[PATCH net-next 00/13] net: add negotiation of in-band capabilities

["Russell King (Oracle)" <linux@armlinux.org.uk>]

Hi,

This is a repost without RFC for this series, shrunk down to 13 patches
by removing the non-Marvell PCS.

Phylink's handling of in-band has been deficient for a long time, and
people keep hitting problems with it. Notably, situations with the way-
to-late standardized 2500Base-X and whether that should or should not
have in-band enabled. We have also been carrying a hack in the form of
phylink_phy_no_inband() for a PHY that has been used on a SFP module,
but has no in-band capabilities, not even for SGMII.

When phylink is trying to operate in in-band mode, this series will look
at the capabilities of the MAC-side PCS and PHY, and work out whether
in-band can or should be used, programming the PHY as appropriate. This
includes in-band bypass mode at the PHY.

We don't... yet... support bypass on the MAC side PCS, because that
requires yet more complexity.

Patch 1 passes struct phylink and struct phylink_pcs into
phylink_pcs_neg_mode() so we can look at more state in this function in
a future patch.

Patch 2 splits "cur_link_an_mode" (the MLO_AN_* mode) into two separate
purposes - a requested and an active mode. The active mode is the one
we will be using for the MAC, which becomes dependent on the result of
in-band negotiation.

Patch 3 adds debug to phylink_major_config() so we can see what is going
on with the requested and active AN modes.

Patch 4 adds to phylib a method to get the in-band capabilities of the
PHY from phylib. Patches 5 and 6 add implementations for BCM84881 and
some Marvell PHYs found on SFPs.

Patch 7 adds to phylib a method to configure the PHY in-band signalling,
and patch 8 implements it for those Marvell PHYs that support the method
in patch 4.

Patch 9 does the same as patch 4 but for the MAC-side PCS, with patches
10 and 11 adding support to Marvell NETA and PP2.

Patch 12 adds the code to phylink_pcs_neg_mode() which looks at the
capabilities, and works out whether to use in-band or out-band mode for
driving the link between the MAC PCS and PHY.

Patch 13 removes the phylink_phy_no_inband() hack now that we are
publishing the in-band capabilities from the BCM84881 PHY driver.

Three more PCS, omitted from this series due to the limit of 15 patches,
will be sent once this has been merged.

 drivers/net/ethernet/marvell/mvneta.c           |  27 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |  25 +-
 drivers/net/phy/bcm84881.c                      |  10 +
 drivers/net/phy/marvell.c                       |  48 ++++
 drivers/net/phy/phy.c                           |  53 ++++
 drivers/net/phy/phylink.c                       | 352 +++++++++++++++++++-----
 include/linux/phy.h                             |  34 +++
 include/linux/phylink.h                         |  17 ++
 8 files changed, 474 insertions(+), 92 deletions(-)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!