 		cs = ms->message->spi->chip_select;
-		gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1);
-	} else
+		gpiod_set_value(ms->gpio_cs[cs], value);
+	} else {
 		out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
+	}
 }
 
 /*
@@ -386,10 +387,10 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 {
 	struct spi_master *master;
 	struct mpc52xx_spi *ms;
+	struct gpio_desc *gpio_cs;
 	void __iomem *regs;
 	u8 ctrl1;
 	int rc, i = 0;
-	int gpio_cs;
 
 	/* MMIO registers */
 	dev_dbg(&op->dev, "probing mpc5200 SPI device\n");
@@ -451,23 +452,16 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 		}
 
 		for (i = 0; i < ms->gpio_cs_count; i++) {
-			gpio_cs = of_get_gpio(op->dev.of_node, i);
-			if (!gpio_is_valid(gpio_cs)) {
-				dev_err(&op->dev,
-					"could not parse the gpio field in oftree\n");
-				rc = -ENODEV;
-				goto err_gpio;
-			}
-
-			rc = gpio_request(gpio_cs, dev_name(&op->dev));
+			gpio_cs = gpiod_get_index(&op->dev,
+						  NULL, i, GPIOD_OUT_LOW);
+			rc = PTR_ERR_OR_ZERO(gpio_cs);
 			if (rc) {
 				dev_err(&op->dev,
-					"can't request spi cs gpio #%d on gpio line %d\n",
-					i, gpio_cs);
+					"failed to get spi cs gpio #%d: %d\n",
+					i, rc);
 				goto err_gpio;
 			}
 
-			gpio_direction_output(gpio_cs, 1);
 			ms->gpio_cs[i] = gpio_cs;
 		}
 	}
@@ -508,7 +502,7 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 	dev_err(&ms->master->dev, "initialization failed\n");
  err_gpio:
 	while (i-- > 0)
-		gpio_free(ms->gpio_cs[i]);
+		gpiod_put(ms->gpio_cs[i]);
 
 	kfree(ms->gpio_cs);
  err_alloc_gpio:
@@ -529,7 +523,7 @@ static int mpc52xx_spi_remove(struct platform_device *op)
 	free_irq(ms->irq1, ms);
 
 	for (i = 0; i < ms->gpio_cs_count; i++)
-		gpio_free(ms->gpio_cs[i]);
+		gpiod_put(ms->gpio_cs[i]);
 
 	kfree(ms->gpio_cs);
 	spi_unregister_master(master);
-- 
2.37.3.998.g577e59143f-goog


-- 
Dmitry

             reply	other threads:[~2022-09-23  4:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-23  4:51 Dmitry Torokhov [this message]
2022-09-23 10:06 ` [PATCH] spi: spi-mpc52xx: switch to using gpiod API Andy Shevchenko
2022-09-23 17:21 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yy07WbMAG4bPgYNd@google.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.