Re: [PATCH v5 07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

[Wolfram Sang <wsa@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1042 bytes --]

On Wed, Sep 21, 2022 at 09:51:59AM -0600, Raul E Rangel wrote:
> Device tree already has a mechanism to pass the wake_irq. It does this
> by looking for the wakeup-source property and setting the
> I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> ACPI interrupt wake flag to determine if the interrupt can be used to
> wake the system. Previously the i2c drivers had to make assumptions and
> blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> If there is a device with an Active Low interrupt and the device gets
> powered off while suspending, the interrupt line will go low since it's
> no longer powered and wakes the system. For this reason we should
> respect the board designers wishes and honor the wake bit defined on the
> interrupt.
> 
> Signed-off-by: Raul E Rangel <rrangel@chromium.org>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 

Acked-by: Wolfram Sang <wsa@kernel.org>


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]