Re: [PATCH v2 1/1] media: v4l: subdev: Document s_power() callback is deprecated

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Laurent,

On Tue, Sep 20, 2022 at 01:18:36AM +0300, Laurent Pinchart wrote:
> On Tue, Sep 20, 2022 at 01:16:41AM +0300, Sakari Ailus wrote:
> > Runtime PM has been around for a decade or more, there's hardly a need to
> > use the V4L2 specific s_power() callback in drivers anymore. Document this
> > in s_power() callback documentation as well.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> >  include/media/v4l2-subdev.h | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> > index 2f80c9c818ed0..54566d139da79 100644
> > --- a/include/media/v4l2-subdev.h
> > +++ b/include/media/v4l2-subdev.h
> > @@ -176,7 +176,10 @@ struct v4l2_subdev_io_pin_config {
> >   * @s_register: callback for VIDIOC_DBG_S_REGISTER() ioctl handler code.
> >   *
> >   * @s_power: puts subdevice in power saving mode (on == 0) or normal operation
> > - *	mode (on == 1).
> > + *	mode (on == 1). DEPRECATED. See
> > + *	Documentation/driver-api/media/camera-sensor.rst . pre_streamon and
> 
> Extra space before '.'

That's intended. It's easier to select that way.

> 
> > + *	post_streamoff callbacks can be used for e.g. setting the bus to LP-11
> > + *	mode before s_stream is called.
> 
> Technically post_streamoff doesn't really match that description, but
> that's OK.

Hopefully we can remove this soon... there seem to be 26 users left under
drivers/media and most of them are camera sensor drivers.

> 
> >   *
> >   * @interrupt_service_routine: Called by the bridge chip's interrupt service
> >   *	handler, when an interrupt status has be raised due to this subdev,
> 

-- 
Regards,

Sakari Ailus