From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Subject: [GIT PULL] KVM: x86: First batch of updates for 6.1, i.e. kvm/queue
Date: Tue, 20 Sep 2022 23:16:59 +0000 [thread overview]
Message-ID: <YypJ62Q9bHXv07qg@google.com> (raw)
First batch of x86 updates for 6.1, i.e. for kvm/queue. I was planning to get
this out (much) earlier and in a smaller batch, but KVM Forum and the INIT bug
I initially missed in the nested events series threw a wrench in those plans.
Note, there's one arm64 patch hiding in here to account KVM's stage-2 page
tables in the kernel's memory stats.
For 6.1, I am planning/hoping on also grabbing:
- APICv/AVIC fixes/cleanups (Sean)
- The aforementioned nested events series (Paolo, Sean)
- Hyper-V TLB flush enhancements (Vitaly)
- Small-ish PMU fixes (Like, Sean)
- Misc cleanups (Miaohe, et al)
There are also three patches/series that should probably go into 6.0, but if
that doesn't happen they definitely need to go into 6.1:
https://lore.kernel.org/all/20220802071240.84626-1-cloudliang@tencent.com
https://lore.kernel.org/all/20220907080657.42898-1-linmiaohe@huawei.com
https://lore.kernel.org/all/20220824033057.3576315-1-seanjc@google.com
Thanks!
The following changes since commit 372d07084593dc7a399bf9bee815711b1fb1bcf2:
KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE() (2022-08-19 07:38:05 -0400)
are available in the Git repository at:
https://github.com/sean-jc/linux.git tags/kvm-x86-6.1-1
for you to fetch changes up to 5df50a4a9b60afba4dd2be76d0f0fb8ae8c9beab:
KVM: x86: Allow force_emulation_prefix to be written without a reload (2022-09-20 12:40:25 -0700)
----------------------------------------------------------------
KVM x86 updates for 6.1, batch #1:
- Account x86 and arm64 page table allocations in memory stats.
- Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR accesses.
- Drop eVMCS controls filtering for KVM on Hyper-V, all known versions of
Hyper-V now support eVMCS fields associated with features that are
enumerated to the guest.
- Use KVM's sanitized VMCS config to generate "default" nested VMX MSR
values.
- Myriad event/exception fixes and cleanups, most notably to morph pending
exceptions to VM-Exits (if they're intercepted) when the exception is
queued, e.g. to avoid incorrectly triggering #DF.
- Precisely track NX huge page accounting.
- A handful of fixes for memory leaks in error paths.
- Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow.
- Misc typo cleanups.
----------------------------------------------------------------
Aaron Lewis (1):
KVM: x86: Delete duplicate documentation for KVM_X86_SET_MSR_FILTER
David Matlack (1):
KVM: nVMX: Add tracepoint for nested VM-Enter
Hou Wenlong (2):
KVM: x86: Return emulator error if RDMSR/WRMSR emulation failed
KVM: x86: Add missing trace points for RDMSR/WRMSR in emulator path
Jilin Yuan (1):
KVM: x86/mmu: fix repeated words in comments
Jim Mattson (1):
KVM: x86: VMX: Replace some Intel model numbers with mnemonics
Jinpeng Cui (1):
KVM: x86/mmu: remove superfluous local variable "r"
Junaid Shahid (1):
kvm: x86: Do proper cleanup if kvm_x86_ops->vm_init() fails
Liam Ni (1):
KVM:x86: Clean up ModR/M "reg" initialization in reg op decoding
Miaohe Lin (2):
KVM: x86/mmu: fix memoryleak in kvm_mmu_vendor_module_init()
KVM: fix memoryleak in kvm_init()
Michal Luczaj (1):
KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
Mingwei Zhang (3):
KVM: x86: Update trace function for nested VM entry to support VMX
KVM: x86: Print guest pgd in kvm_nested_vmenter()
KVM: x86/mmu: explicitly check nx_hugepage in disallowed_hugepage_adjust()
Oliver Upton (1):
KVM: selftests: Require DISABLE_NX_HUGE_PAGES cap for NX hugepage test
Paolo Bonzini (1):
KVM: SVM: remove unnecessary check on INIT intercept
Sean Christopherson (44):
KVM: x86: Use u64 for address and error code in page fault tracepoint
KVM: x86: Check for existing Hyper-V vCPU in kvm_hv_vcpu_init()
KVM: x86: Report error when setting CPUID if Hyper-V allocation fails
KVM: nVMX: Treat eVMCS as enabled for guest iff Hyper-V is also enabled
KVM: nVMX: Use CC() macro to handle eVMCS unsupported controls checks
KVM: nVMX: WARN once and fail VM-Enter if eVMCS sees VMFUNC[63:32] != 0
KVM: nVMX: Don't propagate vmcs12's PERF_GLOBAL_CTRL settings to vmcs02
KVM: nVMX: Always emulate PERF_GLOBAL_CTRL VM-Entry/VM-Exit controls
KVM: VMX: Don't toggle VM_ENTRY_IA32E_MODE for 32-bit kernels/KVM
KVM: VMX: Adjust CR3/INVPLG interception for EPT=y at runtime, not setup
KVM: x86/mmu: Bug the VM if KVM attempts to double count an NX huge page
KVM: x86/mmu: Tag disallowed NX huge pages even if they're not tracked
KVM: x86/mmu: Rename NX huge pages fields/functions for consistency
KVM: x86/mmu: Properly account NX huge page workaround for nonpaging MMUs
KVM: x86/mmu: Set disallowed_nx_huge_page in TDP MMU before setting SPTE
KVM: x86/mmu: Track the number of TDP MMU pages, but not the actual pages
KVM: x86/mmu: Add helper to convert SPTE value to its shadow page
KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS
KVM: x86: Don't check for code breakpoints when emulating on exception
KVM: x86: Allow clearing RFLAGS.RF on forced emulation to test code #DBs
KVM: x86: Suppress code #DBs on Intel if MOV/POP SS blocking is active
KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like
KVM: nVMX: Prioritize TSS T-flag #DBs over Monitor Trap Flag
KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1)
KVM: x86: Use DR7_GD macro instead of open coding check in emulator
KVM: nVMX: Ignore SIPI that arrives in L2 when vCPU is not in WFS
KVM: nVMX: Unconditionally clear mtf_pending on nested VM-Exit
KVM: VMX: Inject #PF on ENCLS as "emulated" #PF
KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception
KVM: x86: Make kvm_queued_exception a properly named, visible struct
KVM: x86: Formalize blocking of nested pending exceptions
KVM: x86: Use kvm_queue_exception_e() to queue #DF
KVM: x86: Hoist nested event checks above event injection logic
KVM: x86: Evaluate ability to inject SMI/NMI/IRQ after potential VM-Exit
KVM: nVMX: Add a helper to identify low-priority #DB traps
KVM: nVMX: Document priority of all known events on Intel CPUs
KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
KVM: selftests: Add an x86-only test to verify nested exception queueing
KVM: x86: Allow force_emulation_prefix to be written without a reload
Uros Bizjak (2):
KVM/VMX: Avoid stack engine synchronization uop in __vmx_vcpu_run
KVM: VMX: Do not declare vmread_error() asmlinkage
Vitaly Kuznetsov (23):
x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition
x86/hyperv: Update 'struct hv_enlightened_vmcs' definition
KVM: x86: Zero out entire Hyper-V CPUID cache before processing entries
KVM: nVMX: Refactor unsupported eVMCS controls logic to use 2-d array
KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields
KVM: nVMX: Support several new fields in eVMCSv1
KVM: x86: hyper-v: Cache HYPERV_CPUID_NESTED_FEATURES CPUID leaf
KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields
KVM: selftests: Switch to updated eVMCSv1 definition
KVM: nVMX: Support PERF_GLOBAL_CTRL with enlightened VMCS
KVM: VMX: Get rid of eVMCS specific VMX controls sanitization
KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config()
KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING in setup_vmcs_config()
KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING in setup_vmcs_config()
KVM: VMX: Extend VMX controls macro shenanigans
KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config()
KVM: VMX: Add missing VMEXIT controls to vmcs_config
KVM: VMX: Add missing CPU based VM execution controls to vmcs_config
KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()
KVM: nVMX: Always set required-1 bits of pinbased_ctls to PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR
KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs
KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config
KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR
Wonhyuk Yang (1):
KVM: Add extra information in kvm_page_fault trace point
Yosry Ahmed (3):
mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.
KVM: x86/mmu: count KVM mmu usage in secondary pagetable stats.
KVM: arm64/mmu: count KVM s2 mmu usage in secondary pagetable stats
ye xingchen (1):
KVM: x86: Remove the unneeded "ret" in kvm_vm_ioctl_set_tss_addr()
Documentation/admin-guide/cgroup-v2.rst | 5 +
Documentation/filesystems/proc.rst | 4 +
Documentation/virt/kvm/api.rst | 113 ++--------------------
arch/arm64/kvm/mmu.c | 36 ++++++-
arch/x86/include/asm/hyperv-tlfs.h | 22 ++++-
arch/x86/include/asm/kvm-x86-ops.h | 2 +-
arch/x86/include/asm/kvm_host.h | 67 ++++++++------
arch/x86/kvm/cpuid.c | 18 +++-
arch/x86/kvm/emulate.c | 31 +++----
arch/x86/kvm/hyperv.c | 70 +++++++-------
arch/x86/kvm/hyperv.h | 6 +-
arch/x86/kvm/mmu/mmu.c | 142 ++++++++++++++++++----------
arch/x86/kvm/mmu/mmu_internal.h | 33 +++----
arch/x86/kvm/mmu/paging_tmpl.h | 8 +-
arch/x86/kvm/mmu/spte.c | 12 +++
arch/x86/kvm/mmu/spte.h | 17 ++++
arch/x86/kvm/mmu/tdp_mmu.c | 55 +++++++----
arch/x86/kvm/mmu/tdp_mmu.h | 2 +
arch/x86/kvm/svm/nested.c | 124 ++++++++++++-------------
arch/x86/kvm/svm/svm.c | 32 +++----
arch/x86/kvm/trace.h | 49 +++++++---
arch/x86/kvm/vmx/capabilities.h | 14 +--
arch/x86/kvm/vmx/evmcs.c | 190 +++++++++++++++++++++++++------------
arch/x86/kvm/vmx/evmcs.h | 10 +-
arch/x86/kvm/vmx/nested.c | 435 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------
arch/x86/kvm/vmx/nested.h | 2 +-
arch/x86/kvm/vmx/sgx.c | 2 +-
arch/x86/kvm/vmx/vmenter.S | 24 ++---
arch/x86/kvm/vmx/vmx.c | 315 ++++++++++++++++++++++++++++++--------------------------------
arch/x86/kvm/vmx/vmx.h | 172 +++++++++++++++++++++++++++++-----
arch/x86/kvm/vmx/vmx_ops.h | 2 +-
arch/x86/kvm/x86.c | 536 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
arch/x86/kvm/x86.h | 11 ++-
drivers/base/node.c | 2 +
fs/proc/meminfo.c | 2 +
include/linux/kvm_host.h | 13 +++
include/linux/mmzone.h | 1 +
mm/memcontrol.c | 1 +
mm/page_alloc.c | 6 +-
mm/vmstat.c | 1 +
tools/testing/selftests/kvm/.gitignore | 1 +
tools/testing/selftests/kvm/Makefile | 1 +
tools/testing/selftests/kvm/include/x86_64/evmcs.h | 45 ++++++++-
tools/testing/selftests/kvm/include/x86_64/svm_util.h | 7 +-
tools/testing/selftests/kvm/include/x86_64/vmx.h | 53 +----------
tools/testing/selftests/kvm/x86_64/nested_exceptions_test.c | 295 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c | 24 ++---
virt/kvm/kvm_main.c | 7 +-
48 files changed, 1957 insertions(+), 1063 deletions(-)
create mode 100644 tools/testing/selftests/kvm/x86_64/nested_exceptions_test.c
next reply other threads:[~2022-09-20 23:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 23:16 Sean Christopherson [this message]
2022-09-21 14:46 ` [GIT PULL] KVM: x86: First batch of updates for 6.1, i.e. kvm/queue Sean Christopherson
2022-09-22 19:41 ` Sean Christopherson
2022-09-26 16:09 ` Paolo Bonzini
2022-09-26 16:23 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YypJ62Q9bHXv07qg@google.com \
--to=seanjc@google.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.